Binyun Yan

Dr. Binyun Yan

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BYBinyun Yan
Binyun Yan
WSWeixing Sheng
Weixing Sheng
LSLiangyu Sun
Liangyu Sun
ZCZhi Ning Chen
Zhi Ning Chen
A compact wideband and wide-scanning planar triangular-lattice phased array is proposed. The proposed element is a U-slot microstrip antenna surrounded by a substrate-integrated cavity (SIC) structure fed by a 50 Ω coaxial cable. The scan blindness is effectively shifted out of the operation band as the SIC structure obstructs the surface wave and mutual coupling. The proposed array is arranged in a triangular lattice with fewer elements than a rectangular one. A 4×8 planar array prototype is fabricated and measured over X-band. The antenna provides a bandwidth of over 30% frequency range under ±60° scanning in all azimuth planes.

17 May 2024 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
LSLiangyu Sun
Liangyu Sun
AZAshraf Uz Zaman
Ashraf Uz Zaman
BYBinyun Yan
Binyun Yan
WSWeixing Sheng
Weixing Sheng
A compact broadband circularly polarized magneto-electric dipole antenna array (ME-DAA) based on a single-layer ridge gap waveguide (GW) is proposed in the Ka-band. The antenna array consists of a dielectric layer of printed ME-DAA and a single-layer metal corporate network using GW. The U-shaped coupling slot parallel to the feeding ridge is used, avoiding the complexity of conventional cavity layers. The matching section in the feeding ridge is adopted to achieve wideband impedance matching. Besides, by chamfering the classic ME-dipole patches, the axial ratio bandwidth of the antenna is improved. Meanwhile, a ring of metal vias is loaded around each unit to enhance the isolation between array elements, further broadening the total array bandwidth. An 8×8 array prototype is manufactured. The measured impedance bandwidth and axial ratio bandwidth are 22.6% (26.7-33.5 GHz) and 20.2% (26.7-32.7 GHz), respectively. The sidelobe levels of the radiation patterns are better than -12.2 dB. The peak radiation efficiency and aperture efficiency are about 93% and 87%, respectively. And the peak realized gain is upto 27.8 dBic at 31.6 GHz.

29 December 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BYBinyun Yan
Binyun Yan
LSLiangyu Sun
Liangyu Sun
WSWeixing Sheng
Weixing Sheng
ZCZhi Ning Chen
Zhi Ning Chen
A phased array loaded with a reactive impedance surface (RIS) is proposed for wideband wide-scanning performance. The mushroom-like RIS structure, etched on the same printed circuit board (PCB) of the antenna, is introduced as a superstrate over the antenna aperture. The reactance of the RIS structure compensates for the scan impedance variation of the antenna during the beam scanning, explained by the equivalent transmission-line model. A superior scanning performance in all azimuth planes is achieved, and the scan blindness in the H-plane is alleviated, especially. The total compact design is capable of operating over a 2.3:1 (6 –14 GHz) bandwidth in broadside and over a 1.8:1 bandwidth in ±60° E-plane, ±70° D-plane, and ±65° H-plane scanning. The array is implemented in a triangular lattice, and edge elements in the E-plane are connected to metal walls for edge effect elimination. A 45-element ( $5\times 9$ ) array prototype is fabricated and measured. Active reflection coefficients are calculated, and scanning patterns are synthesized.

21 May 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
WZWeiwei Zhou
Weiwei Zhou
WSWeixing Sheng
Weixing Sheng
BYBinyun Yan
Binyun Yan
This letter proposes a wafer-level packaged (WLP) single-chip sequential rotation Crossbar (SR-Crossbar) RF MEMS switch matrix, which has been fabricated and measured. Optimizations are conducted on switch units, including electrically connected seal ring design, DC-RF common ground design, and integrated cross design. The designs effectively simplify the fabrication process and improve compactness of the matrix. Measurements demonstrate that insertion loss of the longest path in this ${8}\times {8}$ SR-Crossbar RF MEMS switch matrix maintains better than -19dB within 0-26.5GHz range. Return loss is better than -18dB, and crosstalk and isolation are both better than -20dB. To the best of the authors’ knowledge, this is the first fabricated single-chip large-scale RF MEMS switch matrix with wafer-level packaging, which exhibits significant performance advantages compared to relevant works.

22 September 2024 in Electronics
Verified
Journal Article
Open access
PDF file
XYXianjing Yuan
Xianjing Yuan
SZSiyuan Zheng
Siyuan Zheng
BYBinyun Yan
Binyun Yan
WSWeixing Sheng
Weixing Sheng
A wideband polarization-reconfigurable microstrip antenna based on a mode-fusion mechanism is proposed. This simple antenna structure consists of a rectangular radiation patch and a ground, both with crossed slots. The slots crossing the ground are connected by eight PIN diodes and four capacitors such that two orthogonal linear-polarization radiation modes can be realized. The radiation patch is slotted such that a transformed TM20 mode is excited, realizing broadside radiation that the traditional TM20 mode is unable to. With fusion of the fundamental TM10 mode and the transformed-TM20 (T-TM20) mode, a wide bandwidth of 30.1% is achieved in two reconfigurable polarizations. The measured results agree well with the simulation results. The total efficiency of the proposed antenna is more than 80.0% over the bandwidth.

6 June 2025 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
SSSong Shuoshuo
Song Shuoshuo
XMXiaofeng Ma
Xiaofeng Ma
BYBinyun Yan
Binyun Yan
TSTing Shu
Ting Shu
The precise mutual coupling model is the key to obtain an accurate parametric analytic manifold, which is the prerequisite to achieve super-resolution direction of arrival estimation and highprecision beamforming. The widely used mutual coupling model is linear and cannot describe the direction-dependent characteristics of mutual coupling, which leads to serious performance deterioration of array signal processing algorithms. In this letter, a new non-linear mutual coupling model named high-order broad mutual coupling matrix (MCM) is established based on the Taylor expansion to describe the directional dependent coupling relationship between two adjacent antenna elements. Then, an accurate parametric analytic manifold using a finite-order approximation of the high-order broad MCM is yield by the antenna pattern reconstruction method. Numerical examples verify that the array manifold reconstruction errors can be reduced exponentially by the proposed parametric analytic manifold. Especially when the piecewise fitting strategy is adopted, the reconstruction errors of the fourth-order approximated analytic manifold can be reduced to less than 1% of those of the conventional array manifold.