Geopolymer is a sustainable low-carbon cementitious material that is able to incorporate large amounts of solid waste as precursors or activators. As the proportion of municipal solid waste incineration continues to rise in China, the large-scale generation of municipal solid waste incineration fly ash (MSWI FA) has emerged as a significant challenge. The production of geopolymers represents a potential pathway for the comprehensive utilization of MSWI FA. However, most studies have reported that geopolymers containing MSWI FA exhibit low strength, which diminishes their economic value. Furthermore, the unclear environmental risks associated with MSWI FA-based geopolymers have impeded their broader application. This study explores the use of MSWI FA as a substitute for ground granulated blast furnace slag (GGBS) or coal fly ash (CFA) in the production of high-performance geopolymers, achieving compressive strengths exceeding 60 MPa, even when the MSWI FA content reaches 50%. A synergistic effect is observed between MSWI FA and CFA, which enhances the reactivity of CFA. With reasonable formulation, the environmental risks of geopolymers containing MSWI FA are manageable in normal rainfall scenarios. However, there remains a potential risk of soil and groundwater contamination under extreme conditions, such as acid rain.

With the vigorous development of the 5G industry, the characteristic hazardous waste, spent coppery etchant, was also produced in large quantities. In recent years, there are many companies that have begun to collect spent coppery etchant for the purpose of producing recycled products, such as copper sulfate, copper oxide, basic copper chloride, and copper powder, which often contain large amounts of heavy metals. However, due to the lack of relevant standards and applicable regulatory measures, some of the recycled products flow to the feed processing industry and even to the food processing industry. This study investigated the pollution status of heavy metals in recycled products of spent coppery etchant and evaluated the impact of recycled products exposure on human health. The results showed that the content of Zn was the highest, which was 21 times higher than the corresponding standard limit. Human health risk assessment indicated that the hazard quotients of As account for 87.5% of the entire HI value, while the average carcinogenic risk values of As for copper sulfate, copper oxide, basic copper chloride, and copper powder are 1.09 × 10⁻⁵, 3.19 × 10⁻⁵, 1.29 × 10⁻⁵, 7.94 × 10⁻⁶, respectively. Meanwhile, suggestions on the supervision of recycled products and the concentration limits of heavy metals in recycled products were put forward.

The production of titanium dioxide in China generates substantial waste acid and ferrous sulfate, which are repurposed into polyferric sulfate for industrial wastewater treatment. However, this water purification agent contains heavy metals like Ti, V, Mn, Cr, Co, Cu, Ni, Zn, Ba, and Pb, posing unrecognized environmental risks. This study identified these risks through pollutant screening and the process analysis of a Jiangsu-based titanium dioxide enterprise, evaluating the potential impacts on water quality and worker health. The results show that concentrations of manganese and titanium in the polyferric sulfate reached up to 163 mg/L and 631 mg/L, respectively. Notably, the non-carcinogenic hazard quotients (HQs) for cobalt, vanadium, and manganese were 307, 5.6, and 2.6, all exceeding the safe limit of 1, with cobalt presenting a particularly significant risk due to its low reference dose (RfD) of 0.0003 mg/kg-d. This study concludes that national standards should be revised to include limits for these pollutants to ensure safer practices in industrial wastewater treatment.

Selective deposition of lithium into a carbonaceous host is considered an effective strategy to prevent the growth of lithium metal dendrities. However, selective deposition of lithium metal into the inner spaces of a hollow carbonaceous host without nucleation seeds remains challenging. Herein, selective deposition of lithium metal is introduced by utilizing the difference in the nucleation barrier of lithium on the inner and outer surface of graphitic tubes. In situ transmission electron microscopy data indicated that uniform deposition of lithium metal into the hollow surface of graphite tubes occurred in the absence of electrolyte, and continued until the tube was fully filled. To increase the amount of lithium that can be accommodated, we contrived a novel method for preparing supersized graphite carbon tubes (S-GCTs) and demonstrated the relationship between morphology and electrochemical performance. Electrochemical study proved that the S-GCTs exhibited high coulombic efficiency (99.3% over 350 cycles) and long-running lifespan (>1200 h) with a low overpotential (<13 mV). The volumetric capacity of S-GCT reached 1.33 A h L⁻¹, which is superior to that obtained in previous work. The fundamental understanding of how to control Li deposition demonstrated in this work will provide new insight for the rational design of lithium metal batteries.

This study assessed heavy metal contamination in industrial solid waste (S1, S2, S3, and S4) from the Yangtze River Delta region, employing nine risk assessment methods including total content indices (e.g., Igeo, CF) and speciation indices (e.g., ICF, GCF). Four types of industrial solid waste not classified as hazardous but containing heavy metals were analyzed. Key findings revealed significant variability in risk assessments based on chemical speciation versus total content. For example, while S1, S3, and S4 exceeded background levels, S4 showed higher mobility of Pb, Cr (VI), Cu, Ni, and As despite lower overall content. Elements like Cd and Cr (VI) exhibited discrepancies between total content and speciation-based assessments due to low background values and high toxicity. Multi-element indices (DC, RI) indicated higher pollution degrees compared to speciation indices (GCF, GRI). These results underscore the need for integrating multiple assessment methods to accurately evaluate environmental risks in judicial practices.