Shaoshuai Zhou

Mr. Shaoshuai Zhou

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2025 in Crystals
Verified
Journal Article
Open access
PDF file
SZShaoshuai Zhou
Shaoshuai Zhou
XSXiaoyong Shu
Xiaoyong Shu
LHLinli Hu
Linli Hu
XYXunyu Yuan
Xunyu Yuan
PQPanpan Qiu
Panpan Qiu
XXXiwen Xu
Xiwen Xu
In order to improve the room temperature yield strength of X and enhance its engineering applicability, a series of CoCr1.7NiYx (x = 0, 0.01, 0.02, 0.03, 0.04, and 0.1 at.%) medium-entropy alloys were synthesized to investigate the effect of Y addition on the microstructures and mechanical properties of the CoCr1.7Ni-based alloy. The X-ray diffraction results show that the alloys exhibit face-centered cubic (FCC) + body-centered cubic (BCC) + hexagonal close packing (HCP) triphasic structure when the Y is adopted, whereas the CoCr1.7Ni-based alloy has a FCC+BCC biphasic structure. The volume fraction of BCC and HCP phase increased with increasing Y content, which led to alloy grain refinement. As a result, the microhardness and strength of alloys were both enhanced. The addition of Y resulted in dispersion strengthening and solid solution strengthening of CoCr1.7Ni alloy, the appearance of HCP, and an increase in BCC, which improved the room temperature yield strength and hardness of CoCr1.7Ni alloy. In particular, for CoCr1.7NiY0.1 alloy, its microhardness and yield strength, respectively, increased by 98.18% and 260.59% as compared with those of CoCr1.7Ni alloy.

25 November 2024 in Materials
Verified
Journal Article
Open access
PDF file
LHLinli Hu
Linli Hu
SZShaoshuai Zhou
Shaoshuai Zhou
XYXunyu Yuan
Xunyu Yuan
XXXiwen Xu
Xiwen Xu
RYRuizhi Ruizhi Yang
Ruizhi Ruizhi Yang
XSXiaoyong Shu
Xiaoyong Shu
The Gleeble-1500 hot simulation experimental equipment was used to investigate the effects of hot simulation compression on PH13-8Mo stainless steel with strain rates ranging from 0.1 to 10 s−1 and deformation temperatures ranging from 900 to 1150 °C. The stress–strain charts for each deformation condition clearly show the characteristics of dynamic recrystallization behavior. The rheological stress rises as the deformation temperature falls and the strain rate rises. A coupled Laasraoui–Jonas (L–J) model was developed based on the discovery that the dislocation density is crucial to the nucleation and micro-structure evolution of dynamic recrystallization during thermal deformation. The findings demonstrate that the model accurately captures the combined action of dynamic reversion and recrystallization inside the material during hot compression of PH13-8Mo stainless steel and that as deformation rises, the dislocation density first increases and subsequently drops. For calculations and numerical simulations of the evolution of the micro-structure under hot compression, the created model was integrated into the DEFORM-3D finite element simulation program. The projected micro-structure evolution of the PH13-8Mo stainless steel under various deformation circumstances is compared to the measured grain distribution, grain size, and the degree of dynamic recrystallization in the metallographic pictures. The fact that the simulated result plots resemble the metallographic charts so closely demonstrates that the L–J dislocation density model can reliably forecast how dynamic recrystallization of PH13-8Mo stainless steel would behave under hot compression.