Novel, fully biobased shape memory thermoplastic vulcanizates (TPVs) were prepared using two sustainable biopolymers, poly(lactic acid) (PLA), and modified natural Eucommia ulmoides gum (EUG-g-GMA), via a dynamic vulcanization technique. Simultaneously, in situ compatibilization was achieved in the TPVs to improve interfacial adhesion and the crosslinked modified Eucommia ulmoides gum (EUG) was in “netlike” continuous state in the PLA matrix to form “sea-sea” phase structure. The promoted interface and co-continuous structure played critical roles in enhancing shape memory capacity and toughness of the TPVs. The TPV with 40 wt % modified EUG displayed the highest toughness with an impact strength of 54.8 kJ/m2 and the most excellent shape memory performances with a shape fixity ratio (Rf) of 99.83% and a shape recovery ratio (Rr) of 93.74%. The prepared shape memory TPVs would open up great potential applications in biobased shape memory materials for smart medical devices.
Current high-efficiency hybrid perovskite solar cells (PSCs) have been fabricated with doped hole transfer material (HTM), which has shown short-term stability. Doping applied in HTMs for PSCs can enhance the hole mobility and PSCs' power conversion efficiency, while the stability of PSCs will be significantly decreased due to inherent hygroscopic properties and chemical incompatibility. Development of dopant-free HTM with high hole mobility is a challenge and of utmost importance. In this review, a series of selected and typical π-conjugated dopant-free hole transport materials, mainly regarding small molecules, are reviewed, which could consequently help to further design high-performance dopant-free HTMs. In addition, an outline of the molecular design concept and also the perspective of ideal dopant-free HTMs were explored.
The development of a sacrificial bond provided unique inspiration for the design of advanced elastomers with excellent mechanical properties, but it is still a huge challenge to construct a homogenous polar sacrificial network in a nonpolar elastomer. In this effort, we proposed a novel strategy to engineer a multi-ionic network into a covalently cross-linked 1,2-polybutadiene (1,2-PB) facilitated by in-situ intercalated organic montmorillonite (OMMT) without phase separation. XRD, SEM, and TEM analysis were carried out to characterize the microstructure of the resulting polymers. Crosslinking density, dielectric performance, and cyclic tensile tests were used to demonstrate the interaction of zinc methacrylate (ZDMA) and OMMT. The dynamic nature of ionic bonds allowed it to rupture and reform to dissipate energy efficiently. Stretching orientation brought parallelism between polymer chains and OMMT layers which was beneficial for the reconstruction of the ionic network, ultimately resulting in high strength and a low stress relaxation rate. Overall, our work presented the design of a uniform and strong sacrificial network in the nano-clay/elastomer nanocomposite with outstanding mechanical performances under both static and dynamic conditions.
29 April 2019 in Polymers for Advanced Technologies