Backscatter communication is a new wireless communication technology, which can enable battery-free devices to communicate with others by backscattering ambient radio-frequency signals, and therefore has great potential to be deployed in future Internet of Things (IoT) networks. In the existing related studies, the adopted centralized approach might be not suitable for a large-scale IoT network with sporadic backscatter communication, while the adopted distributed approach ignored the demand of the AP. In this paper, we consider a large-scale IoT network consisting of the legacy Wi-Fi communication and the backscatter communication, and aim to propose an efficient distributed backscatter medium access control (MAC) protocol that takes into account of the demand of the AP. In our protocol, when the AP has a demand to collect the information of backscatter devices, it enables backscatter devices to contend for the channel with Wi-Fi devices in a separate manner, where the backscatter devices are only allowed to participate in the contention in a limited time period. We then characterize this constrained contention process and develop a theoretical model to analyze the performance of the proposed protocol. With this model, we can exactly express the per-node throughput of Wi-Fi and backscatter devices. Finally, extensive simulations verify that our model is much accurate, and our protocol can outperform the related protocol in terms of both per-node throughput and system throughput.
14 December 2016 in Peer-to-Peer Networking and Applications
In smart home networks, the traffic is often asymmetric (i.e., the uplink traffic load of a node is not equal to its downlink traffic load). This paper is concerned with how to achieve asymmetric transmission for a full-duplex (FD) IoT network (where the AP and nodes are FD-enabled). Most existing related schemes considered a partial FD network consisting of an FD AP and half-duplex (HD) nodes and achieved asymmetric transmission via PHY-layer mechanisms such as power control. However, for an FD network, the MAC-layer scheduling mechanism might be better to achieve asymmetric transmission than the PHY-layer power-control mechanism which will introduce complex interference management. To this end, we propose a simple and novel MAC scheduling scheme called AT-MAC to support asymmetric transmission in an FD IoT network. In our design, we differentiate uplink-dominant (UD) and downlink-dominant (DD) nodes. Upon receiving a packet, a receiver determines whether to execute a reverse transmission to the peer or to initiate a new transmission to a third node according to the type of UD and DD nodes. Next, we develop a theoretical framework to evaluate the throughput of AT-MAC. The extensive simulations verify that our design is very effective (namely, it can achieve the asymmetric transmission, while fully utilizing the FD gain to maximize the system throughput and lower the packet delay) and our theoretical model is very accurate. This paper is very helpful for designing quality-of-service-oriented FD MAC protocols.
13 January 2022 in Peer-to-Peer Networking and Applications