The authors developed a growth method for carbon nanotubes (CNTs) by using a resist-assisted patterning process. The CNTs can be grown directly on the patterned catalyst surface without a diffusion barrier. The growth-site patterns were fabricated on a nickel/silicon substrate by a conventional lithography method using a photopatternable resist. The growth mechanism of the CNTs without diffusion barrier was confirmed by Raman spectroscopy and transmission-electron microscope measurement. The carbon-network formation during forming the process is a key parameter for CNT growth. The technique will be applicable to a low-cost fabrication process of electron-emitter arrays.
We evaluated the use of flexible biosensors based on Ni-coordinated, vertically aligned carbon nanotubes on a flexible graphite substrate (Ni/VCNTs/G) for the nonenzymatic electrochemical detection of glucose. The Ni/VCNTs/G electrodes were fabricated by a simple process of radiofrequency sputtering and plasma-enhanced chemical vapour deposition. We performed cyclic voltammetry and chronoamperometry for electrochemical characterization of the Ni/VCNTs/G electrodes. In addition, we examined the effect of mechanical bending on their sensing performance. The electrodes exhibited enhanced electrocatalytic activity toward the oxidation of glucose in alkaline solution compared to the bare graphite, Ni particles, and vertically aligned CNTs on graphite. They also exhibited a sensitivity of 950.6 μA mM−1 cm−2 to glucose with a linear range of 0.05 to 1.0 mM and a detection limit of 30 μM. In particular, there was no significant change in the amperometric signal of the electrodes, showing a sensitivity of 910.7 μA mM−1 cm−2 (only a 4% decrease in the initial response) after the 200th bending. Moreover, the Ni/VCNTs/G electrodes were less sensitive to common interfering species such as ascorbic acid, uric acid, galactose, and xylose than to glucose. To summarize, our Ni/VCNTs/G electrodes exhibited enhanced electrocatalytic activity, good sensitivity, a fast response, high selectivity, and excellent mechanical stability. Therefore, we expect that our flexible, nonenzymatic glucose biosensor based on this electrode will open exciting opportunities for wearable, real-time, and/or on-site applications in fields ranging from clinical analysis to industry.
The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP) process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm2 for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/µm at an anode emission current of 0.1 mA. The author demonstrated the X-ray source with triode electrode structure utilizing the carbon nanotube emitter, and the transmitted X-ray image was of high resolution.
27 March 2008 in Journal of Materials Science: Materials in Electronics
We carried out the in situ analysis of chemical species for the growth of carbon nanotubes (CNTs), deposited by a triode plasma enhanced chemical vapor deposition with a and mixture, using optical emission spectroscopy (OES). A positive mesh bias enhances the radical density, thus increasing the growth rate. The vertically aligned CNTs were grown at a 50% flow rate ratio to and mesh bias voltage of , resulting from the increased CH radical density and the decreased H and CN radical density through the OES analysis.