Romania has some huge ferrous slag stockpiles that are secondary resources of minerals. Although a sizable portion of ferrous slags is recycled for use in building roads and other infrastructure, a sizable portion is still dumped. By November 2026, Member States must submit information on the quantity of critical raw materials (CRMs) in their secondary resources, as well as the quantification techniques employed, in accordance with Regulation (EU) 2024/1252. Therefore, the XRFS reliable measurements carried on ferrous slags were addressed to prevent dissipative loss of CRMs in cases where an improper slag recycling route is operated. The main novelty of this paper is the method of ensuring the reliability of the XRFS results based on weighted arithmetic mean and on the maximum likelihood approach. Secondly, the XRFS measurements carried on ferrous slags demonstrate that they contain CRMs like Ba, Sr, Y, etc.; however, below the minimum cut-off grade for CRMs, recovery XRFS cannot detect light CRMs. Our preliminary LIBS measurements on ferrous slags disclosed the presence of Li and Be. The drawbacks of the XRFS technique impose further research to develop an integrated XRFS, LIBS, and XRD procedure for comprehensive and trustworthy CRMs screening in extractive waste piles.
The production of a ton of steel in an integrated steel plant generates of approximately 1 ton of ferrous slag. A great part of ferrous slags is recycled in civil and road construction etc., but a huge amount is still dumped. Recycling ferrous slag as cement precursor was considered the upcycling route. Regulation (EU) 2024/1252 requires the Member States to provide information, until November 2026, on the critical raw materials (CRM) amount in their secondary resources and on quantification methods used for. This study addresses two synergic objectives: ensuring the reliability of XRFS results and screening for CRM in ferrous slags based on XRFS outcomes. The main novelty of the paper is the way of ensuring the reliability of the XRFS results based on weighted arithmetic mean and on the maximum likelihood approach. Secondly, the XRFS measurements carried on ferrous slags demonstrate that they contain significant amounts of CRM like Ba, Sr, Y, etc. XRFS cannot detect light CRM. Our preliminary LIBS measurements on ferrous slags disclosed the presence of Li and Be. The drawbacks of the XRFS technique impose further research to develop an integrated XRFS, LIBS and XRD procedure for comprehensive and trustworthy CRM screening in extractive waste piles.