CRTS III (China Railway Track System) slab track is a typical multi-layer composite structure. Door-shaped rebar is an important connecting component. Studying its service characteristics is crucial for disease prevention and control. To investigate the mechanical properties of door-shaped rebar under multi-factor coupling, a three-dimensional finite element model was developed and validated with full-scale tests. Then, considering the initial defects of self-compacting concrete (SCC), interlayer cracks and other damages, the mechanical properties of door-shaped rebar of a CRTS III slab track under temperature load were studied. The results show that under the action of an extreme temperature gradient, the maximum vertical displacement of the track slab occurs in the middle and corner positions of the slab with the positive temperature gradient, with displacement values of 0.87 mm and -0.99 mm respectively. Under positive and negative temperature gradients, the stress of the door-shaped rebar at the interface between the track slab and the SCC layer is 12.9 MPa and 16.5 MPa, respectively. When considering the conditions of the SCC slurry layer, the stress of the door-shaped rebar in the SCC layer under the action of a temperature gradient is generally in an increasing state. When there is a crack at the interface of the SCC layer, the stress of the door-shaped rebar unit in the crack area changes significantly, and the crack at the edge of track slab has the greatest impact on the stress of the door-shaped rebar under the positive temperature gradient, which is 157.9 MPa. The research results provide a theoretical basis for disease control.
28 February 2025 in Soil Dynamics and Earthquake Engineering
In this work, the deformation behavior of a long-span steel–concrete composite girder cable-stayed bridge under temperature loads and its subsequent impact on ballastless track systems were investigated. An integrated finite element model (FEM) of the bridge–track system was developed by taking the Taiziping Wujiang River Bridge (with a main span of 300 m) in Chongqing, China, as a case study. The model incorporates composite girders, pylons, stay cables, rails, and double-block slab tracks. Then, the integrated FEM systematically analyzed structural responses to various temperature loading scenario, namely uniform temperature change, differential temperatures among key components (girder, deck, pylons, and cables), and deck–girder temperature difference. The results show that the girder’s maximum vertical displacement linearly correlates with the temperature variations of the composite girder, upper pylon, and cables, with corresponding temperature sensitivity coefficients of 2.3 mm/°C, 2.78 mm/°C, and −5.8 mm/°C. While the ballastless track coordinates well with the composite girder in vertical deformation, the maximum longitudinal relative displacement occurs between rail and track at the ends of the bridge. Moreover, field monitoring data were used to establish a high-precision relationship between ambient temperature and structural temperatures of key components, enabling successful prediction of girder’s vertical deformation. The findings provide a theoretical basis for the control of thermal deformation during the operation and maintenance of similar long-span composite girder cable-stayed bridges.
The wheel–rail impact effect is prominent in the low vibration track (LVT) in the curved sections of heavy-haul railways, where fastener failure and the support block hanging void are prone to occurring. To investigate the impact of these issues on the dynamic characteristics of the vehicle–track coupled system, this study establishes a coupled dynamics model of a heavy-haul train and LVT, taking into account the topological relationships of vehicle components, multipoint wheel–rail contact, and track irregularities. Comparative analyses are conducted to evaluate the effects of the location, quantity, and failure degree of fastener failure and support block hanging voids on running safety and stability. The results show that (1) compared to the normal condition, fastener failure and support block hanging voids lead to varying degrees of increases in response indicators, thereby intensifying the wheel–rail impact; (2) bilateral failure exhibits more pronounced dynamic responses than unilateral failure, and when the number of failed fasteners or hanging voids exceeds one, the maximum wheel load reduction rate increases significantly; (3) as the gap of the hanging void increases, the dynamic response also increases, and when the gap reaches approximately 3 mm, the support block can be considered fully suspended; and (4) comprehensive analysis indicates that fastener failure poses a greater threat to running safety than support block hanging voids and thus warrants greater attention in practical engineering applications. This study provides theoretical support for the maintenance and repair of heavy-haul railways.