Microbially influenced corrosion poses a significant threat to the integrity and longevity of carbon steel infrastructure, particularly in environments conducive to biofilm formation by thiosulfate-reducing bacteria (TRB) to carbon steel. This study explores the potential of Portulaca oleracea, an edible plant species, as a dual-action biocide and green corrosion inhibitor for mitigating MIC adhesion. Through a comprehensive suite of experimental and analytical techniques, including electrochemical analysis, microbial analysis, gravimetric methods, and surface characterization, the efficacy of Portulaca oleracea extract is evaluated for its ability to inhibit TRB growth and biofilm formation while concurrently providing corrosion protection to carbon steel substrates. The electrochemical analyses reveal the extract’s capacity with the anodic reaction inhibition achieving 80%, thereby reducing the overall corrosion rate of carbon steel in the presence of TRB biofilms. Complementary microbial analyses, such as viable cell counting using test kits, elucidate the biocidal action of the extract, effectively suppressing TRB growth and biofilm development, with the presence of 20 ppm of the extract reducing bacterial growth. Surface characterization techniques provide insights into the adsorption behavior of the extract’s constituents on the carbon steel surface, forming a protective film that mitigates corrosion and biofilm adhesion. The adsorption of the extract at the interface between mild steel and the formation water adheres to Langmuir isotherm. Overall, the biocorrosion issue we are addressing in this work is crucial for ensuring the sustainability and efficiency of equipment, pipelines, and other metal-based systems.
Carbon dioxide emissions due to fossil fuels cause environmental problems, global warming and climatic change, hence the need to replace them with renewable energy sources is necessary and among the solutions is the use of hydrogen. The difficulty in using hydrogen does not lie in its production but rather in securing its transport by canalization and storage in tanks because a simple leak will cause an explosion. At the present time, both industrials and researchers are trying to replace conventional pipes made of very heavy metallic steel, which have corrosion problems and costly maintenance, by pipes made of very light composites, having a long life time and low maintenance due to the fact that they are nonmetallic (i.e. do not have corrosion problems). The use of composite pipes contributes to the reduction of their cost prices and installation costs. In this perspective, the present study focuses on the design and manufacturing, by the filament winding technique, of composite tubes having the same type of twisted natural fiber but two types of polyester resins, supplied by two different manufacturers, have been used. Test specimens were cut from the elaborated composite tubes in their longitudinal direction according to the ASTM D790-17 standard and then tested in 3-point bending with a speed of 5 mm/min using a Walter & Bai tensile machine. It is important to note that the specimens were both on their concave faces and on the convex one. The obtained stress/displacement response curves allowed to determine the mechanical properties, namely the stress, the Young's modulus and the displacement at break. In addition, for both types of polyester resin, the resistances of the specimens tested on their external faces were higher than those tested on their internal ones.