Jusang Lee

Dr. Jusang Lee


Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2014 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
JLJusang Lee
Jusang Lee
YKY. Richard Kim
Y. Richard Kim
JLJaejun Lee
Jaejun Lee
This paper presents an evaluation of the rutting performance of geosynthetics in asphalt pavements. The rutting performance of both a fibreglass geogrid and a sheet reinforcement material were evaluated using the third-scale model mobile loading simulator (MMLS3). The surface profile of each type of reinforced slab (and a control slab) was monitored and compared. To investigate movement of the mixtures caused by MMLS3 loading as well as the interfaces of the reinforcements in the asphalt slabs, trench cuts were made once the MMLS3 rutting tests were complete. The results demonstrated that reinforcement can reduce downward ruts and that different types of reinforcement exhibited different shear flow behaviour. The geogrid-reinforced slabs showed the shallowest ruts and the most shear flow resistance due to the tension resistance of the geogrid. They exhibited confinement and increased friction due to the aggregate particles that were locked in the geogrid openings. The sheet-reinforced slabs exhibited the highest shear flow humps due to the lack of interlocking and bonding strength at the rutting test temperature. In addition, the geogrid openings, which were supposed to provide interlocking and anchoring, in fact generated a relatively high volume of voids at the interface between lifts. Further research is needed to evaluate the effects of high air voids at the lift interface on pavement performance.

1 April 2018 in Journal of Construction Engineering and Management
Verified
Journal Article
Closed access
SYSooJin Yoon
SooJin Yoon
Makarand HastakMakarand Hastak
Makarand Hastak
JLJusang Lee
Jusang Lee
Intelligent compaction (IC) is an emerging technology that can be applied to improve the compaction of hot mix asphalt (HMA). This study investigated the applicability of IC technology for the quality control (QC) and/or quality assurance (QA) of HMA compaction through a survey, phone interviews, and a review of IC demonstrations conducted in Indiana. The questionnaire survey gathered information about (1) the field usage of IC technology by state DOTs, (2) the benefits of IC technology, and (3) future plans for IC implementation. Only two state DOTs have adopted IC technology for QC, whereas the other 24 respondents have not applied IC technology for either QC or QA. A review of IC demonstrations conducted on US 52 in Indiana was undertaken to explore the possibility of substituting the nonnuclear density value with the ICMV. Multiple regression analysis of the data (predicted variable: nonnuclear density) indicated a R2 value of 0.67 with statistically significant p-values for the independent variables [i.e., pass count, temperature, and intelligent compaction measurement values (ICMV)]. The results of this research indicate that IC technology would improve both the compaction coverage and the uniform compaction for HMA QC applications, although no solid evidence is available to date to support the possibility of substituting core density values with ICMVs for QA.

24 July 2018 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
YTYu Tian
Yu Tian
JLJusang Lee
Jusang Lee
TNTommy Nantung
Tommy Nantung
JHJohn E. Haddock
John E. Haddock
This paper presents a new method for the local calibration of the rutting models in the Mechanistic–Empirical Pavement Design Guide (MEPDG) for Indiana’s pavements using accelerated pavement testing (APT). The study focused on the verification, calibration, and validation of the rutting models in the MEPDG using both field and APT sections. In this study, a new calibration methodology was developed that uses layer rutting distribution. Also, a procedure was developed to provide the most realistic simulations of APT conditions (climate, traffic, and aging) using virtual weather station data generation, a special traffic configuration, and falling weight deflectometer evaluation. The primary benefits of APT are that it uses test sections with high distress levels and low measurement errors and it provides findings about the contributions of each layer to the total rut depth (i.e., pavement surface rutting). The accuracy of the MEPDG’s rutting prediction models was improved significantly following implementation of the new calibration process. The sum of squared errors (SSE) was reduced by 73% and the standard error of estimates was reduced by 38%. No significant differences were found between the predicted and measured asphalt layer, subgrade, and total rut depths at the 95% confidence level. When compared with the conventional calibration method, which uses the total rut depth without knowing the rut depth of each layer, the proposed method provides more reliable predictions for both asphalt mixture and subgrade rutting, most especially for the latter. The bias and SSE of the predicted subgrade rutting were improved by 46% and 62%, respectively.

1 January 2011
Verified
Report
Open access
PDF file
JLJusang Lee
Jusang Lee
TSTodd Shields
Todd Shields
This project presents pavement treatment practice guidelines and a distress identification manual for the purpose of improving the INDOT pavement preservation practices. The treatment guidelines consist of 10 treatment types for asphalt pavements and composite pavements and 8 treatment types for Portland cement concrete pavement (PCCP). The treatment guidelines include treatment descriptions, benefits, applicable pavement conditions, treatment materials, and treatment procedures. The guidelines are based on information obtained mainly from the INDOT Standard Specification, the INDOT Design Manual, and the INDOT Field Operations Handbook for Crew Leaders. The treatments are covered in the guidelines. The distress identification manual presents the different types of distresses found on the surfaces of asphalt pavement, composite pavement, and PCCP. Each distress type in this manual is presented along with descriptions, causes, measurements, and pictures of each type of distress. The manual is mainly based on the Distress Identification Manual for the Long Term Pavement Performance Program (LTPP) and the INDOT Design Manual. To implement the guidelines and the manuals, training slides were developed and are enclosed in this report. The training slides were developed to address all topics of the pavement preservation treatment area and combine to make one set of training materials suitable for Indiana. The training slides for pavement preservation implementation can help to enhance the overall construction quality of treatments by illustrating the appropriate use of such treatments in applications, thereby contributing to their improved performance. This improvement will help to ensure that the treatments are used to their maximum benefit and efficiency.

1 June 2016 in Construction and Building Materials
Verified
Journal Article
Closed access
HAHyung Jun Ahn
Hyung Jun Ahn
JLJusang Lee
Jusang Lee

1 March 2011 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
JLJusang Lee
Jusang Lee
SLSangyum Lee
Sangyum Lee
YKYoungsoo Kim
Youngsoo Kim
Fatigue life of asphalt concrete pavement is one of the most important factors in pavement management systems, which can be increased by healing effect. The healing effect by rest periods was evaluated by the third scale Model Mobile Loading Simulator (MMLS3) and Nondestructive Evaluation (NDE) techniques. Impact method of stress wave was optimized to accurately analyze the phase velocity and obtain effective sampling depth. In general, the phase velocities decrease as the pavement structure is degraded by the increase of wheel applications or load levels along both of the stress wave and ultra sonic measurement, while the recovery of phase velocities during rest periods is successfully evaluated by both techniques. Finally, based on the observation of phase velocities of waves, it was possible to confirm the healing effect of Asphalt Concrete (AC) by rest periods.