This paper describes the C-band multi-polarization Synthetic Aperture Radar (SAR) sensor for the Gaofen-3 (GF-3) mission. Based on the requirement analysis, the design of working modes and SAR payload are given. An accurate antenna model is introduced for the pattern optimization and SAR performance calculation. The paper concludes with an overview of predicted performance which was verified by in-orbit tests.

Landslides, a major natural geohazard, obstruct municipal constructions and may destroy villages and towns, at worst causing significant casualties and economic losses. Interferometric Synthetic Aperture Radar (InSAR) technique offers distinct advantages on landslide detection and monitoring. In this paper, a more systematic workflow is designed for InSAR study of landslides, in terms of three levels: (i) early detection on regional scale, (ii) three-dimensional (3D) surface displacement rates estimation on detailed scale, and (iii) time series analysis on long-term temporal scale. The proposed workflow is applied for landslide research on the Xiaojiang River Basin, China, using ascending and descending Sentinel-1 images acquired from March 2017 to May 2019. First, the landslide inventory has been mapped and updated using InSAR stacking method, supporting geohazard prevention on a regional scale. A total of 22 active landslides are identified, ranging from medium to super large scale. Compared with the existing inventory, three unrecorded landslides are newly detected by our approach, and five recorded landslides are detected significant expansion of their boundaries. Then, specific to a detected landslide, Baobao landslide, a Total Least Squares–Kalman Filter-based approach is presented. Two outcomes are provided for further spatial-temporal pattern analysis: 3D displacement rates, providing an intuitive insight on the spatial characteristics and sliding direction of landslide, which are analyzed to deep the understanding of its kinematic mechanism, and long-term time series, which contribute to deduce the dynamic evolution of landslide, presenting benefits in landslide forecasting.

For a spaceborne high-resolution and wide-swath synthetic aperture radar (HRWS-SAR) system, it usually uses the digital beamforming technology. However, in practice, because of the influences of temperature, antenna pattern, receiving antenna, and other error factors, there may exist the range synchronization time errors, amplitude errors, and phase errors among different spatial channels. These nonideal factors will significantly degrade the multichannel data reconstruction performance, resulting in a smeared SAR image. To address this issue, in this article we propose a novel channel error correction algorithm based on the orthogonal projection theory. First, the optimal weight of each Doppler ambiguity component is calculated by the orthogonal projection. Then, the cost function is constructed based on the power maximization criterion, from which the channel phase errors can be obtained. Finally, the HRWS-SAR imaging can be finely realized after performing the channel balancing. Compared with the conventional phase error estimation method, the proposed algorithm does not require to perform the matrix eigenvalue decomposition, avoiding the signal leakage phenomenon under low SNR case. The effectiveness of the proposed algorithm is validated by both airborne and space-borne real SAR data.

The random cropping data augmentation method is widely used to train convolutional neural network (CNN)-based target detectors to detect targets in optical images (e.g., COCO datasets). It can expand the scale of the dataset dozens of times while consuming only a small amount of calculations when training the neural network detector. In addition, random cropping can also greatly enhance the spatial robustness of the model, because it can make the same target appear in different positions of the sample image. Nowadays, random cropping and random flipping have become the standard configuration for those tasks with limited training data, which makes it natural to introduce them into the training of CNN-based synthetic aperture radar (SAR) image ship detectors. However, in this paper, we show that the introduction of traditional random cropping methods directly in the training of the CNN-based SAR image ship detector may generate a lot of noise in the gradient during back propagation, which hurts the detection performance. In order to eliminate the noise in the training gradient, a simple and effective training method based on feature map mask is proposed. Experiments prove that the proposed method can effectively eliminate the gradient noise introduced by random cropping and significantly improve the detection performance under a variety of evaluation indicators without increasing inference cost.

Digital beamforming (DBF) with Scan-On-Receive (SCORE) in elevation is a powerful technique for spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide-swath (HRWS) images. DBF in spaceborne SAR should be implemented in real-time to reduce the volume of the downloaded data. Current digital beamformers in SAR systems usually use phase shift instead of a time delay network to ensure real-time implementation. However, conventional phase shift DBF SAR with narrow array bandwidth is not applicable for broadband signals. The beam steering deviation as a function of frequency is obvious for signals with large fractional bandwidth, which appears as a phenomenon of frequency dispersion. If the signal bandwidth is wider than the array bandwidth, frequency dispersion can significantly deteriorate the signal-to-noise ratio (SNR) and must be well relieved. This article analyzes the frequency dispersion in DBF SAR and proposes an innovative DBF-SCORE scheme with specially designed scalloped beam. The proposed digital scalloped beamforming (DSBF) scheme is effective in relieving the influence of frequency dispersion in DBF SAR. Theoretical analysis and simulation results validate the effectiveness of the proposed scheme. The proposed DSBF scheme gives practical solution to the problem of frequency dispersion in broadband DBF SAR, which makes DBF-SCORE a more practical technique for future spaceborne HRWS SAR.

To achieve high-resolution and wide-swath (HRWS) imaging, a space-time waveform-encoding (STWE) spaceborne synthetic aperture radar (SAR) system is adopted. In rugged terrain, the beam-pointing mismatch problem will appear when the traditional digital beamforming (DBF) technique is used to separate the received echoes. This problem leads to decreasing the received echo’s gain, deteriorating the quality of the image product and making the interpretation of SAR image difficult. To address this problem, an advanced echo separation scheme for STWE spaceborne SAR based on the DBF and blind source separation (BSS) is put forward in this paper. In the scheme, the echoes are transmitted within the adjacent pulse repetition intervals to simulate multiple beams, and the scattered echoes are received by the sixteen-channel antennas in elevation simultaneously. In post-processing, a detailed flow is adopted. In the method, the DBF is firstly performed on received echoes. Due to the error caused by terrain undulation, the degree of echo separation is not enough. Then, the BSS is performed on the multiple echoes obtained after the DBF processing. Finally, the highly separated echo signal can be obtained. In this scheme, there is no need to perform the direction of arrival (DOA) estimation before the DBF processing, which saves valuable computing resources. In addition, to verify the proposed scheme, point target and distributed target simulations based on the 16-channel data of an elevation X-band DBF-SAR system are carried out. The results of point targets indicate that the residual echo caused by rough terrain can be reduced by more than 14 dB using the proposed scheme. The proposed scheme can be directly implemented into existing SAR systems; thus, it does not increase the complexity of the system design. The scheme has the potential to be applied to future spaceborne SAR missions.