The rapid increase in the population is expected to result in the approaching of design capacity for many US wastewater treatment plants (WWTPs) over the next decade. WWTPs treat both municipal and industrial wastewater influents, resulting in the production of biosolids after digestion. Biogas, a potential recovered alternative energy source, is also produced as an output from successful anaerobic digestion. More than 7M of dry tons/year of biosolids produced in the US are most often disposed in either landfills or land-applied (~80%). These options are becoming more challenging to implement due to increases in transportation costs and tipping fees, decreases in the availability of landfill/landfarm space, and most importantly, increased regulations. This situation is strongly encouraging WWTPs to find alternatives for the disposal of biosolids. Developing alternative management/disposal options for biosolids are evolving. One of the most attractive alternative option from a sustainability perspective are biorefineries (converts waste to commercial products), which are a fast-growing option given the push toward circular urban source economies (little to no waste generation). Anaerobic digestion has been widely applied in WWTPs to reduce the volume of activated sludge due to its low energy requirements, effective handling of fluctuations due to organic loading rate, relative flexibility with temperature and pH changes, and since biogas is produced that can be transformed into energy. Various pretreatment methods for waste sludges prior to digestion that have been studied to reduce solids production and increase the energetic content of the biogas are presented and discussed. Solids handling and management, which comprises ~60% of the operational cost of a WWTP, is estimated to save more than $100 M annually by achieving at least 20% reduction in the annual production of biosolids within the US. This review incorporates an assessment of various pretreatment methods to optimize the anaerobic digestion of waste sludges with a focus on maximizing both biosolids reduction and biogas quality.

The prospect of humans inhabiting planetary bodies is gaining interest among research and development communities, with the moon being considered as a transitory base camp and Mars the next planet humans will inhabit. NASA’s Mission to Mars program is set to have humans inhabiting Mars within on-planet space camps by the Year 2030, which has tremendously increased research and development for space exploration—including research oriented toward human life support in long-term planetary lodging camps. The sustenance of human life on Mars will not be trivial due to the unavailability of an appropriate atmosphere and usable water. This situation requires a self-sustaining human life support system that can provide the basic needs such are breathable air, potable water, food, and energy. The feasibility of sending a payload with resources adequate to support long-term human inhabitation is not reasonable, which means every resource within a Mars space camp is valuable, including human-produced wastes. A biorefinery system that treats wastewater and can also produce valuable products such as oxygen, food, and energy offers a form of circular utilization of valuable resources. To conduct research for such systems requires a wastewater influent that is representative of the wastewater to be generated by the space crew within this isolated, confined environment, which is different from what is generated on Earth due to limited variability in diet, human activity, and lifestyle in this confined area. Collection of actual wastewater influent from an isolated environment supporting humans is challenging. Additionally, to ensure a safe working environment in the laboratory and avoid the imposed threat of handling actual human feces, the proposed synthetic, non-human feces containing wastewater influent formulation offers an easy-to-produce and safer-to-handle option. This paper reviews several synthetic wastewater compositions that have been formulated for space exploration purposes. None of the formulations were found to be realistic nor adequate for a space-camp-type scenario. Thus, the formulation of a synthetic wastewater for simulating a wastewater influent from a human space-based camp is proposed in this paper. In addition, the physical, chemical, and biodegradation characteristics of the final formulation designed are presented to illustrate the value of the proposed influent formulation.

This study focused on demonstrating the use of a self-organizing map (SOM) algorithm to elucidate patterns among variables in simulated syngas combustion. The work was implemented in two stages: (1) modelling and simulation of syngas combustion under various feed composition and reactor temperature implemented in AspenPlus^TM chemical process simulation software, and (2) pattern recognition among variables using SOM algorithm implemented in MATLAB. The varied levels of feed syngas composition and reactor temperature was randomly sampled from uniform distributions using the Morris screening technique creating four thousand eight hundred simulation conditions implemented in the process simulation which consequently produced a multivariate dataset used in the SOM analysis. Results show that cylindrical SOM topology models the dataset at lower quantization error and topographic error as compared to the rectangular SOM topology indicating suitability of the former for variables pattern elucidation for the simulated combustion. Nonetheless, the variables pattern between component planes from rectangular SOM (9 × 28 grid) and those from cylindrical SOM (9 × 28 grid) are almost similar, indicating that either rectangular or cylindrical architectures may be used for variables pattern analysis. The component planes of process variables from trained SOM are a convenient visualization of the trends across all process variables.

Adhesive formulations derived from sustainable feedstocks, like waste-activated sludge and biosolids from wastewater treatment plants, are developed due to protein-based adhesives receiving attention for their low-cost, resourcefulness, and minimal ecological footprint. The protein composition and associated dynamic changes of the adhesive formulations were studied via gel permeation chromatography, which detailed a molecular size distribution of 8.72 × 10⁵ g/mol for the adhesive formulation and 6.89 × 10³ g/mol for the dewatered biosolid base fraction, which confirms the formation of multiple protein functional groups combining to form the larger adhesive molecules. Further analysis determined the types of proteins present in the dewatered biosolids as glutelin, prolamin, globulin, and albumin proteins, with the glutelin proteins as the most prevalent, as thus likely responsible for adhesive formation. The rheological properties of the novel protein adhesive were also studied to interpret the structure of the adhesives, which detailed the findings of viscoelastic properties and flow behaviors of each adhesive in relation to the wastewater treatment plant sample location, which yielded higher flow points, storage moduli, and loss moduli for the dewatered biosolids in comparison to the waste-activated sludge and biosolid adhesives, which correlates with the higher solids content of the dewatered biosolids and potentially cell rupturing when exposed to filtration stress.

Right-of-way (ROW) land areas are required for all publicly owned transportation roadways representing over 40 million acres within the US alone. These relatively unused land assets could support potential farming land for plants and algae that contain high levels of lipids that could be used in the energy industry as an alternative fuel source. This process would offer many benefits including more efficient use of public land, eliminating mowing maintenance, increasing the bioenergy use in the US, providing visually appealing viewscapes, and helping to naturally reduce localized carbon dioxide. This paper analyzed the feasibility and potential optimization strategies of using this concept in the South-Eastern United States by scaling and comparing many of the benefits and risks associated with the selected lipid sources (soybeans, flax, sunflowers, Tung trees, Chinese tallow tree, and microalgae). Based on this assessment, the most attractive option appears to be growing flax in the winter and sunflowers in the summer with Tung Trees grown year-round as an alternative option. This would maximize lipids output while preserving and enhancing right-of-way land areas.

Renewable natural gas is an innovative alternative fuel source that has the potential to integrate seamlessly into the current energy and fuel sector. In addition, growing concerns related to energy security and environmental impact are incentivizing the development of RNG technologies. In conjunction with this document, current technologies related to biogas conditioning and biogas upgrading were covered in a separate analysis deemed Part I. With the current technologies, however, issues such as compositional quality, combustion efficiency, and high operational costs still need to be addressed before RNG can reach its true capability in use. Recent innovations have focused on optimizing techniques and introducing new methods to maximize methane yield and purity while minimizing costs and energy consumption. This document, Part II, provides an overview of emerging technologies related to further biogas upgrading, such as cryogenics, methane enrichment, and hybrid treatments, aimed at increasing cleaned biogas purity. Processes in development are also discussed, including industrial lung, supersonic separation, chemical hydrogenation, hydrate formation, and various biological treatments. The benefits of these advancements are increased purity for the ability to pipeline renewable natural gas in existing infrastructure, help industries reach sustainability goals, and contribute to a more resilient energy system. Together, Parts I and II offer a comprehensive understanding of both current and future technological developments.