In this paper, we present a CMOS rail-to-rail second-generation voltage conveyor (VCII) suitable for low power applications, implemented in 180 nm CMOS technology with a supply voltage of ± 0.9 V. The proposed VCII consists of a current and voltage buffer operating in class AB. At the input of the voltage buffer, there is a bulk-driven differential amplifier, which provides a rail-to-rail input common-mode voltage. A common source output stage in class AB provides rail-to-rail at the output of the voltage buffer. The transistors are designed to operate in moderate inversion, achieving a relatively large current and voltage buffer bandwidth of 298.3 MHz and 173.2 MHz, respectively, with a power consumption of 157 μW. A sine wave with an amplitude of 1.5 Vpp and a frequency of 1 MHz on the output buffer has a total harmonic distortion of only 0.29%. The application of VCII in a relaxation oscillator with a frequency of up to 10 MHz is demonstrated, as well as its comparative characteristics with reference to other relevant square-wave generators published in the literature.
1 January 2017 in Serbian Journal of Electrical Engineering
In this paper we propose a method for real-time blob detection in large images with low memory cost. The method is suitable for implementation on the specialized parallel hardware such as multi-core platforms, FPGA and ASIC. It uses parallelism to speed-up the blob detection. The input image is divided into blocks of equal sizes to which the maximally stable extremal regions (MSER) blob detector is applied in parallel. We propose the usage of multiresolution analysis for detection of large blobs which are not detected by processing the small blocks. This method can find its place in many applications such as medical imaging, text recognition, as well as video surveillance or wide area motion imagery (WAMI). We explored the possibilities of usage of detected blobs in the feature-based image alignment as well. When large images are processed, our approach is 10 to over 20 times more memory efficient than the state of the art hardware implementation of the MSER.
A market offers more and more High-Level Synthesis (HLS) tools used for complex digital system design by applying abstract models. In this paper, using SystemC, HLS and programmable logic, an algorithm for calculating zero, first and second order image moments was implemented on several approaches. Effects accomplished by different optimization methods and coding style were analyzed. HLS efficiency and hardware implementations were compared with efficiency of the same algorithm implementations on general purpose processor.
Micro-Electro-Mechanical Systems (MEMS) gyroscopes are widely used in modern inertial navigation and attitude determination systems due to their compact size, low power consumption, and high integration capability. However, their performance is limited by stochastic errors that significantly affect long-term measurement accuracy, especially in navigation applications. This paper presents the stochastic error characterization of a MEMS gyroscope from the STIM300 inertial measurement unit using Allan variance analysis. The main noise components, including angle random walk, bias instability, and rate random walk, are identified and quantified from experimental measurement data. The obtained noise parameters are used for the development of a Kalman filter model aimed at reducing the influence of stochastic errors and improving gyroscope output stability. Experimental results demonstrate the effectiveness of the proposed approach in reducing measurement drift and enhancing the reliability of MEMS-based inertial systems.
This paper presents a unified model of magnetoresistive angular position sensors, applicable to sensors based on the three major sensor technologies: Anisotropic Magnetoresistance, Giant Magnetoresistance, and Tunnel Magnetoresistance magnetoresistive elements. Theoretical models of the three different magnetoresistive elements, including manufacturing tolerances, have been derived first. The models are then employed to derive a realistic model of a magnetoresistive measurement bridge. In order to construct a model of a magnetoresistive magnetic field direction sensor, besides bridge models, a novel model of a free ferromagnetic layer has been developed. Finally, a unified magnetoresistive angular position sensor model has been obtained by combining the magnetic field direction sensor and a simple model of a permanent magnet. The experimental results confirmed the validity of the proposed model.