This study presents a novel video-based risk assessment and safety management technique aimed at mitigating the risk of falling objects during tower crane lifting operations. The conventional YOLOv5 algorithm is prone to issues of missed and false detections, particularly when identifying small objects. To address these limitations, the algorithm is enhanced by incorporating an additional small object detection layer, implementing an attention mechanism, and modifying the loss function. The enhanced YOLOv5s model achieved precision and recall rates of 96.00%, with average precision (AP) values of 96.42% at an IoU of 0.5 and 62.02% across the range of IoU values from 0.5 to 0.95. These improvements significantly enhance the model’s capability to accurately detect crane hooks and personnel. Upon identifying the hook within a video frame, its actual height is calculated using an interpolation function derived from the hook’s dimensions. This calculation allows for the precise demarcation of the danger zone by determining the potential impact area of falling objects. The worker’s risk level is assessed using a refined method based on the statistical analysis of past accidents. If the risk level surpasses a predetermined safety threshold, the worker’s detection box is emphasized and flagged as a caution on the monitoring display.
To reduce land use and avoid further pollution, incineration for power generation has become the main method for municipal solid waste treatment. This research focused on the potential for transforming Municipal Solid Waste Incineration Bottom Ash (MSWIBA) into a finely ground powder. The impact of the powder’s fineness and the amount of water used on its effectiveness was analyzed using a method called grey theory. MSWIBA was used as a partial substitute for cement in making MSWIBA foam concrete and lightweight wall panels. By modifying the fineness and water utilization of the recycled micro-powder, its maximum activity index can be increased to 90.1. This study determined the influence of factors including apparent dry density, water–cement ratio, foaming agent dilution ratio, and admixture dosage on the strength of the recycled foam concrete, and established the optimal mix ratio. This study employed a combination of physical experiments and numerical simulations to elucidate the impact of panel material, core layer thickness, and layer sequence on sound insulation performance. The simulation results were in close agreement with the experimental findings.