We demonstrate an on-chip -doped lithium niobate (LN) microdisk laser. The intrinsic quality factors of the fabricated -doped LN microdisk resonator are measured up to at a 976 nm wavelength and at a 1514 nm wavelength. The multi-mode laser emissions are obtained in a band from 1020 to 1070 nm pumped by a 984 nm laser and with the low threshold of , resulting in a slope efficiency of 0.53% at room temperature. Furthermore, both the second-harmonic frequency of pump light and the sum frequency of the pump light and laser emissions are generated in the on-chip -doped LN microdisk, benefiting from the strong nonlinearity of LN. These microdisk lasers are expected to contribute to the high-density integration of a lithium niobate on insulator-based photonic chip.
We report an electro-optically (EO) tunable microdisk laser fabricated on the erbium ()-doped lithium niobate on insulator (LNOI) substrate. By applying a variable voltage on a pair of integrated chromium (Cr) microelectrodes fabricated near the LNOI microdisk, electro-optic modulation with an effective resonance-frequency tuning rate of 2.6 GHz/100 V has been achieved. This gives rise to a tuning range of 45 pm when the electric voltage is varied between and 200 V.
We demonstrate a hybrid laser microfabrication approach, which combines the technical merits of ultrafast laser-assisted chemical etching and carbon dioxide laser-induced in situ melting for centimeter-scale and bonding-free fabrication of 3D complex hollow microstructures in fused silica glass. With the developed approach, large-scale fused silica microfluidic chips with integrated 3D cascaded micromixing units can be reliably manufactured. High-performance on-chip mixing and continuous-flow photochemical synthesis under UV irradiation at ~280 nm were demonstrated using the manufactured chip, indicating a powerful capability for versatile fabrication of highly transparent all-glass microfluidic reactors for on-chip photochemical synthesis.
We propose a hybrid laser microfabrication approach for the manufacture of three-dimensional (3D) optofluidic spot-size converters in fused silica glass by a combination of femtosecond (fs) laser microfabrication and carbon dioxide laser irradiation. Spatially shaped fs laser-assisted chemical etching was first performed to form 3D hollow microchannels in glass, which were composed of embedded straight channels, tapered channels, and vertical channels connected to the glass surface. Then, carbon dioxide laser-induced thermal reflow was carried out for the internal polishing of the whole microchannels and sealing parts of the vertical channels. Finally, 3D optofluidic spot-size converters (SSC) were formed by filling a liquid-core waveguide solution into laser-polished microchannels. With a fabricated SSC structure, the mode spot size of the optofluidic waveguide was expanded from ~8 μm to ~23 μm with a conversion efficiency of ~84.1%. Further measurement of the waveguide-to-waveguide coupling devices in the glass showed that the total insertion loss of two symmetric SSC structures through two ~50 μm-diameter coupling ports was ~6.73 dB at 1310 nm, which was only about half that of non-SSC structures with diameters of ~9 μm at the same coupling distance. The proposed approach holds great potential for developing novel 3D fluid-based photonic devices for mode conversion, optical manipulation, and lab-on-a-chip sensing.
We demonstrate high-extraction-rate Ta2O5-core/SiO2-clad photonic waveguides on silicon fabricated by the photolithography-assisted chemo-mechanical etching technique. Low-confinement waveguides of larger than 70% coupling efficiency with optical fibers and medium propagation loss around 1 dB/cm are investigated in the experiment. Monolithic microring resonators based on Ta2O5 waveguides have shown the quality factors to be above 105 near 1550 nm. The demonstrated Ta2O5 waveguides and their fabrication method hold great promise in various cost-effective applications, such as optical interconnecting and switching.
In this paper, multifunctional, multilevel phase plates of quartz substrate were efficiently prepared by using a newly developed polygon scanner-based femtosecond laser photolithography system combined with inductively coupled discharge plasma reactive-ion etching (ICP-RIE) technology. The femtosecond laser photolithography system can achieve a scanning speed of 5 m/s and a preparation efficiency of 15 cm2/h while ensuring an overlay alignment accuracy of less than 100 nm and a writing resolution of 500 nm. The ICP-RIE technology can control the etching depth error within ±5 nm and the mask-to-mask edge error is less than 1 μm. An 8-level Fresnel lens phase plate with a focal length of 20 mm and an 8-level Fresnel axicon phase plate with a cone angle of 5° were demonstrated. The diffraction efficiency was greater than 93%, and their performance was tested for focusing and glass cutting, respectively. Combined with the high-speed femtosecond laser photolithography system’s infinite field-of-view (IFOV) processing capability, the one-time direct writing preparation of phase plate masks of different sizes was realized on a 6-inch wafer. This is expected to reduce the production cost of quartz substrate diffractive optical elements and promote their customized mass production.