Petr Hýzl

Dr. Petr Hýzl

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DSDusan Stehlik
Dusan Stehlik
PHPetr Hýzl
Petr Hýzl
ODOndřej Dašek
Ondřej Dašek
LMLudek Malis
Ludek Malis
RKRobert Kaderka
Robert Kaderka
MVMichal Varaus
Michal Varaus
In addition to the conventional laboratory tests of input materials and construction mixtures, the technically correct design of pavement structure involves more frequent functional tests of the input materials and mixtures. Our study summarizes findings from a long-term monitoring of pavement on selected road sections with lower traffic intensity. The research involved the comparison of resilient moduli as a design parameter of unbound pavement base layers’ unbound granular materials (UGMs), determined in a laboratory by a test device for a cyclical triaxial test and in situ by impact load test using a falling weight deflectometer (FWD). In particular, the resilient moduli determined in the laboratory by a cyclic triaxial test (Mr,CTT) were compared with the real values of resilient moduli measured by FWD (Mr,FWD). A new, unique, and innovative FWD device was used to determine the Mr,FWD of the UGMs. The innovation lay in the dual-axis deflection measurement—measurement performed not just in the axis parallel to the road, but also in the axis in the transversal direction. It was found that, especially on roads with lower traffic load, such dual-axis (spatial) determination of Mr,FWD moduli was of great importance because it often allowed the identification of local pavement sections with low bearing capacities, especially at the edges, which have a significantly lower value of Mr,FWD.

17 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MVMichal Varaus
Michal Varaus
ODOndřej Dašek
Ondřej Dašek
PHPetr Hýzl
Petr Hýzl
DSDušan Stehlík
Dušan Stehlík
MSMarkus Spiegl
Markus Spiegl
This paper discusses the properties of OMV Starfalt® PmB 45/80 RC bituminous binder developed by the Austrian oil company OMV Downstream GmbH (OMV, Vienna, Austria), intended to be used for the recycling of reclaimed asphalt mixtures (RAP). The binder is characterized by various adjusted properties like higher needle penetration, higher softening point and higher elastic recovery (close to 95–100%), with the aim to compensate for the properties of the aged binder contained in the reclaimed asphalt. Three experimental sections were laid in the Czech Republic. Monitoring was performed on these sections (cores were taken after 0, 6, 12, 24, 44 and 93 months) with a consecutive analysis of the properties of the used binder—the binder was extracted from the cores and tested for penetration, softening point, critical temperature at bending beam rheometer (BBR), complex modulus and phase angle using a dynamic shear rheometer (DSR). The previously described binder was used during the construction of trial sections in the villages Domasov and Lednice and near the city Opava. In the first case, a surface course mixture of asphalt concrete type (AC surf 11+) contained 18% of RAP, whereas in the second and third case, a binder course mixture of asphalt concrete type (AC bin 22 S) comprised 23% and 39% of RAP, respectively. After approx. 8 years (Domasov and Lednice) and 3.5 years (Opava) in service, no failures or defects were recorded at any of the sections. This paper gives an update of the research work carried out in 2019 with the latest results from 2023.