CRTS III (China Railway Track System) slab track is a typical multi-layer composite structure. Door-shaped rebar is an important connecting component. Studying its service characteristics is crucial for disease prevention and control. To investigate the mechanical properties of door-shaped rebar under multi-factor coupling, a three-dimensional finite element model was developed and validated with full-scale tests. Then, considering the initial defects of self-compacting concrete (SCC), interlayer cracks and other damages, the mechanical properties of door-shaped rebar of a CRTS III slab track under temperature load were studied. The results show that under the action of an extreme temperature gradient, the maximum vertical displacement of the track slab occurs in the middle and corner positions of the slab with the positive temperature gradient, with displacement values of 0.87 mm and -0.99 mm respectively. Under positive and negative temperature gradients, the stress of the door-shaped rebar at the interface between the track slab and the SCC layer is 12.9 MPa and 16.5 MPa, respectively. When considering the conditions of the SCC slurry layer, the stress of the door-shaped rebar in the SCC layer under the action of a temperature gradient is generally in an increasing state. When there is a crack at the interface of the SCC layer, the stress of the door-shaped rebar unit in the crack area changes significantly, and the crack at the edge of track slab has the greatest impact on the stress of the door-shaped rebar under the positive temperature gradient, which is 157.9 MPa. The research results provide a theoretical basis for disease control.
Embedded tracks provide continuous elastic support and effective vibration mitigation, but failures of the gauge adjustment mechanism are difficult to detect directly and may compromise track safety. To investigate impact-induced vibration transmission and identify such failures, wheel-drop impact tests were conducted on a full-scale embedded track model at different drop heights under intact, single-rod failure, and double-rod failure conditions. Time-frequency responses and frequency-band energy features of the structural layers were analyzed. Impact vibration attenuated progressively from the rail through the polymeric layer, track slab, and base slab to the ground, accompanied by marked frequency redistribution. At a drop height of 20 mm, the overall vibration-level reduction from the rail to the ground reached 38.8 dB. The rail exhibited a broadband response over 0–3000 Hz, whereas energy was concentrated within 200–600 Hz in the polymeric layer, 0–200 Hz in the track slab, and below 100 Hz in the base slab and ground. Failure of the gauge adjustment mechanism shifted the track-slab vibration energy from 50–100 Hz toward 100–500 Hz, with the 4.5 m section showing the highest sensitivity. A failure identification method based on track slab frequency-band energy features achieved 100% classification accuracy on the limited test dataset. Only seven features from the track slab at the 4.5 m section were required, demonstrating a feasible approach for condition assessment and structural health monitoring of embedded tracks.
Semantic segmentation of railway point clouds is complicated by anisotropic sampling, large data volumes, and small components. This study develops an acquisition-aware processing and segmentation framework that combines structure-aware filtering (SCAF), anisotropy-aware normal estimation, and a modified PointNet++ with reduced-input sampling and component-scale multi-scale grouping. Experiments use a railway dataset containing approximately 400 million raw points. All reported experimental means are based on five independent runs, and run-to-run variation remained within 5% of the corresponding configuration-specific mean. The mixed-normal configuration achieves a mean test mIoU of 97.60% and an overall accuracy of 99.12%. Among the external models, Point Transformer v2 achieves the highest reported mIoU and OA, at 99.10% and 99.80%, respectively. SCAF and statistical outlier removal achieve mean test mIoUs of 95.182% and 95.203%, while their denoising times are 43 s and 18,797 s, respectively. The results indicate that acquisition-aware geometric processing improves component-level segmentation within the investigated setting, whereas the external-model comparison provides a stronger architectural reference for future label-independent evaluation. Validation remains limited to the investigated acquisition system and railway scenario, and the measured processing costs do not establish end-to-end real-time inspection.
The wheel–rail impact effect is prominent in the low vibration track (LVT) in the curved sections of heavy-haul railways, where fastener failure and the support block hanging void are prone to occurring. To investigate the impact of these issues on the dynamic characteristics of the vehicle–track coupled system, this study establishes a coupled dynamics model of a heavy-haul train and LVT, taking into account the topological relationships of vehicle components, multipoint wheel–rail contact, and track irregularities. Comparative analyses are conducted to evaluate the effects of the location, quantity, and failure degree of fastener failure and support block hanging voids on running safety and stability. The results show that (1) compared to the normal condition, fastener failure and support block hanging voids lead to varying degrees of increases in response indicators, thereby intensifying the wheel–rail impact; (2) bilateral failure exhibits more pronounced dynamic responses than unilateral failure, and when the number of failed fasteners or hanging voids exceeds one, the maximum wheel load reduction rate increases significantly; (3) as the gap of the hanging void increases, the dynamic response also increases, and when the gap reaches approximately 3 mm, the support block can be considered fully suspended; and (4) comprehensive analysis indicates that fastener failure poses a greater threat to running safety than support block hanging voids and thus warrants greater attention in practical engineering applications. This study provides theoretical support for the maintenance and repair of heavy-haul railways.
Trapezoidal sleepers exhibit better vibration reduction performance compared to ordinary track bed structures. However, the longitudinal vibration transmission law of these sleepers remains unclear, hindering the interpretation of abnormal phenomena and further structural optimization. This paper designs a full-scale model of a trapezoidal sleeper, applies impact loads using a hammer, and collects vibration responses at multiple points to analyze the longitudinal vibration attenuation law of the trapezoidal sleeper. Results show that during longitudinal vibration transmission, the vibration response duration of each structure gradually increases. For the peak and RMS values of vibration acceleration per unit distance, the response reduction amplitude of the track slab and ground is greater than that of the rail, and the corresponding reduction occurs earlier for both. The power spectral density of the trapezoidal sleeper gradually decreases from the center of the slab to the ends, with vibration amplification occurring at the 1/4 position and the ends. Strengthening the end constraints and optimizing the spacing of the vibration damping pads are necessary to achieve uniform vibration attenuation.