Backscatter communication is a new wireless communication technology, which can enable battery-free devices to communicate with others by backscattering ambient radio-frequency signals, and therefore has great potential to be deployed in future Internet of Things (IoT) networks. In the existing related studies, the adopted centralized approach might be not suitable for a large-scale IoT network with sporadic backscatter communication, while the adopted distributed approach ignored the demand of the AP. In this paper, we consider a large-scale IoT network consisting of the legacy Wi-Fi communication and the backscatter communication, and aim to propose an efficient distributed backscatter medium access control (MAC) protocol that takes into account of the demand of the AP. In our protocol, when the AP has a demand to collect the information of backscatter devices, it enables backscatter devices to contend for the channel with Wi-Fi devices in a separate manner, where the backscatter devices are only allowed to participate in the contention in a limited time period. We then characterize this constrained contention process and develop a theoretical model to analyze the performance of the proposed protocol. With this model, we can exactly express the per-node throughput of Wi-Fi and backscatter devices. Finally, extensive simulations verify that our model is much accurate, and our protocol can outperform the related protocol in terms of both per-node throughput and system throughput.
9 December 2019 in IEEE Transactions on Mobile Computing
Dynamic frequency scaling (DFS) is a state-of-the-art power-saving technique. Various DFS-based WiFi schemes have been proposed for power saving. These schemes demonstrated the power-saving feasibility of DFS via hardware implementation or simulation. This paper is the first that proposes a general theoretical framework to evaluate the performance of these schemes, where we use Queuing theory to analyze the system throughput and use Semi-Markov theory to quantify the power consumption. In addition, we adopt the energy efficiency (i.e., the throughput per energy cost) to compare the gains of these schemes. This efficiency measure can be used to make a trade-off between system throughput and power consumption and therefore help us choose appropriate parameter settings. Extensive simulations verify that our theoretical model is very accurate and our theoretical results well match with universal software radio peripheral (USRP) experiment results. Our study shows that DFS can greatly improve the energy efficiency of WiFi networks even under low SNR conditions; for example, when SNR=9.7dB, the improvement is around 16% for 802.11 ac at rate 1300Mb/s. Our study also shows that DFS can be well integrated with other commonly used power-saving mechanisms to improve the energy efficiency further.
28 December 2020 in Security and Communication Networks
5G customer premise equipment (5G-CPE) is an IoT gateway technology that integrates 5G and Wi-Fi and therefore can provide Wi-Fi connection for IoT devices and meanwhile benefit from the advantages of 5G. With the increasing number of IoT devices, transmission collisions and hidden/exposed terminal problems on the Wi-Fi connection side become more and more serious. Conventional mechanisms cannot solve these problems well. In this paper, we propose a Wi-Fi sector (Wi-FiS) design, which is compatible with Wi-Fi, to solve them fundamentally. Wi-FiS divides the whole coverage area of Wi-Fi into multiple sectors and utilizes beamforming technology and sector-based scheduling to improve system performance of Wi-Fi dense networks. For a single-cell network, Wi-FiS differentiates uplink and downlink operations and totally excludes collision in downlink. For a multicell network, Wi-FiS can avoid hidden and exposed terminal problems, while enabling parallel transmissions among multiple cells. We then develop a theoretical model to analyze Wi-FiS’s throughput. Extensive simulations verify that our theoretical model is very accurate and Wi-FiS can improve system throughput of Wi-Fi dense networks significantly.
30 June 2025 in IEEE Journal on Selected Areas in Communications
The widespread adoption of WiFi has made throughput efficiency a critical concern in wireless networks. While Full-Duplex (FD) technology promises to double network capacity by enabling simultaneous transmission and reception, existing FD-WiFi designs primarily focus on the data transmission phase, leaving the fundamental inefficiencies in channel contention unaddressed. This paper presents CollFree, a novel WiFi protocol that exploits FD capabilities during both contention and data transmission phases. At its core, CollFree introduces a Slotwise Arbitration (SA) mechanism that enables each node to simultaneously transmit contention signals and sense channel status in each contention slot. This dual-mode operation significantly reduces contention time and facilitates collision-free data transmissions through a unique winner-determination process. We then develop theoretical models to analyze CollFree’s contention performance and throughput efficiency under both perfect and imperfect Clear Channel Assessment (CCA) conditions, providing guidelines for parameter optimization in practical deployments. Extensive simulations demonstrate that CollFree enhances throughput efficiency by over 20% compared to state-of-the-art FD-WiFi systems while maintaining distributed control and compatibility with current WiFi standards. These results suggest that CollFree represents a significant step toward realizing the full potential of FD technology in next-generation WiFi networks.
In traditional CSMA/CA-based MAC designs supporting successive interference cancellation (SIC), channel utilization is inefficient, because the inherited CSMA/CA-style contention approach often forces the whole channel to remain idle and the early released channel is not utilized. In this paper, we propose Multi-CQ, which is the first software-defined networking (SDN)-based MAC design for wireless LANs that supports SIC and significantly improves the channel utilization. Multi-CQ, adopting SDN's functional separation idea and OFDMA, makes contention and data transmission be executed over two subchannels independently and concurrently, where the superposition coding are used for decoding combined signals, and multiple CQs (contention queues) are introduced to coordinate the concurrency. This concurrent execution greatly reduces the waste in channel contention. Next, adopting SDN's central control idea, Multi-CQ controller selects nodes who can finish their frame transmissions in almost equal time, thereby improving the channel utilization. Finally, we develop a theoretical model to optimize bandwidth allocation for channel contention and data transmission. Extensive simulations verify the effectiveness of our design and the accuracy of our theoretical model. This study is also helpful to better design wireless MAC protocols supporting other advanced functionalities such as MU-MIMO.