Ramona-Elena Tataru-Farmus

Dr. Ramona-Elena Tataru-Farmus

The Faculty of Chemical Engineering and Environmental Protection, Gheorghe Asachi Technical University of Iași, Iaşi, Romania
orcid
Chemical Engineering for a Greener Tomorrow

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Alexandra BlagaAlexandra Blaga
Alexandra Blaga
ATAlexandra Maria Tanasă
Alexandra Maria Tanasă
Ramona CimpoesuRamona Cimpoesu
Ramona Cimpoesu
Ramona-Elena Tataru-FarmusRamona-Elena Tataru-Farmus
Ramona-Elena Tataru-Farmus
daniela Suteudaniela Suteu
daniela Suteu
The use of a biosorbent based on residual biomass from brewing industry (Saccharomyces pastorianus) immobilized in a natural biopolymer (sodium alginate) was investigated for Methylene Blue removal from aqueous medium. Saccharomyces pastorianus, immobilized by a simple entrapment technique and by microencapsulation in alginate was characterized using SEM, EDAX, pHPZC and the biosorption behavior toward organic pollutant, such as cationic dye. The biosorption experiments were studied by assessing, in a first stage, the influence of the most important operational physical parameters on the efficiency of the biosorbent: the initial concentration of the dye, the contact time between phases, the temperature, the dye solution pH, the biosorbent granule size, and the amount of biosorbent. The highest sorption capacity was obtained for the biosorbent obtained by microencapsulation, at pH 9, at biosorbent dose of 5.28 g/L and a contact time of about 100 min. The biosorption equilibrium was then studied by modeling the data on the Langmuir, Freundlich and Dubinin- Radushkevich isotherms. The Langmuir model is best suited for experimental data on both particle sizes leading to a maximum biosorption capacity of 188.679 mg/g at room temperature. The values of the adsorption energy, E, obtained with the help of the Dubinin-Radushkevich model-suggest that the type of mechanism (physical or chemical) involved in the biosorption process depends on the particle size of the biosorbent. The results confirm that the residual microbial biomass of Saccharomyces pastorianus immobilized in a polymeric matrix such as sodium alginate, can be considered an efficient biosorbent in retaining cationic organic dyes present in aqueous solutions in moderate concentrations.

15 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
NANicolae Apostolescu
Nicolae Apostolescu
Ramona-Elena Tataru-FarmusRamona-Elena Tataru-Farmus
Ramona-Elena Tataru-Farmus
Maria HARJAMaria HARJA
Maria HARJA
MVMihaela Aurelia Vizitiu
Mihaela Aurelia Vizitiu
CCCorina CERNĂTESCU
Corina CERNĂTESCU
AAApostolescu Gabriela Antoaneta
Apostolescu Gabriela Antoaneta
CeO2/ZnO-based photocatalytic materials were synthesized by the sol-gel method in order to establish heterojunctions that increase the degradation efficiency of some types of antibiotics by preventing the recombination of electron–hole pairs. The synthesized materials were analysed by XRD, SEM, EDAX, FTIR, and UV-Vis. After several tests, the optimal concentration of the catalyst was determined to be 0.05 g‧L−1 and 0.025 g‧L−1 for chlortetracycline and 0.05 g‧L−1 for ceftriaxone. CeO2/ZnO assemblies showed much better degradation efficiency compared to ZnO or CeO2 tested individually. Sample S3 shows good photocatalytic properties for the elimination of ceftriaxone and tetracycline both from single solutions and from the binary solution. This work provides a different perspective to identify other powerful and inexpensive photocatalysts for wastewater treatment.

9 December 2021 in Polymers
Verified
Journal Article
Open access
PDF file
daniela Suteudaniela Suteu
daniela Suteu
Alexandra BlagaAlexandra Blaga
Alexandra Blaga
Ramona CimpoesuRamona Cimpoesu
Ramona Cimpoesu
Adrian PuitelAdrian Puitel
Adrian Puitel
Ramona-Elena Tataru-FarmusRamona-Elena Tataru-Farmus
Ramona-Elena Tataru-Farmus
Natural polymers have proven to be extremely interesting matrices for the immobilization of microbial biomasses, via various mechanisms, in order to bring them into a form easier to handle—the form of composites. This article aimed to study composites based on a residual microbial biomass immobilized in sodium alginate via an encapsulation technique as materials with adsorbent properties. Thus, this study focused on the residual biomass resulting from beer production (Saccharomyces pastorianus yeast, separated after the biosynthesis process by centrifugation and dried at 80 °C)—an important source of valuable compounds, used either as a raw material or for transformation into final products with added value. Thus, the biosorptive potential of this type of composite was tested—presenting in the form of spherical microcapsules 900 and 1500 μm in diameter—in a biosorption process applied to aqueous solutions containing the reactive dye Brilliant Red HE-3B (16.88–174.08 mg/L), studied in a batch system. The preparation and characterization of the obtained polymeric composites (pHPZC, SEM, EDS and FTIR spectra) and an analysis of different equilibrium isotherms (Langmuir, Freundlich and Dubinin-Radushkevich—D–R) were investigated in order to estimate the quantitative characteristic parameters of the biosorption process, its thermal effects, and its possible mechanisms of action. The modelling of the experimental data led to the conclusion that the studied biosorption process took place after reaching the Langmuir isotherm (LI), and that the main mechanism was possibly physical, being spontaneous and probably exothermic according to the values obtained for the free energy of biosorption (E = 8.45–13.608 kJ/mol, from the DR equation), as well as the negative values for the Gibbs free energy and the enthalpy of biosorption (ΔH0 = −87.795 kJ/mol). The results obtained lead to the conclusion that encapsulation of this residual microbial biomass in sodium alginate leads to an easier-to-handle form of biomass, thus being an efficient biosorbent for static or dynamic operating systems for effluents containing moderate concentrations of reactive organic dyes.

12 August 2024 in Processes
Verified
Journal Article
Open access
PDF file
CMClaudia Maxim
Claudia Maxim
Alexandra BlagaAlexandra Blaga
Alexandra Blaga
Ramona-Elena Tataru-FarmusRamona-Elena Tataru-Farmus
Ramona-Elena Tataru-Farmus
daniela Suteudaniela Suteu
daniela Suteu
For plant metabolite extraction, natural deep eutectic solvents (NADESs) have many benefits over conventional solvents and ionic liquids. These advantages include high solubility and extraction ability, a low melting point (<100 °C), low toxicity, environmental friendliness, recyclability, and better biodegradability. This study analyses a natural deep eutectic solvent for Acmella oleracea (A. oleracea) metabolite extraction, considering the following process parameters: temperature, component ratio in the eutectic solvent, water addition, solid/liquid ratio, and extraction duration. NADESs were synthesised using a simple heating method, and the synthesis of the NADESs was verified by Fourier transform infrared spectroscopy (FTIR). In terms of total polyphenol content (TPC) and flavonoid content (TFC), the betaine/propanediol ratio in a NADES of 1:3 and S/L = 1:5 yielded the highest efficiency. A value of 8.37 mg GAE/mL was obtained for TPC by ultrasound-assisted extraction with 40% water addition, 25 °C extraction temperature, and 60 min contact time. The best result in terms of TFC was 14.50 mg QE/mL obtained through ultrasound-assisted extraction with 0% water added, 25 °C extraction temperature, and 60 min contact time.

31 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
daniela Suteudaniela Suteu
daniela Suteu
Alexandra BlagaAlexandra Blaga
Alexandra Blaga
Carmen ZahariaCarmen Zaharia
Carmen Zaharia
Ramona CimpoesuRamona Cimpoesu
Ramona Cimpoesu
Adrian PuitelAdrian Puitel
Adrian Puitel
ATAlexandra Maria Tanasă
Alexandra Maria Tanasă
Natural polymers can themselves be efficient as materials with biosorptive properties but can also be used to transform microbial biomass into an easy-to-handle form, respectively, into biosorbents, through immobilization. The article aims to study biosorbents based on residual microbial biomass (Saccharomyces pastorianus yeast, separated after the brewing process by centrifugation and dried at 80 °C) immobilized in sodium alginate. The biosorptive properties of this type of biosorbent (spherical particles 2 and 4 mm in diameter) were studied for removal of reactive dye Brilliant Red HE-3B (with concentration in range of 16.88–174.08 mg/L) from aqueous media. The paper aims at three aspects: (i) the physico-chemical characterization of the biosorbent (Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX) and Fourier Transform Infrared (FTIR) spectra); (ii) the modeling of biosorption data in order to calculate the quantitative characteristic parameters using three equilibrium isotherms (Langmuir, Freundlich, and Dubinin–Radushkevich—DR); and (iii) the evaluation of thermal effect and the possible mechanism of action. The results of the study showed that biosorption capacity evaluated by Langmuir (I) model is 222.22 mg/g (ϕ = 2 mm) and 151.51 mg/g (ϕ = 4 mm) at 30 °C, and the free energy of biosorption (E) is in the range of 8.45–13.608 KJ/mol (from the DR equation). The values of thermodynamic parameters suggested an exothermic process due the negative value of free Gibbs energy (ΔG0 = −9.031 kJ/mol till −3.776 kJ/mol) and enthalpy (about ΔH0 = −87.795 KJ/mol). The obtained results underline our finding that the immobilization in sodium alginate of the residual microbial biomass of Saccharomyces pastorianus led to an efficient biosorbent useful in static operating system in the case of effluents with moderate concentrations of organic dyes.

5 November 2025 in Clean Technologies
Verified
Journal Article
Open access
PDF file
Ramona-Elena Tataru-FarmusRamona-Elena Tataru-Farmus
Ramona-Elena Tataru-Farmus
Maria HARJAMaria HARJA
Maria HARJA
Lucia TonucciLucia Tonucci
Lucia Tonucci
FCFrancesca Coccia
Francesca Coccia
MCMichele Ciulla
Michele Ciulla
Igor CRETESCUIgor CRETESCU
Igor CRETESCU
CO2 emissions from various anthropogenic activities have led to serious global concerns (climate change and global warming), and, therefore, CO2 capture by sustainable methods is a priority research topic. One of the most widely used and cost-effective technologies for post-combustion CO2 capture (PCC) is the chemical absorption method, where potassium carbonate solution is proposed as a solvent (with or without the addition of promoters, such as amines). An ecological alternative, presented in this study, is the use of amino acids instead of amines as promoters—alanine (Ala), glycine (Gly) and sarcosine (Sar)—in concentrations of 25% by weight of K2CO3 + 5 or 10% by weight of amino acid salt, thus resulting in the so-called green solvents, which do not show high toxicity and inertness to biodegradability. The studies had as a first objective the characterization of the proposed green solvents, in terms of density and viscosity, and then the comparative testing of their efficiency for CO2 retention from gaseous fluxes containing high CO2 concentrations. The experiments were performed at temperatures of 298 K, 313 K, and 333 K at atmospheric pressure. The best performance was observed with K2CO3 + 5% Sar salt at 313 K, reaching an absorption capacity of 2.58 mol CO2/L solvent, which is a promising improvement over the reference solution based on K2CO3. Increasing the amino acid concentration to 10% generally led to a reduced performance, especially for sarcosine, probably due to an increase in solution viscosity or a possible kinetic inhibition. This study provides valuable experimental data supporting the ecological potential of amino acid-promoted potassium carbonate systems, paving the way for further development of chemisorption processes and their implementation on an industrial scale.