In ex vivo heart perfusion (EVHP), the control of aortic pressure (AoP) is critical for maintaining the heart’s physiologic aerobic metabolism. However, the complexity of and variability in cardiac parameters present a challenge in achieving the rapid and accurate regulation of AoP. In this paper, we propose a method of AoP control based on deep reinforcement learning for EVHP in Langendorff mode, which can adapt to the variations in cardiac parameters. Firstly, a mathematical model is developed by coupling the coronary artery and the pulsatile blood pump models. Subsequently, an aortic pressure control method based on the Deep Deterministic Policy Gradient (DDPG) algorithm is proposed. This method enables the regulation of the blood pump and the realization of closed-loop control. The control performance of the proposed DDPG method, the traditional proportional–integral–derivative (PID) method, and the fuzzy PID method are compared by simulating single and mixed changes in mean aortic pressure target values and coronary resistance. The proposed method exhibits superior performance compared to the PID and fuzzy PID methods under mixed factors, with 68.6% and 66.4% lower settling times and 70.3% and 54.1% lower overshoot values, respectively. This study demonstrates that the proposed DDPG-based method can respond more rapidly and accurately to different cardiac conditions than the conventional PID controllers.
The membrane oxygenator serves as the core component of extracorporeal life support systems, and its gas exchange efficiency critically influences clinical outcomes. However, gas transfer is predominantly limited by the diffusion barrier within the blood-side boundary layer, where saturated red blood cells accumulate. Current research focuses mainly on static approaches such as optimizing fiber bundle configuration to promote passive blood mixing or modifying material properties, which are fixed after fabrication. In contrast, dynamic blood flow control remains an underexplored avenue for enhancing oxygenator performance. This study proposes an active pulsatile flow control method that disrupts the boundary layer barrier by optimizing periodic flow profiles, thereby directly improving gas exchange. A deep reinforcement learning framework integrating proximal policy optimization and long short-term memory networks was developed to autonomously search for optimal flow waveforms under constant flow conditions. A simplified stacked-plate membrane oxygenator was specially designed as the experimental platform to minimize flow path interference. Experimental results demonstrate that the optimized pulsatile profile increases the oxygen transfer rate by without compromising hemocompatibility.
In vitro testing of ventricular assist devices, constructing a mock circulation system that reproduces physiological cardiac function, is critical. However, current ventricular simulators often lack biomimetic fidelity and may introduce hemolysis and coagulation risks during prolonged operation, affecting hemocompatibility assessment. This study proposes a motor-driven torsional 3D-printed left ventricular simulator to reconstruct the hemodynamics of severe heart failure and related pathological conditions. The system integrates a 3D-printed elastic ventricular model with programmable torsional actuation, allowing the simulation of various cardiac conditions by adjusting the motor torsion angle and rotational speed, peripheral resistance and compliance. Fresh porcine blood was circulated for 4 h in a closed-loop system, with periodic measurements of plasma-free hemoglobin (PfHb), thrombin–antithrombin complex (TAT), and P-selectin. The results show that the system successfully reproduces typical hemodynamic features of severe heart failure, while hemolysis and coagulation markers remain low. After 4 h, PfHb was below 20 mg/dL, with no significant platelet activation or thrombosis. This study demonstrates that the proposed system enhances biomimicry while maintaining excellent hemocompatibility, offering a reliable platform for in vitro performance and safety evaluation of ventricular assist devices.