Hadjer Didouh

Ms. Hadjer Didouh

process engineering, University Hassiba Benbouali of Chlef, Chlef, Algeria
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2023 in Journal of Molecular Liquids
Verified
Journal Article
Closed access
HDHadjer Didouh
Hadjer Didouh
ABAysel Buyuksagis
Aysel Buyuksagis
MMMohammed Hadj Meliani
Mohammed Hadj Meliani
MDMeltem Dilek
Meltem Dilek
YKYusuf Kayali
Yusuf Kayali
TSTawfik A. Saleh
Tawfik A. Saleh

20 October 2024 in Bioengineering
Verified
Journal Article
Open access
PDF file
HDHadjer Didouh
Hadjer Didouh
HKHifsa Khurshid
Hifsa Khurshid
MMmohammed hadj meliani
mohammed hadj meliani
Rami Khalid SuleimanRami Khalid Suleiman
Rami Khalid Suleiman
Saviour A. UmorenSaviour A. Umoren
Saviour A. Umoren
IBIzzeddine SAMEUT BOUHAIK
Izzeddine SAMEUT BOUHAIK
Microbially influenced corrosion represents a critical challenge to the integrity and durability of carbon steel infrastructure, particularly in environments conducive to biofilm formation by nitrate-reducing bacteria (NRB). This study investigated the impact of NRB biofilms on biocorrosion processes within oil/water recovery operations in Algerian pipelines. A comprehensive suite of experimental and analytical techniques, including microbial analysis, gravimetric methods, and surface characterization, were employed to elucidate the mechanisms of microbially influenced corrosion (MIC). Weight loss measurements revealed that carbon steel samples exposed to injection water exhibited a corrosion rate of 0.0125 mm/year, significantly higher than the 0.0042 mm/year observed in crude oil environments. The microbial analysis demonstrated that injection water harbored an average of (4.4 ± 0.56) × 106 cells/cm2 for sessile cells and (3.1 ± 0.25) × 105 CFU/mL for planktonic cells, in stark contrast to crude oil, which contained only (2.4 ± 0.34) × 103 cells/cm2 for sessile cells and (4.5 ± 0.12) × 102 CFU/mL for planktonic cells, thereby highlighting the predominant role of injection water in facilitating biofilm formation. Contact angle measurements of injection water on carbon showed 45° ± 2°, compared to 85° ± 4° for crude oil, suggesting an increased hydrophilicity associated with enhanced biofilm adhesion. Scanning electron microscopy further confirmed the presence of thick biofilm clusters and corrosion pits on carbon steel exposed to injection water, while minimal biofilm and corrosion were observed in the crude oil samples.

6 January 2025 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
HDHadjer Didouh
Hadjer Didouh
AKAdnan Khan
Adnan Khan
LXLingjun Xu
Lingjun Xu
MMMohammed Hadj Meliani
Mohammed Hadj Meliani
Rami Khalid SuleimanRami Khalid Suleiman
Rami Khalid Suleiman
IBIzzadine Sameut Bouhaik
Izzadine Sameut Bouhaik

10 December 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
HDHadjer Didouh
Hadjer Didouh
FAFadi Al-Badour
Fadi Al-Badour
FKFaiza Khoukhi
Faiza Khoukhi
OBOmar BOULEDROUA
Omar BOULEDROUA
MRMohammad Mizanur Rahman
Mohammad Mizanur Rahman
MMmohammed hadj meliani
mohammed hadj meliani
Microbially influenced corrosion poses a significant threat to the integrity and longevity of carbon steel infrastructure, particularly in environments conducive to biofilm formation by thiosulfate-reducing bacteria (TRB) to carbon steel. This study explores the potential of Portulaca oleracea, an edible plant species, as a dual-action biocide and green corrosion inhibitor for mitigating MIC adhesion. Through a comprehensive suite of experimental and analytical techniques, including electrochemical analysis, microbial analysis, gravimetric methods, and surface characterization, the efficacy of Portulaca oleracea extract is evaluated for its ability to inhibit TRB growth and biofilm formation while concurrently providing corrosion protection to carbon steel substrates. The electrochemical analyses reveal the extract’s capacity with the anodic reaction inhibition achieving 80%, thereby reducing the overall corrosion rate of carbon steel in the presence of TRB biofilms. Complementary microbial analyses, such as viable cell counting using test kits, elucidate the biocidal action of the extract, effectively suppressing TRB growth and biofilm development, with the presence of 20 ppm of the extract reducing bacterial growth. Surface characterization techniques provide insights into the adsorption behavior of the extract’s constituents on the carbon steel surface, forming a protective film that mitigates corrosion and biofilm adhesion. The adsorption of the extract at the interface between mild steel and the formation water adheres to Langmuir isotherm. Overall, the biocorrosion issue we are addressing in this work is crucial for ensuring the sustainability and efficiency of equipment, pipelines, and other metal-based systems.

12 June 2025 in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
Verified
Journal Article
Closed access
HDHadjer Didouh
Hadjer Didouh
MMMohammed Hadj Meliani
Mohammed Hadj Meliani
RSRami K. Suleiman
Rami K. Suleiman
OBOmar Bouledroua
Omar Bouledroua
This study explores the orientation-dependent behaviour of microbially influenced corrosion (MIC) in carbon steel pipelines exposed to injection water environments. API 5L X52 carbon steel coupons were positioned at 6, 9, and 12 o’clock orientations to simulate operational conditions and analyzed using electrochemical impedance spectroscopy (EIS), gravimetric analysis, scanning electron microscopy and energy-dispersive X-ray spectroscopy, and sessile cell quantification. The 6 o’clock orientation exhibited the most severe corrosion, with a maximum rate of 0.54 mm/year, correlating with the highest sessile cell density ((1.5 ± 0.3) × 10 7 cells/cm²), extensive biofilm colonisation, and significant weight loss. Intermediate degradation occurred at 9 o’clock (0.26 mm/year), while the 12 o’clock orientation showed the lowest MIC activity (0.15 mm/year). Gravimetric and EIS results demonstrated strong agreement, with lower charge transfer resistance (Rct) values aligning with higher mass loss. SEM and EDS analyses confirmed the presence of mature biofilms and corrosion products including iron oxides and sulphides. These findings emphasise the critical influence of gravity-induced sedimentation, nutrient accumulation, and reduced shear forces in enhancing MIC at the 6 o’clock position.

16 January 2025 in International Journal of Structural Integrity
Verified
Journal Article
Closed access
AMAmara Mouna
Amara Mouna
FKFatima Zahra Khedim
Fatima Zahra Khedim
HDHadjer Didouh
Hadjer Didouh
HTHayet Tati
Hayet Tati
LSLamsadfa Sidamar
Lamsadfa Sidamar
Rami Khalid SuleimanRami Khalid Suleiman
Rami Khalid Suleiman
Purpose: It is now well-known in the fracture-mechanics community that a single fracture parameter alone may not be adequate to describe crack-tip condition. To address this problem, there has been a recent surge of interest in crack-growth behaviour under conditions of low crack-tip stress triaxiality. This paper exploited the K-A3 crack approach, which was derived from a rigorous asymptotic solution and has been developed for a two-parameter fracture.Design/methodology/approach: The material failure curve or master curve, has been established as a result of the notched specimen tests. It was shown that the notch fracture toughness is a linear decreasing function of the stress. The use of the material failure curve to predict fracture conditions was demonstrated on gas pipes with the longitudinal surface notch.Findings: No finding.Originality/value: This approach requires that the constraint in the test specimen approximate that of the structure to provide an “effective” toughness for use in a structural integrity assessment. The appropriate constraint is achieved by matching thickness and crack depth between the specimen and structure.