CO2 capture from air is crucial in achieving negative emissions. Based on conventional or newly developed high-enriching processes, we investigated the rough enrichment of CO2 from air via an externally heated or cooled adsorber (temperature-swing adsorption, TSA), along with air purge using double-pipe heat exchangers packed with low-volatility polyamine-loaded silica. A simple adsorption–desorption cycle was attempted in a TSA experiment, by varying the temperature from 20 °C to 60 °C using moist air, yielding an average CO2 concentration of product gas that was ~17 times higher than the feed air, but the CO2 recovery rate was poor. A double-step adsorption process was applied to increase CO2 adsorption and recovery simultaneously. In this process, substantial-CO2-concentration gas was used as the product gas, and the remaining gas was used as the reflux feed gas for adsorber. This method can provide a product gas with ~100 times higher CO2 concentration than raw gas, with a recovery ratio ~60% under the shortest adsorption/desorption time and the longest refluxing time of cycle operation. Therefore, the refluxing step significantly helped to enhance CO2 capture via adsorption from elevated-CO2-concentration recirculating gas. With this CO2 concentration, the product gas can serve as the CO2 supplement for the growing plant processes.
This study investigates the optimization of production parameters for rice husk-derived activated carbon, aiming for its effective application in direct air capture (DAC) technology. Various chemical activation agents (potassium hydroxide [KOH], urea, and their combination) and activation temperatures (600°C, 700°C, and 800°C) were explored using pyrolysis. The resulting activated carbon's morphology was analyzed via scanning electron microscopy (SEM) and ImageJ. Results demonstrate that both activation agent choice and temperature significantly influence pore diameter size and quantity. Increased temperatures led to smaller pore diameters and higher pore quantities. The combination of KOH and urea at 800°C produced the most favorable particle size (0.811 μm), suitable for applications requiring a well-defined pore structure. This combination also exhibited the most even pore distribution and highest pore density. These findings provide valuable insights for optimizing the production of rice husk-derived activated carbon, aiding in the development of sustainable and effective sorbents for CO₂ capture in DAC technology. Additionally, they offer potential for broader applications of husk-activated carbon in various industrial and environmental fields.
The magnetization directions of self assembly of monodispersed magnetic nanocrystallites with different shapes have been revealed by a direct probe. The orientations of monodispersed maghemite nanocrystallites with spherical and cubic shapes, which are prepared through a drying process, are studied by means of magnetic Compton scattering. By utilizing this technique, a direct measurement of nanocrystallite orientation is possible, and we find that the shape of magnetic Compton profiles is different between spherical and cubic nanocrystallites. The preferential orientation of the spherical nanocrystallites is the [100] direction along the applied magnetic field, while for the cubic ones it is a mix of the [100], [110], and [111] directions. This result indicates that the shape of nanocrystallites is one of the important intrinsic factors that controls the assembly of nanocrystallites under a magnetic field.