Xingxing Liu

Dr. Xingxing Liu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2024 in Buildings
Verified
Journal Article
Open access
PDF file
CZChao Zong
Chao Zong
JZJiajun Zhai
Jiajun Zhai
XSXiaoluan Sun
Xiaoluan Sun
XLXingxing Liu
Xingxing Liu
XCXiaowu Cheng
Xiaowu Cheng
SWShenshan Wang
Shenshan Wang
Timber–concrete hybrid structures are commonly employed in multi-story timber buildings; however, further research is necessary to fully understand the seismic performance of these structures as well as the dynamic properties of the floor. The two dynamic concerns, seismic effects and the vibration of floors in hybrid structures, are key issues, in view of which this study aimed to investigate the small-seismic-response spectra and elastic time histories in a high-rise timber hybrid building, specifically the medical technology building of Jiangsu Provincial Rehabilitation Hospital in China. The dynamic characteristics of a localized cross-laminated timber (CLT) floor were tested in situ, and the impacts of human-induced vibration were quantified. Comprehensive theoretical analysis results reveal that the basic vibration pattern of the structure was mainly translational in nature and that the period ratio, inter-story displacement angle, and shear-to-weight ratio all met the demands of the Chinese timber building design code. The experimental test results show that the vertical natural frequency of the CLT floor was about 15.96 Hz and thus met appropriate requirements with respect to natural frequency. However, peak floor acceleration was found to be high under the conditions of a single person walking quickly, a single person trotting, and multiple persons walking randomly. In light of these findings, the floor should be paved with a fine-grained concrete building surface, according to design requirements, so that its serviceability might be improved. Overall, the relevant analytical methods presented in this paper provide guidance and practical reference for the seismic analysis of timber hybrid structures, as well as vibration serviceability analysis for CLT floors.

20 July 2023 in Buildings
Verified
Journal Article
Open access
PDF file
XLXingxing Liu
Xingxing Liu
WLWeidong Lu
Weidong Lu
KLKaifeng Liu
Kaifeng Liu
FXFengyan Xu
Fengyan Xu
Zhibin LingZhibin Ling
Zhibin Ling
Kong YueKong Yue
Kong Yue
This paper comprehensively investigates the moment-rotation relationship of straight mortise-tenon joints commonly used in Chinese antique timber buildings, focusing on analyzing the local compression mechanism at the tenon end-mortise and the tenon neck-mortise contact areas. Different compression tests were performed, and the experimental compressive stress-strain curves displayed a typical bi-linear response comprising an elastic increasing response followed by a plastic stage. The specimens subjected to middle local compression tests exhibited higher yield stress, elastic modulus, and plastic modulus than the others. Cyclic loading tests were conducted on twelve mortise-tenon joints with varying lengths, widths, and heights of the tenon to investigate the rotational behavior of the joints under alternating loading directions. The hysteresis curves of the tested specimens generally showed a “Z” shaped pinching effect, indicating limited energy dissipation of the joints during cyclic loading. The length and width of the tenon were observed to have a significant influence on the joint rotational behavior. Finally, a theoretical model was proposed to predict the moment-rotation relationship of the mortise-tenon joint, considering the proposed bilinear stress-strain relationship for wood under compression perpendicular to the grain. The predicted results obtained by the proposed theoretical model were generally validated by the experimental results.