Wlodzimierz Stanislaw Idczak

Mr. Wlodzimierz Stanislaw Idczak

Military University of Technology in Warsaw, Warsaw, Mazowieckie, Poland
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
PKPaulina Kozera
Paulina Kozera
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
Rafał KozeraRafał Kozera
Rafał Kozera
Marcin MałekMarcin Małek
Marcin Małek
WIWlodzimierz Stanislaw Idczak
Wlodzimierz Stanislaw Idczak
The paper presents the experimental results of static and dynamic compressive tests conducted on ceramic-elastomer composites. The alumina ceramic preforms were fabricated by the four-step method: ceramic mixture preparation, consolidation under pressure, presintering, and sintering under pressure, respectively. To obtain ceramic preforms with a similar volume fraction of open pores, but with different pore sizes, alumina powder with different particle size and a ceramic binder were used, as well as pore-forming agents that were evenly distributed throughout the volume of the molding mass. The composites were obtained using vacuum pressure infiltration of porous alumina ceramic by urea-urethane elastomer in liquid form. As a result, the obtained composites were characterized by two phases that interpenetrated three-dimensionally and topologically throughout the microstructure. The microstructure of the ceramic preforms was revealed by X-ray tomography, which indicated that the alumina preforms had similar porosity of approximately 40% vol. but different pore diameter in the range of 6 to 34 µm. After composite fabrication, image analysis was carried out. Due to the microstructure of the ceramic preforms, the composites differed in the specific surface fraction of the interphase boundaries (Sv). The highest value of the Sv parameter was achieved for composite fabricated by infiltration method of using ceramic preform with the smallest pore size. Static and dynamic tests were carried out using different strain rate: 1.4·10−3, 7·10−2, 1.4·10−1, and 3·103 s−1. Compressive strength, stress at plateau zone, and absorbed energy were determined. It was found that the ceramic-elastomer composites’ ability to absorb energy depended on the specific surface fraction of the interphase boundaries and achieved a value between 15.3 MJ/m3 in static test and 51.1 MJ/m3 for dynamic strain rate.

14 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
WIWlodzimierz Stanislaw Idczak
Wlodzimierz Stanislaw Idczak
TLTomasz Lewandrowski
Tomasz Lewandrowski
DPDominik Pokropski
Dominik Pokropski
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
JTJacek Trzmiel
Jacek Trzmiel
The paper undertakes analysis of the dynamic impact of a rail vehicle on various types of a railway infrastructure with particular focus on the phenomenon of threshold effect within the transition zones of an engineering facility. The problem of locally variable stiffness of the railway infrastructure, which in turn could lead to the accelerated infrastructure degradation, is identified. Using the analytical and numerical background, the computational model is presented, based on which, it could be possible to determine the impact of the various rail support on the dynamic response of the entire infrastructure. The dynamic load, caused by the passage of the multiaxle rail vehicle, is taken into account in the paper. The fourth-order differential equation is solved by using the finite differences method with application of the numerical MATLAB script. The created numerical algorithm and a number of calculations allowed the formulation of several solutions that could reduce the dynamic impact of the rail vehicle on the railway surface within the transition zones. In the paper, theoretical results are compared to the field measurements conducted on a real dynamically loaded rail. Field experiments have been carried out on the railway track in operation. The vertical displacement of a rail, dynamically loaded by various types of rail vehicles passing by (both passenger and freight trains) has been investigated. Researches have been carried out in the area of transition zones of engineering facilities. Test points have been selected in places where there is a sudden change in parameters of the track structure (e.g., a change from concrete sleepers to wooden sleepers). Based on conducted researches it has been possible to validate results obtained from the numerical calculations.

19 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
WIWlodzimierz Stanislaw Idczak
Wlodzimierz Stanislaw Idczak
TLTomasz Lewandrowski
Tomasz Lewandrowski
DPDominik Pokropski
Dominik Pokropski
GRGrzegorz Rogojsz
Grzegorz Rogojsz
Tomasz RudnickiTomasz Rudnicki
Tomasz Rudnicki
The presented article concentrates on the influence of various concrete additives in the form of fibers on the mechanical parameters of concrete so as to obtain the effect of gradual changes in these parameters, which is very important in the transition zone of the railway track. Steel, polymer and glass fibers, as well as concrete without additives, were accepted for the study. The effect of additives on the consistency of the mixture, compressive strength, frost resistance and elastic modulus was studied. The research concerned concrete samples and models of elements of the ballastless railway surface, i.e., track slab and concrete block supports. The track slab model was made of concrete without additives, while the models of supports were made both without and with additives. The studies were carried out in laboratory conditions. As a result, the tested concrete samples with various additives were ranked so that they could be used as a material for elements of the railway surface in the transition zones of engineering facilities on railway roads, which is important from the point of view of reducing the threshold effect occurring in these zones. Detailed laboratory tests were presented, the results of these studies were discussed, and final conclusions were drawn regarding the technology of materials and the methodology of constructing the transition zones of the railway surface in order to avoid or at least reduce the threshold effect existing in such zones.