Deploying Cellular Internet of Things (CIoT) devices in urban and remote areas faces significant energy efficiency challenges. This is especially true for Narrowband IoT (NB-IoT) devices, which are expected to function on a single charge for up to 10 years while transmitting small amounts of data daily. The 3rd Generation Partnership Project (3GPP) has introduced energy-saving mechanisms in Releases 13 to 16, including Early Data Transmission (EDT) and Preconfigured Uplink Resources (PURs). These mechanisms extend battery life and reduce latency by enabling data transmission without an active Radio Resource Control (RRC) connection or Random Access Procedure (RAP). This paper examines these mechanisms using the LENA-NB simulator in the ns-3 environment, which is a comprehensive framework for studying various aspects of NB-IoT. The LENA-NB has been extended with PURs, and our analysis shows that PURs significantly enhance battery life and latency efficiency, particularly in high-density environments. Compared to the default RAP method, PURs reduce energy consumption by more than 2.5 times and increases battery life by 1.6 times. Additionally, PURs achieve latency reductions of 2.5–3.5 times. The improvements with PURs are most notable for packets up to 125 bytes. Our findings highlight PURs’ potential to enable more efficient and effective CIoT deployments across various scenarios. This study represents a detailed analysis of latency and energy consumption in a simulated environment, advancing the understanding of PURs’ benefits.

Wiring of heliostat fields for solar tower plants is a cost factor that becomes more important as the overall cost target is decreasing. Wireless heliostats with radio communication and autarchic energy supply have therefore been proposed in the past. But none of the communication solutions investigated so far could realistically scale to commercial size plants with tens of thousands of heliostats. Moreover, the digitalization of CSP plants with numerous mobile and stationary sensor systems requires a suitable data communication, too. The new generation of mobile radio communication (5G) is capable of handling the heterogenous communication profile portfolio comprising large numbers of units with low data rates – like heliostats - and few units with very large data volume – like e.g. drone-based camera systems. The communication requirements of a typical solar tower installation are assessed in this work and a data traffic model is created for the most relevant communication channels. The various existing 5G implementations are assessed to find the most suitable solution. Different operator models for 5G are considered and their applicability in CSP target countries is discussed. A simulation test case is presented that models the radio communication traffic of a heliostat field control during a cloud passage. Finally, the experimental 5G campus network is introduced that is currently installed at the Solar Tower Jülich research plant and will be operated in the upcoming months to demonstrate the technical feasibility of 5G radio for communication in solar fields.

Deploying Cellular Internet of Things (CIoT) devices in urban and remote areas faces significant energy efficiency challenges. This is especially true for Narrowband IoT (NB-IoT) devices, which are expected to function on a single charge for up to 10 years while transmitting small amounts of data daily. The 3rd Generation Partnership Project (3GPP) has introduced energy-saving mechanisms in Releases 13 to 16, including Early Data Transmission (EDT) and Preconfigured Uplink Resources (PUR). These mechanisms extend battery life and reduce latency by enabling data transmission without an active Radio Resource Control (RRC) connection or Random Access Procedure (RAP). This paper examines these mechanisms using the LENA-NB simulator in the ns-3 environment, which is a comprehensive framework for studying various aspects of NB-IoT. The LENA-NB has been extended with PUR, and our analysis shows that PUR significantly enhances battery life and latency efficiency, particularly in high-density environments. Compared to the default RAP method, PUR reduces energy consumption by more than 2.5 times and increases battery life by 1.6 times. Additionally, PUR achieves latency reductions of 2.5-3.5 times. The improvements with PUR are most notable for packets up to 125 bytes. Our findings highlight PUR’s potential to enable more efficient and effective CIoT deployments across various scenarios. This study represents a detailed analysis of latency and energy consumption in a simulated environment, advancing the understanding of PUR’s benefits.