Renewal in the world production of plastics with growing amounts of building blocks from biomass is a pressing demand among society. Adipic acid is one of the monomers of nylon 6,6, and, traditionally, is obtained from fossil sources, but it is possible to reduce the muconic acids, deriving it from biomass, to obtain adipic acid. However, these catalyzed reactions use commonly hazardous conditions or reagents; in this study, a pathway to obtain a bio-adipic acid, following the Green Chemistry, is reported. Metal nanoparticles (M NPs; M = Pd, Pt, Ru, Rh) were synthesized in water at 80 °C using sodium lignosulphonate as a reducing and stabilizing agent. They were characterized by TEM and XRD techniques: Pd NPs were larger (21 nm) and spherical in shape; Pt NPs were irregular; Ru and Rh NPs were smallest (1.9 and 5.3 nm, respectively). M NPs were tested as catalyst in the hydrogenation reactions of dicarboxylic acids (fumaric, malonic, trans,trans- and cis,cis-muconic acids) in water at room pressure and temperature. The NPs transformed selectively fumaric and malonic acids to succinic acid, although with different yields. Ru and Pt NPs were moderately active while with Pd NPs, 80% of succinic acid was obtained and with Rh NPs, 100% was observed. Carrying out the hydrogenations on muconic acids at pH 5, the formation of adipic acid was observed with all NPs but selectivities in the presence of Ru, Pt and Pd NPs were not excellent. The selectivity with Rh NPs was remarkable (86% from cis,cis- and about 100% from trans,trans-muconic acid) considering the mild conditions; furthermore, it is attractive that the adipic acid was obtained also from the cis,cis isomer which can be produced from biomass.

A new easy protocol to functionalize the middle layer of commercial surgical face masks (FMs) with Zn and Cu oxides is proposed in order to obtain antibacterial personal protective equipment. Zinc and copper oxides were synthesized embedded in a polydopamine (PDA) shell as potential antibacterial agents; they were analyzed by XRD and TEM, revealing, in all the cases, the formation of metal oxide nanoparticles (NPs). PDA is a natural polymer appreciated for its simple and rapid synthesis, biocompatibility, and high functionalization; it is used in this work as an organic matrix that, in addition to stabilizing NPs, also acts as a diluent in the functionalization step, decreasing the metal loading on the polypropylene (PP) surface. The functionalized middle layers of the FMs were characterized by SEM, XRD, FTIR, and TXRF and tested in their bacterial-growth-inhibiting effect against Klebsiella pneumoniae and Staphylococcus aureus. Among all functionalizing agents, Cu₂O-doped-ZnO NPs enclosed in PDA shell, prepared by an ultrasound-assisted method, showed the best antibacterial effect, even at low metal loading, without changing the hydrophobicity of the FM. This approach offers a sustainable solution by prolonging FM lifespan and reducing material waste.

Glycerol (GL) represents a widespread agro‐industrial waste. Its valorization is pivotal for a sustainable society because GL is a renewable compound deriving from biomass, but it has a high oxygen to carbon ratio, compared with feedstock used in the energy and chemistry sectors. Oxygen‐poor derivatives are easily and immediately transferable to the industry, avoiding a deep and pressing modification of the plants. From this perspective, keeping the carbon content but with an oxygen content reduction, we could effectively obtain the enhancement of the recovery and the use of GL converting it into attractive industrial building‐blocks. In this Review, we present and discuss the up‐to‐date results about the chemical reduction of GL into products with 3 carbon and 0, 1, or 2 oxygen atoms. The focus is on the transition metal (TM) catalysts that have made the hydrogenation reactions of GL possible, partitioning the metals into early and late, based on their position in the periodic table. This discussion will contribute to select and develop new catalysts aimed at the improvement of the yield and of the selectivity in the hydrogenation reactions of GL.

CO₂ emissions from various anthropogenic activities have led to serious global concerns (climate change and global warming), and, therefore, CO₂ capture by sustainable methods is a priority research topic. One of the most widely used and cost-effective technologies for post-combustion CO₂ capture (PCC) is the chemical absorption method, where potassium carbonate solution is proposed as a solvent (with or without the addition of promoters, such as amines). An ecological alternative, presented in this study, is the use of amino acids instead of amines as promoters—alanine (Ala), glycine (Gly) and sarcosine (Sar)—in concentrations of 25% by weight of K₂CO₃ + 5 or 10% by weight of amino acid salt, thus resulting in the so-called green solvents, which do not show high toxicity and inertness to biodegradability. The studies had as a first objective the characterization of the proposed green solvents, in terms of density and viscosity, and then the comparative testing of their efficiency for CO₂ retention from gaseous fluxes containing high CO₂ concentrations. The experiments were performed at temperatures of 298 K, 313 K, and 333 K at atmospheric pressure. The best performance was observed with K₂CO₃ + 5% Sar salt at 313 K, reaching an absorption capacity of 2.58 mol CO₂/L solvent, which is a promising improvement over the reference solution based on K₂CO₃. Increasing the amino acid concentration to 10% generally led to a reduced performance, especially for sarcosine, probably due to an increase in solution viscosity or a possible kinetic inhibition. This study provides valuable experimental data supporting the ecological potential of amino acid-promoted potassium carbonate systems, paving the way for further development of chemisorption processes and their implementation on an industrial scale.

The development of effective photocatalysts for environmental applications is still a critical aspect of green chemistry. This study explores copper oxide (Cu_xO) catalysts supported on titanium dioxide (TiO₂) and zinc oxide (ZnO) for the photocatalytic reduction of maleic acid to succinic acid under ultraviolet (UV) light in water. The main goal was to evaluate the performance of CuO/ZnO compared to CuO/TiO₂ in photoreduction. In order to improve the efficiency of the first catalyst, an environmentally friendly synthesis, assisted by polydopamine (PDA), was tested, obtaining the Cu₂O/ZnO-PDA catalyst. The results showed that CuO/TiO₂ exhibited the highest activity for maleic acid reduction, obtaining a succinic acid yield and a selectivity of 32% after 24 h of reaction time, but comparable results could be reached even with Cu₂O/ZnO-PDA increasing the reaction time. Furthermore, the addition of sodium ascorbate as a co-catalyst in the reaction mixture allowed us to overtake the previous results, leading to a succinic acid yield of 61% and a selectivity of 67%. These findings suggest that the PDA shell can be a solution for Cu_xO photodegradation, making Cu₂O/ZnO-PDA an alternative to the toxic CuO/TiO₂.