In this work, a numerical model is developed to investigate the ion crossover in the vanadium redox flow battery (VRFB). The Donnan effect is considered by introducing an interfacial sub-model at the membrane/electrode interfaces based on the electrochemical potential equilibrium. Using this model, the diffusion and electric field effects on vanadium ions crossover through both the cation- and anion-exchange membranes are quantitively analyzed and the corresponding ion transport mechanisms are explored. The results show that the electric field influences the ions distributions in the membrane thus the transport of ions across the membranes. The properties of ion and membrane are important parameters to determine the electric field induced ion flux. The different dominant transfer ion results in the migration flux and electro-osmotic flux the same directions in the cation-exchange membrane but opposite directions in the anion-exchange membrane, thus a weaker electric field effect for the latter. The net vanadium flux presents the asymmetric characteristic with SOC and current density for both cation- and anion-exchange membranes. Finally, the present work predicts the accumulation of vanadium ions in the positive half-cell for the cation-exchange membrane but an opposite trend for the anion-exchange membrane with cycling.
27 May 2022 in Journal of Electroanalytical Chemistry
In this work, three-dimensional thermal simulations of single 18650 lithium-ion battery cell and 75 V lithium-ion battery pack composed of 21 18650 battery cells are performed based on a multi-scale multi-domain (MSMD) battery modeling approach. Different cooling approaches’ effects on 18650 lithium-ion battery and battery pack thermal management under fast discharging and external shorting conditions are investigated and compared. It is found that for the natural convection, forced air cooling, and/or mini-channel liquid cooling approaches, the temperature of battery cell easily exceeds 40 °C under 3C rate discharging condition. While under external shorting condition, the temperature of cell rises sharply and reaches the 80 °C in a short period of time, which can trigger thermal runaway and may even lead to catastrophic battery fire. On the other hand, when the cooling method is single-phase direct cooling with FC-72 as coolant or two-phase immersed cooling by HFE-7000, the cell temperature is effectively limited to a tolerable level under both high C rate discharging and external shorting conditions. In addition, two-phase immersed cooling scheme is found to lead to better temperature uniformity according to the 75 V battery pack simulations.
27 July 2023 in Journal of Colloid and Interface Science