Mei Shen

Dr. Mei Shen


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2019 in Polymers
Verified
Journal Article
Open access
PDF file
YWYan Wang
Yan Wang
JLJinhui Liu Jinhui Liu
Jinhui Liu Jinhui Liu
LXLin Xia
Lin Xia
MSMei Shen
Mei Shen
LWLiping Wei
Liping Wei
JKJinkuk Kim
Jinkuk Kim
Novel, fully biobased shape memory thermoplastic vulcanizates (TPVs) were prepared using two sustainable biopolymers, poly(lactic acid) (PLA), and modified natural Eucommia ulmoides gum (EUG-g-GMA), via a dynamic vulcanization technique. Simultaneously, in situ compatibilization was achieved in the TPVs to improve interfacial adhesion and the crosslinked modified Eucommia ulmoides gum (EUG) was in “netlike” continuous state in the PLA matrix to form “sea-sea” phase structure. The promoted interface and co-continuous structure played critical roles in enhancing shape memory capacity and toughness of the TPVs. The TPV with 40 wt % modified EUG displayed the highest toughness with an impact strength of 54.8 kJ/m2 and the most excellent shape memory performances with a shape fixity ratio (Rf) of 99.83% and a shape recovery ratio (Rr) of 93.74%. The prepared shape memory TPVs would open up great potential applications in biobased shape memory materials for smart medical devices.

17 February 2023 in Polymers
Verified
Journal Article
Open access
PDF file
XMXiangze Meng
Xiangze Meng
LKLe Kang
Le Kang
XGXin Guo
Xin Guo
XTXiaohao Tang
Xiaohao Tang
LLLi Liu
Li Liu
MSMei Shen
Mei Shen
As a skeleton material, polyester (PET) fiber can significantly improve the strength and durability of rubber composites, but the interfacial adhesion between polyester fiber and rubber is poor due to the chemical inertia of PET fiber surface. Resorcinol-formaldehyde-latex (RFL) impregnating solution is usually used to treat PET fibers, but RFL contains toxic components such as resorcinol, which is harmful to the human body. A simple and less toxic resin-impregnating system cresol-formaldehyde-latex (CFL) was obtained by alternating resorcinol with low-toxicity cresol and m-cresol formaldehyde resin was synthesized from m-cresol and formaldehyde. CFL (m-cresol formaldehyde resin latex) systems with different C/F mole ratios and CF resin/latex ratios were adopted to modify the surface of PET fibers. The strip peeling adhesive and the H pull-out test results indicated that the PET fiber/rubber adhesion strength increased with the increase in the formaldehyde dosage and the CF resin content, and the peeling force value and the H-pull-out force of treated PET/rubber composites reached 7.3 N/piece and 56.8 N, respectively. The optimal choice of CFL adhesive system was obtained, when the C/F mole ratio was 1/2 and the CF resin/latex weight ratio was 0.23. This environment-friendly CFL dipping emulsion can be used as a new surface modification strategy as it can remarkably enhance the interfacial adhesion of PET/rubber composites.

27 January 2026 in Polymers
Verified
Journal Article
Open access
PDF file
AWAolian Wu
Aolian Wu
YLYanlin Liu
Yanlin Liu
TSTong Sun
Tong Sun
MSMei Shen
Mei Shen
Fiber-reinforced rubber composites (FRRC) are widely employed in critical industries, such as the automotive, aerospace, and construction protection industries, due to their excellent deformation resistance and superior mechanical properties. Polyester (PET) fiber, with its outstanding dimensional stability and cost-effectiveness, has increasingly replaced nylon as the primary reinforcement in radial tires. However, the lack of polar groups on PET surfaces results in poor interfacial adhesion with rubber matrices, limiting composite performance. Traditional resorcinol–formaldehyde–latex (RFL) dipping systems enhance adhesion but raise environmental and health concerns due to the release of hazardous substances. This study develops a novel eco-friendly γ-Aminopropyltriethoxysilane (KH550)–glycerol triglycidyl ether–sorbitol glycidyl ether–2-Ethyl-4-methylimidazole–latex (KG-SML) dipping system to enhance PET–rubber interfacial adhesion. At an optimal KH550 dosage of 2 phr, the 180° peel force and H pull-out force reached maximum values of 23.5 N/piece and 109.0 N, respectively, significantly surpassing the performance of the conventional RFL system. The KG-SML system offers an effective and sustainable alternative to RFL, with enhanced interfacial performance and less environmental impact.