The conventional Wien filter is a device with orthogonal static magnetic and electric fields, often used for velocity separation of charged particles. Here we describe the electromagnetic design calculations for a novel waveguide RF Wien filter that will be employed to solely manipulate the spins of protons or deuterons at frequencies of about 0.1 to 2 MHz at the COoler SYnchrotron COSY at J\"ulich. The device will be used in a future experiment that aims at measuring the proton and deuteron electric dipole moments, which are expected to be very small. Their determination, however, would have a huge impact on our understanding of the universe.Comment: 10 pages, 10 figures, 4 table
The utilization of oxygen transport membranes enables the production of high-purity hydrogen by the thermal decomposition of water below 1000 °C. This process is based on a chemical potential gradient across the membrane, which is usually achieved by introducing a reducing gas. Computational fluid dynamics (CFD) can be used to model reactors based on this concept. In this study, a modelling approach for water splitting is presented in which oxygen transport through the membrane acts as the rate-determining process for the overall reaction. This transport step is implemented in the CFD simulation. Both gas compartments are modelled in the simulations. Hydrogen and methane are used as reducing gases. The model is validated using experimental data from the literature and compared with a simplified perfect mixing modelling approach. Although the main focus of this work is to propose an approach to implement the water splitting in CFD simulations, a simulation study was conducted to exemplify how CFD modelling can be utilized in design optimization. Simplified 2-dimensional and rotational symmetric reactor geometries were compared. This study shows that a parallel overflow of the membrane in an elongated reactor is advantageous, as this reduces the back diffusion of the reaction products, which increases the mean driving force for oxygen transport through the membrane.
1 July 2017 in IOP Conference Series: Materials Science and Engineering
Electromagnetic stirring in a copper slag cleaning process aims at improving the recovery efficiency of the finely dispersed metallic materials from the waste. In the present study the multiphase problems involved in the slag cleaning process are numerically investigated. An Euler-Lagrange approach with advanced collision and coalescence modelling is employed. The corresponding methodologies are briefly introduced and discussed. Based on the implemented sub-models, the copper recovery is numerically investigated for operating parameters corresponding to industrial pilot plants.
5 October 2022 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment