Atomically dispersed Ru-Cu dual-atom catalysts (DACs) with asymmetric coordination are critical for sustainable ammonia production via electrochemical nitrate reduction (NO3RR), but their rational synthesis remains challenging. Here, we report a pulsed discharge strategy that injects a microsecond pulse current into ruthenium (Ru) and copper (Cu) precursors supported by nitrogen-doped graphene aerogels (NGA). The atomically dispersed Ru and Cu dual atoms anchor onto nanopore defects of NGA (RuCu DAs/NGA) through explosive decomposition of the metal salt nanocrystals. The catalyst achieves 95.7% Faraday efficiency and 3.1 mg h−1 cm−2 NH3 yield at −0.4 V vs. RHE. In situ studies reveal an asymmetric RuN2-CuN3 active-site dynamic evolution during NO3RR. Density functional theory calculations demonstrate that asymmetric RuN2CuN3/C structure synergistically optimizes intermediate adsorption and reduces energy barriers of key steps. The pulsed discharge enables ultrafast synthesis of various DACs (e.g., PtCu, AgCu, PdCu, FeCu, CoCu, NiCu) with tailored coordination environments, offering a general-purpose strategy for the precise preparation of atomically dispersed dual-atom catalysts, which are traditionally challenging to synthesize.
Designing asymmetrical structures is an effective strategy to optimize metallic catalysts for electrochemical carbon dioxide reduction reactions. Herein, we demonstrate a transient pulsed discharge method for instantaneously constructing graphene-aerogel supports asymmetric copper nanocluster catalysts. This process induces the convergence of copper atoms decomposed by copper chloride onto graphene originating from the intense current pulse and high temperature. The catalysts exhibit asymmetrical atomic and electronic structures due to lattice distortion and oxygen doping of copper clusters. In carbon dioxide reduction reaction, the selectivity and activity for ethanol production are enhanced by the asymmetric structure and abundance of active sites on catalysts, achieving a Faradaic efficiency of 75.3% for ethanol and 90.5% for multicarbon products at −1.1 V vs. reversible hydrogen electrode. Moreover, the strong interactions between copper nanoclusters and graphene-aerogel support confer notable long-term stability. We elucidate the key reaction intermediates and mechanisms on Cu4O-Cu/C2O1 moieties through in situ testing and density functional theory calculations. This study provides an innovative approach to balancing activity and stability in asymmetric-structure catalysts for energy conversion.
Producing hydrogen peroxide (H2O2) through an electrochemical oxygen reduction reaction (ORR) is a safe, green strategy and a promising alternative to traditional energy-intensive anthraquinone processes. Air and renewable power could be utilized for on-site and decentralized H2O2 production, demonstrating significant application potential. Currently, single atom catalysts (SACs) have demonstrated significant advantages in the catalytic production of H2O2 in 2e− ORR. However, the selectivity of SACs in ORR once puzzled researchers. This article reviews the research on the development and achievements of H2O2 production by SACs catalysis in recent years. Especially, the structure–performance relationship is a guide to designing new SACs. Combining advanced characterization techniques and theoretical calculation methods, researchers have a clearer and more thorough understanding of the impact of the atomic interface of SACs on ORR catalytic performance. The coordination moiety formed between the active metal center atom and the support seriously determines the selectivity of SACs, mainly manifested in the adsorption of *OOH intermediates. Particularly, the atomic interface of metal atoms together with O/N co-coordination exhibit high selectivity and mass activity, and heteroatoms or functional groups on carbon supports present synergistic effects to promote the production of H2O2 in 2e− ORR. Fine and accurate regulation of the atomic interface of SACs directly affects the 2e− ORR performance of the catalysts. Therefore, it is important to deeply understand the atomic interface of SACs and contribute to the development of novel catalysts.
The Fe–FeO–graphene nanocomposite material was produced successfully by pulsed wire discharge in graphene oxide (GO) suspension. Pure iron wires with a diameter of 0.25 mm and a length of 100 mm were used in the experiments. The discharge current and voltage were recorded to analyze the process of the pulsed wire discharge. The as-prepared samples—under different charging voltages—were recovered and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and transmission electron microscopy (TEM). Curved and loose graphene films that were anchored with spherical Fe and FeO nanoparticles were obtained at the charging voltage of 8–10 kV. The present study discusses the mechanism by which the Fe–FeO–graphene nanocomposite material was formed during the pulsed wire discharge process.
The synthesis of large-size graphene materials is still a central focus of research into additional potential applications in various areas. In this study, large-size graphene platelets were successfully produced by pulsed discharge of loose graphite strips with a dimension of 2 mm × 0.5 mm × 80 mm in distilled water. The graphite strips were made by pressing and cutting well-oriented expanded graphite paper. The recovered samples were characterized by various techniques, including TEM, SEM, optical microscopy (OM), atomic force microscopy (AFM), XRD and Raman spectroscopy. Highly crystalline graphene platelets with a lateral dimension of 100–200 μm were identified. The high yield of recovered graphene platelets is in a range of 90–95%. The results also indicate that increasing charging voltage improves the yield of graphene platelets and decreases the number of graphitic layers in produced graphene platelets. The formation mechanism of graphene platelets was discussed. This study provides a one-step cost-effective route to prepare highly crystalline graphene platelets with a sub-millimeter lateral size.