Grzegorz Rogojsz

Dr. Grzegorz Rogojsz

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
In the article, the authors presented the results of research on the assessment of the effect of selected mineral additives on the strength properties of the standard mortar. The modification of the composition of the standard mortar made on the basis of CEM I 42.5R cement and quartz sand consisted of using seven selected mineral additives in the form of compacted microsilica, Mikrosill microsilica, limestone flour, glass flour, glass granulate, basalt flour, and fly ash in the amounts of 10 and 20% in relation to cement as its substitute. Reducing the share of cement in the standard mortar by 10% has a beneficial effect on improving the compressive strength by over 40% with the addition of microsilica, and in the case of bending strength, even by 10%.

24 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
In this article, the authors present the results of their research on assessing the effect of selected mineral additives on the alkaline reactivity of aggregates. The main objective of this research was to check whether the reactivity of aggregates that do not meet the standard requirements can be reduced. Due to the decreasing availability of crushed aggregates and the decreasing resources of sand used for cement concrete road surfaces, solutions should be sought that allow the use of lower-grade aggregates. Among the available mineral additives, dense microsilica, white microsilica, limestone flour, glass flour, basalt flour, and glass granulate were selected. Laboratory tests were carried out in accordance with the requirements for testing the alkaline reactivity of road aggregates in NaOH solution applicable in Poland. The tests included the use of mineral additives in the amounts of 10% and 20%. Based on the research conducted, it was observed that the most beneficial effect was obtained with the addition of white microsilica, for which a decrease in aggregate reactivity was observed by 76.7% for 10% of the additive and 95.8% for 20% of the content. The least beneficial effect, on the other hand, was the use of compacted microsilica, for which an increase in alkaline reactivity was observed by 9.3% for 10% of the additive and 20.9% for 20% of the additive. The research conducted shows that the alkaline reactivity of the aggregate can be reduced, due to which it is possible to use reactive aggregates for the construction of road surfaces made of cement concrete.

9 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
MKMagdalena Krzemińska
Magdalena Krzemińska
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
In this article, the authors presented the results of research evaluating the impact of mineral wool on the properties of asphalt mixtures intended for the wearing course. The primary goal of the research was to assess the suitability of granulated mineral wool as a modifier for asphalt mixtures, improving their strength and performance parameters. The research methodology was selected in accordance with the requirements of national technical documents. The analysis of the mineral wool’s impact was conducted for AS 11 S asphalt concrete at 0.5%, 1.0%, and 1.2% by weight of the asphalt mixture. Based on the research, it was concluded that the use of mineral wool reduced the stability of the samples and increased settlement in the Marshall test, which was its only negative effect. Furthermore, the addition of 1.0% mineral wool increases the resistance of samples to water and frost by 31%, while the addition of 1.2% mineral wool increases the stiffness of asphalt concrete by 35% at a reference temperature of 5 °C and by 15% at reference temperatures of 10 °C and 15 °C. It was found that the use of mineral wool as an additive allows for a reduction in the maximum rut by up to 50% and the slope of the rutting graph by 73%.

19 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
WIWlodzimierz Stanislaw Idczak
Wlodzimierz Stanislaw Idczak
TLTomasz Lewandrowski
Tomasz Lewandrowski
DPDominik Pokropski
Dominik Pokropski
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
The presented article concentrates on the influence of various concrete additives in the form of fibers on the mechanical parameters of concrete so as to obtain the effect of gradual changes in these parameters, which is very important in the transition zone of the railway track. Steel, polymer and glass fibers, as well as concrete without additives, were accepted for the study. The effect of additives on the consistency of the mixture, compressive strength, frost resistance and elastic modulus was studied. The research concerned concrete samples and models of elements of the ballastless railway surface, i.e., track slab and concrete block supports. The track slab model was made of concrete without additives, while the models of supports were made both without and with additives. The studies were carried out in laboratory conditions. As a result, the tested concrete samples with various additives were ranked so that they could be used as a material for elements of the railway surface in the transition zones of engineering facilities on railway roads, which is important from the point of view of reducing the threshold effect occurring in these zones. Detailed laboratory tests were presented, the results of these studies were discussed, and final conclusions were drawn regarding the technology of materials and the methodology of constructing the transition zones of the railway surface in order to avoid or at least reduce the threshold effect existing in such zones.

17 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
PMPawel Muzolf
Pawel Muzolf
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
The main goal of the research was to determine whether it was possible to reduce the cement content in mortar without compromising strength parameters. This is crucial for reducing the carbon footprint associated with cement production. In this article, the authors presented the results of research evaluating the effect of selected mineral additives on the strength properties of standard mortar after 7, 28, and 56 days of curing. The analysis of the effect of mineral additives was performed for CEM II and CEM III cements and seven selected mineral additives: white microsilica, Mikrosill+ microsilica, limestone powder, glass powder, glass granulate, and basalt powder. The study considered the use of mineral additives at 10% and 20% by weight of cement as a substitute. During the analysis of the test results, it was observed that the use of white microsilica and Mikrosill+ at 10% and 20% increased strength by approximately 50% compared to the reference samples. Importantly, strength was 50% higher with a 20% reduction in cement content. A positive effect of additives on strength parameters was observed only for CEMII cement. In the case of CEMIII cement, mineral additives reduce compressive strength.

19 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
Microsilica is a commonly used additive in cementitious materials due to its high amorphous SiO2 content, very small particle size, and high pozzolanic activity. However, its effectiveness may depend not only on the chemical composition and physical properties of the material but also on the method of its incorporation into the cement mixture. The aim of the study was to evaluate the effect of dry and slurry dosing of three microsilicas with different chemical compositions and grain size characteristics on the consistency and mechanical properties of standard mortar. White microsilica (MKb), compacted microsilica (MZ), and Mikrosill+ microsilica (MK+) were used in the study at concentrations of 1%, 3%, 5%, and 7% by weight of cement. In the slurry dosing method, the microsilica was added to part of the mixing water, and the prepared slurries were conditioned for three days before sample preparation. Material properties were assessed based on particle size distribution analysis and SEM microscopic observations, while mortar properties were assessed based on consistency and bending and compressive strength after 7, 28, and 56 days of curing. The obtained results showed that the effect of dosing method was not clear and depended on the type of microsilica, its content, sample age, and the type of strength tested. In the case of compressive strength, the dosing in the form of an aqueous suspension was more favorable in many systems after 7 days, while after 56 days, in most cases, higher values were obtained for dry-dosed microsilicas. In the case of bending strength, more favorable results were generally obtained at a younger age for dry-dosed microsilicas, while after 56 days, this relationship was less clear. Granulometric analysis revealed differences in the formation and disintegration of agglomerates of the tested microsilicas upon contact with water. The results indicate that the effectiveness of the microsilica dosing method cannot be assessed independently of the properties of the specific material and the mortar maturation age.