Impact force refers to a transient phenomenon with a very short-acting time, but a large impulse. Therefore, the detection of impact vibration is critical for the reliability, stability, and overall life of mechanical parts. Accordingly, this paper proposes a method to indirectly characterize the impact force by using an impact stress wave. The LS-DYNA software is utilized to establish the model of a ball impacting the steel plate, and the impact force of the ball and the impact response of the detection point are obtained through explicit dynamic finite element analysis. In addition, on this basis, a correspondence between the impact force and the impact response is established, and finally, an experimental platform for impact force detection is built for experimental testing. The results obtained by the finite element method are in good agreement with the experimental measurement results, and it can be inferred that the detected piezoelectric signal can be used to characterize the impact force. The method proposed herein can guide the impact resistance design and safety assessment of structures in actual engineering applications.

Butt welding is extensively applied in long-distance oil and gas pipelines, and it is of great significance to conduct non-destructive ultrasonic testing of girth welds in order to avoid leakage and safety accidents during pipeline production and operation. In view of the limitations of large transducer size, single fixed beam angle, low detection resolution and high cost of conventional ultrasonic inspection technologies, a 16-channel piezoelectric micro ultrasonic transducer (PMUT) array probe was developed through theoretical analysis and structural optimization design. After the probe impedance characterization, the experimental results show that the theoretical model can effectively guide the design of the ultrasonic transducer array, offering the maximum operating frequency deviation of less than 5%. The ultrasonic echo performance tests indicate that the average −6 dB bandwidth of the PMUT array probe can be up to 77.9%. In addition, the fabricated PMUT array probe has been used to successfully detect five common internal defects in pipeline girth welds. Due to the multiple micro array elements, flexible handling of each element, large bandwidth and high resolution of defect detection, the designed PMUT array probe can provide a good application potential in structural health monitoring and medical ultrasound imaging fields.

Since light propagation in a multimode fiber (MMF) exhibits visually random and complex scattering patterns due to external interference, this study numerically models temperature and curvature through the finite element method in order to understand the complex interactions between the inputs and outputs of an optical fiber under conditions of temperature and curvature interference. The systematic analysis of the fiber’s refractive index and bending loss characteristics determined its critical bending radius to be 15 mm. The temperature speckle atlas is plotted to reflect varying bending radii. An optimal end-to-end residual neural network model capable of automatically extracting highly similar scattering features is proposed and validated for the purpose of identifying temperature and curvature scattering maps of MMFs. The viability of the proposed scheme is tested through numerical simulations and experiments, the results of which demonstrate the effectiveness and robustness of the optimized network model.

The utilization of hydraulic fracturing technology is indispensable for unlocking the potential of tight oil and gas reservoirs. Understanding and accurately evaluating the impact of fracturing is pivotal in maximizing oil and gas production and optimizing wellbore performance. Currently, evaluation methods based on acoustic logging, such as orthogonal dipole anisotropy and radial tomography imaging, are widely used. However, when the fractures generated by hydraulic fracturing form a network-like pattern, orthogonal dipole anisotropy fails to accurately assess the fracturing effects. Radial tomography imaging can address this issue, but it is challenged by high manpower and time costs. This study aims to develop a more efficient and accurate method for evaluating fracturing effects in tight reservoirs using deep learning techniques. Specifically, the method utilizes dipole array acoustic logging curves recorded before and after fracturing. Manual labeling was conducted by integrating logging data interpretation results. An improved WGAN-GP was employed to generate adversarial samples for data augmentation, and fracturing effect evaluation was implemented using SE-ResNet, ResNet, and DenseNet. The experimental results demonstrated that ResNet with residual connections is more suitable for the dataset in this study, achieving higher accuracy in fracturing effect evaluation. The inclusion of the SE module further enhanced model accuracy by adaptively adjusting the weights of feature map channels, with the highest accuracy reaching 99.75%.