This study investigates the optimization of production parameters for rice husk-derived activated carbon, aiming for its effective application in direct air capture (DAC) technology. Various chemical activation agents (potassium hydroxide [KOH], urea, and their combination) and activation temperatures (600°C, 700°C, and 800°C) were explored using pyrolysis. The resulting activated carbon's morphology was analyzed via scanning electron microscopy (SEM) and ImageJ. Results demonstrate that both activation agent choice and temperature significantly influence pore diameter size and quantity. Increased temperatures led to smaller pore diameters and higher pore quantities. The combination of KOH and urea at 800°C produced the most favorable particle size (0.811 μm), suitable for applications requiring a well-defined pore structure. This combination also exhibited the most even pore distribution and highest pore density. These findings provide valuable insights for optimizing the production of rice husk-derived activated carbon, aiding in the development of sustainable and effective sorbents for CO₂ capture in DAC technology. Additionally, they offer potential for broader applications of husk-activated carbon in various industrial and environmental fields.
1 February 2021 in IOP Conference Series: Materials Science and Engineering
The present work deals with the investigation of thermal decomposition of densified coco peat briquettes using the thermogravimetry method to elucidate the effect of finite size of the biomass briquette on the decomposition profile. The cylindrical samples are varied in term of its density and its shape (sphericity). The sample is heated in a nitrogen atmosphere at different heating rates, ranging from 5°C/min to 20°C/min. The TG curves show three distinct phases of decomposition, i.e. preheating and drying, devolatilization, and char reduction. For all samples, thermal decomposition shifts to higher temperatures with the increase in the heating rate. From the TG curves, it is shown that the initial degradation temperature varies from 181°C to 302°C and the final degradation temperature varies from 328°C to 608°C. The shift to higher temperatures is also observed for the less dense briquettes. The shape of the briquettes affects also the decomposition profile. The less spherical (less of contact area) sample will decompose at higher temperatures. From the DTG curves, it can be seen that the maximum thermal degradation rate takes place at varying temperature ranging from 243°C to 419°C. The peak temperatures depend on the heating rate. However, the density and the shape of the biomass have no appreciable effect on the peak temperature.
1 September 2025 in Journal of Physics: Conference Series
Coco peat, a by-product of coir fibre extraction from coconut husks, possesses potential for diverse applications. To facilitate its handling during storage and transportation, coco peats are commonly prepared in the form of densified products. The current work is dealt with the investigation of the mechanical properties of coco peat briquettes produced by simultaneous dewatering and briquetting through mechanical thermal expression methods. The effect of four factors, namely pressure (10, 13, 15 metric tons), temperature (30°C, 60°C, 120°C), holding time (5, 10, 15 min.), and diameter of 5-cm-height briquettes (4 and 6 cm) on water expulsion, compressive strength, and drop strength responses were investigated. The experimental design adopted the Taguchi’s Octagonal Array. The temperature has the largest effect on the water expulsion, while the pressure has the largest effect on the mechanical properties of the briquettes. Considering mechanical strength, the MTE method is likely unsuitable for producing highly durable briquettes from very wet feedstock, particularly under the factors and levels selected in this study.
Lowering Covid-19 cases globally and nationally provides a positive indication of economic growth, especially in Batam City, Indonesia. This condition is also f Lowering Covid-19 cases globally and nationally provides a positive indication of economic growth, especially in Batam City, Indonesia. This condition is also f
30 December 2024 in Jurnal Inovasi Rekayasa Mekanikal dan Termal
Coir pith was considered a waste from coconut husk fibers extraction. Coir pith has diverse applivcation, perticularly in horticulture. Containing relatively high moisture content, coir pith requires drying for handling and transportation. The current research investigates empirically the drying characteristics of coir pith in a fluidized bed dryer. The fluidization column was 230 cm high and 15 cm in diameter. The experiment includes two different bed heights, i.e 10 cm and 15 cm, and three different drying temperatures, i.e. 57oC, 76oC, and 97oC. The experiment results showed that moisture profile with respect to time varies with the drying temperature, particularly for the low bed heights. While for the higher bed heights, the profiles were similar excempting at the end period of drying. The constant-rate period has been observed at moisture content up to 20% at low and intermediate temperatures and up to 10% at high drying temperature.
The concentration of carbon dioxide (CO2) gas in the atmosphere continues to increase every year, mainly due to human activities such as burning fossil fuels for energy, industrial processes, and transportation. The development of CO2 gas reduction research continues to be carried out, one of which is the adsorption process using adsorbents. The research was carried out by looking at the effect of variations in activating agent and activation temperature on adsorbents as CO2 adsorbers and how N2 and pore size distribution influence CO2 adsorption. The active carbon adsorbent used comes from jengkol peel which is carbonized via the pyrolysis method. Adsorbents are made by varying the type of activating material (KOH, Urea, and KOH+urea) and activation temperature (600℃, 700℃, and 800℃). The active ingredient KOH+urea has better absorption capacity than other variations, but not too high. N2 gas does not really affect the CO2 adsorption process because it has a low N2 adsorption isotherm, so it is not worrying if the CO2 adsorption process also contains N2 in the air. Based on measurements with Belsorp-Max II, the data obtained is only specific surface area data, this is due to the small surface pores of the adsorbent. The temperature of 800℃ has a better specific surface area than other variations, this is also by the higher CO2 adsorption capacity. So it is concluded that the pore surface area influences the ability to absorb CO2. Based on the data obtained, jengkol peel charcoal is not suitable as a CO2 adsorbent because it has a low pore surface area and adsorption isotherm