Texture evolution during accumulative roll-bonding (ARB) is complicated because of the change in the through-thickness position that results from repeated cutting–stacking and roll-bonding. In this study, a macro–micro two-scale modeling was carried out to investigate the behaviors of texture evolution during ARB. The finite element method (FEM) was used to predict the strain history at a macro-scale, while a crystal plasticity FEM was used to reproduce the texture at a micro-scale. The texture evolution along three different cutting–stacking paths was traced and investigated. The patterns of texture transition between the rolling-type, shear-type, and random-type textures were studied by using area fractions of texture components, the distribution of textures, and the distribution of crystal rotation angles.
In this study, aluminum single crystals with a {1 0 0} (Cube) orientation were rolled under two conditions: with external constraints imposed by an external aluminum frame (3DRC) and without external constraints (3DR). The crystal plasticity finite element method (CPFEM) was used to simulate texture evolution, and the results corresponded well with experimental observations. The minor discrepancies observed were primarily attributed to the idealized conditions in the simulation. The results demonstrate that in the 3DR model, crystal orientations predominantly rotate around the transverse direction (TD), with non-TD rotations playing a secondary role. In contrast, the 3DRC model exhibits similar rotation patterns to 3DR at lower reductions, but at higher reductions, non-TD rotations become comparable to TD rotations. This difference results in more concentrated orientations in 3DR and more dispersed orientations in 3DRC. Additionally, analysis reveals that external constraints cause deformation behavior to deviate from the plane strain condition rather than move closer to it. The presence of external constraints alters stress and strain states, modifying the activation of slip systems and crystal rotations, leading to significant variations in slip activity, shear strain, and crystal rotation along TD.