Superhydrophobic coatings and slippery liquid-infused porous surfaces (SLIPS) have shown their potentials in self-cleaning, anti-icing, anti-erosion, and antibiofouling applications. Various studies have been done on controlling the droplet impact on such surfaces using passive methods such as modifying the lubricant layer thickness in SLIPS. Despite their effectiveness, passive methods lack on-demand control over the impact dynamics of droplets. This paper introduces a new method to actively control the droplet impact onto superhydrophobic and SLIPS surfaces using surface acoustic waves (SAWs). In this study, we designed and fabricated SLIPS on ZnO/aluminum thin-film SAW devices and investigated different scenarios of droplet impact on the surfaces compared to those on similar superhydrophobic-coated surfaces. Our results showed that SAWs have insignificant influences on the impact dynamics of a porous and superhydrophobic surface without an infused oil layer. However, after infusion with oil, SAW energy could be effectively transferred to the droplet, thus modifying its impact dynamics onto the superhydrophobic surface. Results showed that by applying SAWs, the spreading and retraction behaviors of the droplets are altered on the SLIPS surface, leading to a change in a droplet impact regime from deposition to complete rebound with altered rebounding angles. Moreover, the contact time was reduced up to 30% when applying SAWs on surfaces with an optimum oil lubricant thickness of ∼8 μm. Our work offers an effective way of applying SAW technology along with SLIPS to effectively reduce the contact time and alter the droplet rebound angles.
Droplet's impact on arbitrary inclined surfaces is of great interest for applications such as anti-freezing, self-cleaning, and anti-infection. Research has been focused on texturing the surfaces to alter the contact time and rebouncing angle upon droplet impact. In this paper, using propagating surface acoustic waves (SAW) along the inclined surfaces, we present a novel technique to modify and control key droplet impact parameters, such as impact regime, contact time, and rebouncing direction. A high-fidelity finite volume method was developed to explore the mechanisms of droplet impact on the inclined surfaces assisted by SAWs. Numerical results revealed that applying SAWs modifies the energy budget inside the liquid medium, leading to different impact behavior. We then systematically investigated the effects of inclination angle, droplet impact velocity, SAW propagation direction and applied SAW power on the impact dynamics, and showed that by using SAWs, droplet impact on the non-textured hydrophobic and inclined surface is effectively changed from deposition to complete rebound. Moreover, the maximum contact time reduction up to ~50% can be achieved, along with an alteration of droplet spreading and movement along the inclined surfaces. Finally, we showed that the rebouncing angle along the inclined surface could be adjusted within a wide range.
Minimizing droplet impact contact time is critical for applications such as self-cleaning, antierosion or anti-icing. Recent studies have used the texturing of surfaces to split droplets during impact or inducing asymmetric spreading, but these require specifically designed substrates that cannot be easily reconfigured. A key challenge is to realize an effective reduction in contact time during droplet impingement on a smooth surface without texturing but with active and programmable control. Our experimental results show that surface acoustic waves (SAWs), generated at a location distant from a point of droplet impact, can be used to minimize contact time by as much as 35% without requiring a textured surface. Additionally, the ability to switch on and off the SAWs means that a reduction in droplet impact contact time on a surface can be controlled in a programmable manner. Moreover, our results show that, by applying acoustic waves, the impact regime of the droplet on the solid surface can be changed from deposition or partial rebound to complete rebound. To study the dynamics of droplet impact, we develop a numerical model for multiphase flow and simulate different droplet impingement scenarios. Numerical results reveal that the acoustic waves can be used to modify and control the internal velocity fields inside the droplet. By breaking the symmetry of the internal recirculation patterns inside the droplet, the kinetic energy recovered from interfacial energy during the retraction process is increased, and the droplet can be fully separated from the surface with a much shorter contact time. Our work opens up opportunities to use SAW devices to minimize the contact time, change the droplet impact regime, and program or control the droplet’s rebounding on smooth or planar and curved surfaces, as well as rough or textured surfaces.
17 June 2020 in Journal of Physics D: Applied Physics
Nozzleless jetting of droplets with different jetting angles is a crucial requirement for 2D and 3D printing/bioprinting applications, and Rayleigh mode surface acoustic waves (SAWs) could be a potential technique for achieving this purpose. Currently, it is critical to vary the jetting angles of liquid droplets induced by SAWs and control the liquid jet directions. Generally, the direction of the liquid jet induced by SAWs generated from a bulk piezoelectric substrate such as LiNbO3 is along the theoretical Rayleigh angle of ∼22°. In this study, we designed and manufactured thin-film SAW devices by depositing ZnO films on different substrates (including silicon and aluminium) to realize a wide range of jetting angles from ∼16° to 55° using propagating waves generated from one interdigital transducer. We then systematically investigated different factors affecting the jetting angles, including liquid properties, applied SAW power and SAW device resonant frequency. Finally, we proposed various methods using thin-film SAW devices together with different transducer designs for realizing a wide range of jetting angles within the 3D domain. A nozzleless jetting method is proposed using thin-film based surface acoustic wave devices to achieve a wide range of jetting angles for droplets.
Droplets impacting onto surfaces is a common phenomenon in nature and in various industrial applications, such as bioprinting, wind turbine operations, and spray coating. A detailed understanding of the physics underlying the impact dynamics is critical for these applications. However, capturing the details of this process experimentally and developing analytical models to predict the impact characteristic parameters is a challenge. Here, we present a numerical model designed to simulate the dynamics of droplets impacting superhydrophobic surfaces. Following validation against our experimental data, the model is employed to analyze the energy budget within the liquid phase during impact. Subsequently, a series of simulations are conducted to examine the influences of various physicochemical parameters on droplet impact. Our analysis reveals that energy dissipation during droplet spreading increases linearly with the viscosity, density, and droplet size; conversely, an increased surface tension leads to a lower energy dissipation, while the equilibrium contact angle on superhydrophobic surfaces does not significantly affect energy dissipation during the droplet spreading process. Notably, impact velocity plays a critical role in energy dissipation during spreading. These findings provide detailed insights into mechanisms of energy dissipation during droplet impact which would help in developing more accurate analytical models to predict the droplet impact outcome.