In the Earth observation mission of the synthetic aperture radar (SAR), wide swath can be used to complete global monitoring in a short time and high resolution can provide rich detailed information about the feature space and prominent structure and texture. However, the traditional single-channel classical SAR system cannot meet high-resolution and wide-swath (HRWS) imaging demand due to the constraint of minimum antenna area. Fortunately, this fundamental limitation can be overcome by using multiple receive subapertures in combination with advanced digital beamforming (DBF) technique. DBF in elevation can provide high gain and better system performance and has recently gained much attention in the field of SAR imaging. This article presents a 16-channel in elevation airborne X-band DBF-SAR system with 500-MHz bandwidth, characterized by high speed data acquisition and storage, as a test bed to provide the technical reserves and support for a future spaceborne DBF-SAR system in China. The hardware configuration of this system is designed according to a realistic flight mission. To verify the feasibility and operability of this advanced 16-channel DBF-SAR system, an outfield airborne flight experiment was successfully conducted in eastern Guangdong Province in November 2019. Meanwhile, considering the inevitable channel mismatch from airborne system, a precise strategy as well as the underlying signal processing is proposed to process the experiment data. In addition to the channel mismatch due to the topographic height, the Scan-On-Receive (SCORE) pattern loss (SPL) is also an inherent factor, which will deteriorate the output SNR in final SAR images. Therefore, this article also implements a quantitative assessment of SPL combined with the practical flight parameters and the real airborne data. Finally, the corresponding processing results are presented and analyzed in detail. The practical SNR improvement of 11.23 dB emphasize that DBF technology can significantly improve the quality of SAR images and will make an essential contribution to next generation of HRWS technology for environment monitoring.

To achieve high-resolution and wide-swath (HRWS) imaging, a space-time waveform-encoding (STWE) spaceborne synthetic aperture radar (SAR) system is adopted. In rugged terrain, the beam-pointing mismatch problem will appear when the traditional digital beamforming (DBF) technique is used to separate the received echoes. This problem leads to decreasing the received echo’s gain, deteriorating the quality of the image product and making the interpretation of SAR image difficult. To address this problem, an advanced echo separation scheme for STWE spaceborne SAR based on the DBF and blind source separation (BSS) is put forward in this paper. In the scheme, the echoes are transmitted within the adjacent pulse repetition intervals to simulate multiple beams, and the scattered echoes are received by the sixteen-channel antennas in elevation simultaneously. In post-processing, a detailed flow is adopted. In the method, the DBF is firstly performed on received echoes. Due to the error caused by terrain undulation, the degree of echo separation is not enough. Then, the BSS is performed on the multiple echoes obtained after the DBF processing. Finally, the highly separated echo signal can be obtained. In this scheme, there is no need to perform the direction of arrival (DOA) estimation before the DBF processing, which saves valuable computing resources. In addition, to verify the proposed scheme, point target and distributed target simulations based on the 16-channel data of an elevation X-band DBF-SAR system are carried out. The results of point targets indicate that the residual echo caused by rough terrain can be reduced by more than 14 dB using the proposed scheme. The proposed scheme can be directly implemented into existing SAR systems; thus, it does not increase the complexity of the system design. The scheme has the potential to be applied to future spaceborne SAR missions.

Synthetic aperture radar (SAR), an active remote sensing equipment, shares the spectrum with devices in the same frequency band and is therefore easy to affect by pulse radio frequency interference (PRFI). The wideband version of PRFI, i.e., linear-frequency-modulation PRFI (LFM-PRFI), derived from the ground- and space-based radar sensors is a challenging issue for SAR because it usually has a large bandwidth and pulse width compared with the traditional PRFI. The well-known notch filtering methods, including time- and frequency-domain versions, are robust approaches against PRFI, which has been integrated into some SAR ground processing systems. However, the down-range frequency domain notch filtering will increase the sidelobes of the targets when mitigating wideband LFM-PRFI, whereas the time-domain version will introduce ghosts when notching large pulse-width ones. This paper proposed a filtering method that consists of three steps to tackle the above problems. The first step is focusing the energy of LFM-PRFI down-range and cross-range simultaneously, which can be done by match filtering and Fourier transform. The second step is mitigating the LFM-PRFI, which can be done by a designed filter. The last step is data restoration, which can be done by multiplying the conjugate of the phase function used before. Numerical experiments based on simulated SAR data and measured spaceborne SAR data acquired by European Sentinel-1 are performed to test the mitigation performance, which verified the effectiveness and superiority of the proposed approach.

The diverse functions of WASP, the deficiency of which causes Wiskott-Aldrich syndrome (WAS), remain poorly defined. We generated three isogenic WAS models using patient induced pluripotent stem cells and genome editing. These models recapitulated WAS phenotypes and revealed that WASP deficiency causes an upregulation of numerous RNA splicing factors and widespread altered splicing. Loss of WASP binding to splicing factor gene promoters frequently leads to aberrant epigenetic activation. WASP interacts with dozens of nuclear speckle constituents and constrains SRSF2 mobility. Using an optogenetic system, we showed that WASP forms phase-separated condensates that encompasses SRSF2, nascent RNA and active Pol II. The role of WASP in gene body condensates is corroborated by ChIPseq and RIPseq. Together our data reveal that WASP is a nexus regulator of RNA splicing that controls the transcription of splicing factors epigenetically and the dynamics of the splicing machinery through liquid-liquid phase separation.

Due to the atmospheric turbulence, the motion trajectory of airborne very high resolution (VHR) synthetic aperture radars (SARs) is inevitably affected, which introduces range-variant range cell migration (RCM) and aperture-dependent azimuth phase error (APE). Both types of errors consequently result in defocused images, as residual range- and aperture-dependent motion errors are significant in VHR-SAR images. Nevertheless, little work has been devoted to the range-variant RCM auto-correction and aperture-dependent APE auto-correction. In this paper, a precise motion compensation (MoCo) scheme for airborne VHR-SAR is studied. In the proposed scheme, the motion error is obtained from inertial measurement unit and SAR data, and compensated for with respect to both range and aperture. The proposed MoCo scheme compensates for the motion error without space-invariant approximation. Simulations and experimental data from an airborne 3.6 GHz bandwidth SAR are employed to demonstrate the validity and effectiveness of the proposed MoCo scheme.

Digital beamforming (DBF) with scan-on-receive (SCORE) technique in elevation is a powerful technique that enables a spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide swath (HRWS) imaging. In the spaceborne DBF-SAR system, sampling signals from each channel are weighted by weights generated by a digital signal processing system in real-time. However, the contradiction between the shortage of spaceborne hardware resources and resource demand of the multichannel real-time signal processing increases the difficulty of system design. In order to solve this problem, a novel weight generator and an improved intermediate frequency (IF) DBF real-time processing architecture are proposed in this article. By taking advantage of the special properties of the SCORE algorithm, the proposed weight generator calculates weights using a linear polynomial algorithm. The simulation result shows that a low-order approximation can achieve high performance. The proposed generator can correct multichannel amplitude and phase error at a low cost on hardware resources. The effectiveness of the proposed method is verified by experiments with a raw data processing instance of an X-band 16 channels DBF-SAR.