The main objective of this project is to investigate the viscoelastic behavior of polypropylene material. The theory of viscoelasticity is used to understand how a polypropylene material can be modeled mathematically to make a complete analysis. The time-dependent stress-strain response of the polypropylene material is investigated with the relaxation test that is carried out with the material. Then the required parameters for mathematical models such as elasticity or stiffness, k or E, along with the relaxation time, tau, is found to illustrate this behavior. The response curve from experiments is compared with the analytical study with the theory that includes the mathematical models to complete a finite element analysis on Marc. The curve that is achieved from this analysis overlapped with the one coming from the analytical study. Forced oscillation procedure is carried out in Marc to simulate the dynamic analysis test. Internal energy loss of the specimen is inspected via the hysteresis graph.
In the present study, we developed a moxifloxacin (MXF)-encapsulated liposome-enriched alginate nanocomposite hydrogel coating. MXF was encapsulated in soy lecithin (SL:MXF:2:1) via the probe sonication method with an average efficiency of 80%. Two different manufacturing methods, including a micropipetting and a T-shaped microfluidic junction (TMJ) device technique, were used to incorporate the MXF-encapsulated liposomes into hydrogel matrices and layered as a coating on polymeric substrate material. Drug encapsulation and its incorporation into the hydrogel matrix significantly enhanced its stability and facilitated a prolonged drug release profile. A relatively rapid drug release was observed in the MXF-encapsulated liposome-loaded polymeric particulate layer developed via the micropipetting than the TMJ device technique. The findings confirmed sustained drug release behavior due to a hydrogel particulate structural uniformity conferred by the micromachine device, TMJ. Thus, these nanocomposite hydrogel coatings achieved can serve as a promising candidate for the treatment of ophthalmic or mucosal membrane infections.
Bone is a natural composite of the hierarchical arrangement of mineralized collagen fibrils in various orientations. This study aims to understand how the orientation of the bone mineral, guiding the removal of water contained in the humidity-responsive layers during dehydration, affects its mechanical properties. A sublamellar pattern with mineralized collagen fibrils oriented between 0° to 150° at 5° angles was the model studied. Using basic transformational computational methods, dimensional change was calculated in the transverse and oblique planes of osteonal lamellar bone while considering bone components sensitive to dehydration in radial, tangential, and axial orientations. The anisotropy ratios of the change in the dimension of the variable mineralized collagen fibril orientations calculated using the computed model displayed values ranging between 0.847 to 2.092 for the transverse plane and 0.9856 to 1.0207 for the oblique plane. A comparison of the anisotropy results of the suggested model indicated that they approach the experimental results of both transversely and obliquely cut samples. As collagen fibril and mineral orientation take place both temporally and spatially in relationship with the static and dynamic loads placed on the different volumes of bone, the results may imply that the mechanical demands involved in bone resorption and deposition contribute to the formation of this multi-faceted and hierarchically structured natural composite.
28 May 2026 in European Journal of Pharmaceutics and Biopharmaceutics
Prior research successfully developed polymer optical fibers (POFs) for multimodal polarization-maintaining applications, but these exhibited significant mode coupling due to substantial scattering. Our study investigated the interfacial gel polymerization process using lateral bilayer samples and dynamic light scattering, definitively attributing this scattering to cladding layer leaching into the core. Leveraging this understanding, we engineered and fabricated a double-cladding POF incorporating a middle layer between the core and cladding. Interference microscopy confirmed a uniform core, demonstrating the middle layer’s efficacy in preventing cladding leaching. This work highlights that a strategically placed middle layer can effectively preserve core integrity, offering a crucial advancement for future multimodal polarization-maintaining optical fibers using zero-birefringence polymers and other copolymer-based POFs.
14 January 2026 in Japanese Journal of Applied Physics
To assess the multimode polarization-maintaining performance of polymer optical fibers (POFs) with a zero–zero birefringence core, waveguide characteristics were evaluated. While polarized microscopy revealed a significant reduction in orientational birefringence in the initial prototype, the extinction ratio was not as high as expected due to scattering. In response, two improvements were implemented. For a second prototype, double cladding was applied to suppress scattering. This confirmed the effectiveness of an intermediate layer in preventing core contamination, and photoelasticity reduction was improved. As a third prototype, a poly(methyl methacrylate/2,2,2-trifluoroethyl methacrylate/benzyl methacrylate)-based POF doped with diphenyl sulfide was fabricated and evaluated. It was found that while the zero–zero birefringence composition is disrupted by excessive additive, birefringence can be reduced while the numerical aperture is maintained in an appropriate level.