Geopolymer is a sustainable low-carbon cementitious material that is able to incorporate large amounts of solid waste as precursors or activators. As the proportion of municipal solid waste incineration continues to rise in China, the large-scale generation of municipal solid waste incineration fly ash (MSWI FA) has emerged as a significant challenge. The production of geopolymers represents a potential pathway for the comprehensive utilization of MSWI FA. However, most studies have reported that geopolymers containing MSWI FA exhibit low strength, which diminishes their economic value. Furthermore, the unclear environmental risks associated with MSWI FA-based geopolymers have impeded their broader application. This study explores the use of MSWI FA as a substitute for ground granulated blast furnace slag (GGBS) or coal fly ash (CFA) in the production of high-performance geopolymers, achieving compressive strengths exceeding 60 MPa, even when the MSWI FA content reaches 50%. A synergistic effect is observed between MSWI FA and CFA, which enhances the reactivity of CFA. With reasonable formulation, the environmental risks of geopolymers containing MSWI FA are manageable in normal rainfall scenarios. However, there remains a potential risk of soil and groundwater contamination under extreme conditions, such as acid rain.

With the vigorous development of the 5G industry, the characteristic hazardous waste, spent coppery etchant, was also produced in large quantities. In recent years, there are many companies that have begun to collect spent coppery etchant for the purpose of producing recycled products, such as copper sulfate, copper oxide, basic copper chloride, and copper powder, which often contain large amounts of heavy metals. However, due to the lack of relevant standards and applicable regulatory measures, some of the recycled products flow to the feed processing industry and even to the food processing industry. This study investigated the pollution status of heavy metals in recycled products of spent coppery etchant and evaluated the impact of recycled products exposure on human health. The results showed that the content of Zn was the highest, which was 21 times higher than the corresponding standard limit. Human health risk assessment indicated that the hazard quotients of As account for 87.5% of the entire HI value, while the average carcinogenic risk values of As for copper sulfate, copper oxide, basic copper chloride, and copper powder are 1.09 × 10⁻⁵, 3.19 × 10⁻⁵, 1.29 × 10⁻⁵, 7.94 × 10⁻⁶, respectively. Meanwhile, suggestions on the supervision of recycled products and the concentration limits of heavy metals in recycled products were put forward.

The production of titanium dioxide in China generates substantial waste acid and ferrous sulfate, which are repurposed into polyferric sulfate for industrial wastewater treatment. However, this water purification agent contains heavy metals like Ti, V, Mn, Cr, Co, Cu, Ni, Zn, Ba, and Pb, posing unrecognized environmental risks. This study identified these risks through pollutant screening and the process analysis of a Jiangsu-based titanium dioxide enterprise, evaluating the potential impacts on water quality and worker health. The results show that concentrations of manganese and titanium in the polyferric sulfate reached up to 163 mg/L and 631 mg/L, respectively. Notably, the non-carcinogenic hazard quotients (HQs) for cobalt, vanadium, and manganese were 307, 5.6, and 2.6, all exceeding the safe limit of 1, with cobalt presenting a particularly significant risk due to its low reference dose (RfD) of 0.0003 mg/kg-d. This study concludes that national standards should be revised to include limits for these pollutants to ensure safer practices in industrial wastewater treatment.

Cobalt (Co) is a hazardous element of significant environmental concern, primarily due to its potential leaching toxicity. However, the current assessments of leached Co residues have focused solely on the total cobalt concentration, often overlooking the distinct Co species that contribute to its hazardous nature. This study attempts to determine the impact of cobalt speciation on the toxicity of cobalt and the related hazardous characteristics. The objective of this study is to enhance the understanding of how different Co species influence the environmental toxicity of leached residues. Cobalt speciation is studied by a multivariate analysis including ignitability, reactivity, corrosiveness, acute toxicity, leaching toxicity, and toxic substance concentration. The tested concentrations are compared with the identification standards and technical specifications in China. Co species, particularly cobalt oxide, are identified as the main contributors to the toxicity of the leached Co residue. It is also noted that Co occurrence significantly affects the calculation results of cumulative toxicity, thus impacting the hazard characteristics of leached cobalt residue. The findings benefit risk evaluators and decision makers by offering a new approach for managing leached Co residues and providing a scientific foundation for the development of relevant laws and regulations in China.

The utilization of iron tailings in road construction poses significant environmental risks due to the complex release mechanisms of pollutants and varying regional conditions. This study integrates an exponential decay model with an instantaneous pollutant transport model, employing Monte Carlo simulations to assess risks and regional characteristics. Results show high Potential Hazard Indices (PHIs) for arsenic, manganese, barium, nickel, and lead, with PHI values between 4.2 and 22.7. Simulations indicate that manganese and nickel concentrations may exceed groundwater standards, particularly in humid areas. The study recommends controlling the iron tailings mixing ratio based on climate, suggesting limits of 35% in humid, 60% in semi-humid, and more lenient ratios in arid and semi-arid regions. It also underscores the need for improved risk assessment methodologies and region-specific management strategies at the national level.