The carbon nanotube field emitter array was grown on silicon substrate through a resist-assisted patterning (RAP) process. The shape of the carbon nanotube array is elliptical with 2.0 × 0.5 mm2 for an isotropic focal spot size at anode target. The field emission properties with triode electrodes show a gate turn-on field of 3 V/µm at an anode emission current of 0.1 mA. The author demonstrated the X-ray source with triode electrode structure utilizing the carbon nanotube emitter, and the transmitted X-ray image was of high resolution.
We fabricated carbon nanotube (CNT) cold cathode emitters with enhanced and stable electron emission properties and long-time stability with electrical aging as a post-treatment. Our CNT field emitters showed improved electrical properties by electrical aging. We set the applied bias for effective electrical aging, with the bias voltage defined at the voltage where Joule heating appeared. At the initial stage of aging, the electron emission current started to increase and then was saturated within 3 h. We understood that 5 h aging time was enough at proper aging bias. If the aging bias is higher, excessive heating damages CNT emitters. With the electrical aging, we obtained improved electron emission current from 3 mA to 6 mA. The current of 6 mA was steadily driven for 9 h.
We developed a vacuum-sealed X-ray tube with glass envelope using carbon nanotube electron beam (C-beam). The C-beam was fabricated with resist-assisted patterning (RAP)-grown carbon nanotube (CNT) emitters. The CNT emitters grown on silicon wafer were bonded with metal carrier on cathode to reduce outgassing. The C-beam show very stable electron emission current after 600 °C vacuum annealing, with more than 90% of electrons from cathode transmission passing through gate electrode. With the C-beam modules, we fabricated an X-ray tube with vacuum sealing technique and confirmed its performance with imaging of high-resolution printed circuit board. Micron-scale metal lines were well resolved with the tube.
1 November 2016 in Journal of Nanoscience and Nanotechnology