Additive manufacturing, with its fast development and application of polymeric materials, led to the wide utilization of polylactic acid (PLA) materials. As a biodegradable and biocompatible aliphatic polyester, produced from renewable sources, PLA is widely used in different sectors, from industry to medicine and science. The aim of this research is to determine the differences between two forms of the PLA material, i.e., fused deposition modeling (FDM) printed filament and digital light processing (DLP) printed resin, followed by aging due to environmental and hygiene maintenance conditions for a period of two months. Specimens underwent 3D scanning, tensile testing, and Fourier transform infrared (FTIR) spectrometry to obtain insights into the material changes that occurred. Two-way Analysis of Variance (ANOVA) statistical analysis was subsequently carried out to determine the statistical significance of the determined changes. Significant impairment can be observed in the dimensional accuracies between both materials, whether they are non-aged or aged. The mechanical properties fluctuated for aged FDM specimens: 15% for ultimate tensile stress, 15% for elongation at yield, and 12% for elastic modulus. Regarding the DLP aged specimens, the UTS decreased by 61%, elongation at yield by around 61%, and elastic modulus by 62%. According to the FTIR spectral analysis, the PLA materials degraded, especially in the case of resin specimens. Aging also showed a significant influence on the elastic modulus, ultimate tensile stress, elongation at yield, elongation at break, and toughness of both materials, which was statistically shown by means of a two-way ANOVA test. The data collected in this research give a better understanding of the underlying aging mechanism of PLA materials.

The purpose of this paper is to develop an integrated risk management model for standardized management systems: ISO 9001:2015 for quality management, ISO 14001:2015 for environmental management, ISO/IEC 27001:2013 for information...

New methodology for risk based approach to integrity assessment of pressure vessels has been introduced. Namely, the risk matrix has been defined with consequence taken as usual, whereas probability has been separated into two,...

Welded joints are analysed as critical regions in a pressure vessel in respect to structural failure due to the elastic-plastic fracture/crack growth. To assess structural integrity of pressure vessels used in chemical industry the risk based procedure has been introduced and applied in the case of a large spherical pressure vessel used as a vinyl-chloride monomer (VCM) storage tank in HIP Azotara Pancevo. The risk matrix has been used, taking into account the basic definition of risk, being the product of the probability and consequence, and applied to different regions of welded joints, having different mechanical properties, i.e. crack resistance. To estimate probability, the failure assessment diagram (FAD) has been used, as an engineering tool, defined according to the position of the operating point for different regions of the welded joint, relative to the critical point on the limit curve. Generally speaking, consequence is estimated based on pressure vessel parameters, or by detailed analysis of health, safety, business and security issues, but in the analysed case, the worst case scenario is assumed, with the highest consequence due to potential disaster for environment and fatalities.

This paper presents different aspects of pressure vessel safety in the scope of industrial safety, focused to the chemical industry. Quality assurance, including application of PED97/23 has been analysed first, followed shortly by the risk assessment and in details by the structural integrity approach, which has been illustrated with three case studies. One important conclusion, following such an approach, is that so-called water proof testing can actually jeopardize integrity of a pressure vessel instead of proving it.