Oils and fats are important raw materials in food products, animal feed, cosmetics, and pharmaceuticals among others. The market today is dominated by oils derive, d from African palm, soybean, oilseed and animal fats. Colombia’s Amazon region has endemic palms such as Euterpe precatoria (açai), Oenocarpus bataua (patawa), and Mauritia flexuosa (buriti) which grow in abundance and produce a large amount of ethereal extract. However, as these oils have never been used for any economic purpose, little is known about their chemical composition or their potential as natural ingredients for the cosmetics or food industries. In order to fill this gap, we decided to characterize the lipids present in the fruits of these palms. We began by extracting the oils using mechanical and solvent-based approaches. The oils were evaluated by quantifying the quality indices and their lipidomic profiles. The main components of these profiles were triglycerides, followed by diglycerides, fatty acids, acylcarnitine, ceramides, ergosterol, lysophosphatidylcholine, phosphatidyl ethanolamine, and sphingolipids. The results suggest that solvent extraction helped increase the diglyceride concentration in the three analyzed fruits. Unsaturated lipids were predominant in all three fruits and triolein was the most abundant compound. Characterization of the oils provides important insights into the way they might behave as potential ingredients of a range of products. The sustainable use of these oils may have considerable economic potential.

The Colombian Amazon is a megadiverse region with high potential for commercial use in the pharmaceutical, food, and cosmetic industries, constantly expanding and looking for new alternatives from natural resources; unfortunately, few characterization reports of its profitable non-timber species in Colombia have been conducted. This work aimed to perform a comprehensive analysis of traditionally used species: Carapa guianensis (Andiroba), Euterpe precatoria (Asai), Mauritia flexuosa (Miriti), Astrocaryum murumuru (Murumuru), Plukenetia volubilis (Sacha Inchi), and Caryodendron orinocense H.Karst (Cacay). For this purpose, oil and fat quality indices, phytosterol, carotenoid, tocopherol, and tocotrienol content, as well as density and refractive index, were measured to establish their quality level. Multivariate analysis showed four groups of samples; such differences were mainly due to the composition rather than quality indices and physical properties, especially the content of saturated and unsaturated fatty acids. All species reported a precise composition, which makes them noninterchangeable, and Miriti oil arose as the most versatile ingredient for the industry. The Colombian Amazon region is a promising source of quality raw material, especially for oils/fats and unsaturated fatty acids; this resulted in the most interest for pharmaceutical, food, and cosmetic purposes.

Six different experiments were conducted to give some practical recommendation to apply 1-MCP during the postharvest handling chain of arazá fruit (Eugenia stipitata McVaugh). Fruit were harvested in three stages of maturity (mature-green primarily, turning and mature) and treated for 1 to 12 h with 0 (control in air) or 1 μL L⁻¹ 1-Methylcyclopropene (1-MCP) at 20 °C. The mature-green fruit were subjected to different storage conditions (7, 10, 12, 13, 20 or 27 °C). The treatment of mature-green fruit with 1-MCP for 1 h, and storage at 12 °C for up to 2 weeks prolonged the shelf-life about one week by delaying or reducing the respiration and ethylene production rates, skin colour changes, the loss of organic acids, and softening, with or without a further shelf-life period of 3 days at 20 °C. At 7 °C, 1-MCP also reduced mature-green fruit weight loss and shrivelling. Extending 1-MCP treatment periods at 20 °C to 6 or 12 h caused partial and uneven ripeness. Treating fruit in their post-climacteric stage of maturity had little effect on ripening compared with the mature-green stage. 1-MCP increased the respiration rate and/or the ethylene production in certain combinations of advanced harvest maturities and/or unfavourable storage temperatures. Recommendations for maintaining postharvest quality are harvesting at the mature-green stage, treatment with 1 μL L⁻¹ of 1-MCP for 1 h, and storage at 12 °C for up to 2 weeks.

Organogels have importance for topical applications because they can be used to deliver drugs in a controlled and prolonged fashion. These are materials consisting of a three-dimensional network of organic molecules dispersed in a solvent. Recent studies have demonstrated that the solvent could be replaced by oils from non-conventional biologic sources. There is a diversity of not-explored species in the Amazon that are promising sources of vegetable oils with a promising composition. This study developed an organogel with buriti (Mauritia flexuosa L.f) and cacay (Caryodendron orinocense Karst.) oils, using cetostearyl alcohol as an organogelator due to its compatibility, stability, security, affordability, and it is readily available. The oils were characterized, and the organogels were synthesized by studying their crystal evolution and oil-binding capacity. The microstructure was evaluated with polarized light microscopy, fractal dimension, FTIR spectroscopy, XRD, and thermal and rheological analyses. It was found that the critical gelation concentration was higher for cacay oil as it possessed a higher amount of polyunsaturated triacylglycerols. The crystals of the buriti organogel had a smaller lamellar shape, a greater surface area, and physical and thermal stability; although, it presented a slower crystal evolution due to the low number of minor compounds and a greater number of saturated triacylglycerols. The polar fraction of the organogelators as well as triacylglycerol and minor polar compounds are important in forming crystallization nuclei. The study showed that Amazonian oils in crystallization processes form microstructures with differentiating physicochemical properties.

The Copoazú is a Theobroma species of Amazonian origin, and its derived products have a high content of lipids valuable for both the cosmetic and food industries. The composition of the butter extracted from its seeds can vary depending on the postharvest process and the diverse extraction techniques employed. In this study, the composition of this butter processed with and without seed fermentation was analyzed using two extraction techniques: expeller pressing and hydraulic pressing. Parameters such as lipid profile, quality indexes, melting point, and the content of phytosterols and glyceric compounds were compared with a highly sought-after commercial raw material assessed through standardized volumetric and spectroscopic methodologies. The results showed that non-fermentation and cold-pressing conditions preserved the properties of the butter. This analysis is the first step in a standardized process for developing high-quality cosmetic ingredients derived from Copoazú butter.