Spray drying (SD) is widely used for fruit powder production, but hygroscopic compounds can affect flowability and cause stickiness. This study evaluated rice protein and rice starch as encapsulating agents during SD of blueberry pulp (BPP and BPS, respectively), combined with ozone aeration (BPP-O3 and BPS-O3), focusing on physical, morphological, structural, and bioactive properties, as well as 56-day stability. The process yield was 55.26% (BPP) and 52.5% (BPS) (p < 0.05). All microparticles had low moisture (<5.03%) and water activity (<0.21%). BPP had higher phenolic (308.60 mg GAE/100 g) and anthocyanin content (85.26 mg/100 g), while BPS had more flavonoids (33.84 mg CE/100 g). Ozone treatment increased solubility (89.10–91.27%) and reduced hygroscopicity (9.25–10.06%). Morphological analysis revealed that BPP produced smaller, uniform particles (11.70 µm), whereas BPS generated larger (16.67 µm) and more agglomerated particles. Ozone improved sphericity, reduced agglomeration, and enhanced flow properties. FT-IR analysis indicated no new functional groups but a reduction in absorbance bands. Ozone also enhanced the stability of bioactive compounds, reducing anthocyanin and flavonoid degradation over 56 days. Overall, BPP-O3 is a promising approach for producing functional powders with enhanced stability and physical properties, suitable for food applications.
The objective of this study was to carry out a study on continuous and intermittent drying (intermittency ratio α = 2/3) of osmotically pretreated melon pieces, cut in the form of a parallelepiped. An osmotic dehydration pretreatment was performed using an incubator with mechanical shaking. Drying processes were carried out using an oven with forced air circulation at temperatures of 50 and 70 °C. The data were modeled by means of empirical equations, in order to compare the drying kinetics and analyze the impact of the intermittent process on energy savings and preservation of bioactive compounds in the final product. The experiments were also described using a diffusion model in Cartesian coordinates, with a third-kind boundary condition, in order to analyze the moisture distribution inside each piece of fruit over time. Among the empirical equations analyzed, Page’s was the one that best described the continuous and intermittent drying of osmotically pretreated melon pieces. In order to obtain dried melon, intermittent drying significantly reduced the effective processing time and, consequently, energy consumption, preserving the bioactive compounds more intensely (particularly at a temperature of 50 °C), compared to continuous drying. The diffusion model adequately described all the drying experiments, and it was found that the effective mass diffusivity increased significantly with the application of intermittency.
2 April 2025 in OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA
A atemoia pertence a família das anonáceas, possui casca rugosa e pontiaguda, polpa branca com sementes pretas. O rápido escurecimento e o amolecimento são os principais problemas que afetam a comercialização do fruto in natura, requerendo assim, a introdução de técnicas de processamento que garantam o aumento da vida útil. A secagem em camada de espuma é uma opção de processamento que requer a otimização da formulação elaborada com a matéria-prima e aditivos para a formação de uma espuma estável. Com isso, este trabalho foi desenvolvido com o objetivo utilizar planejamento experimental para avaliar o efeito dos aditivos Emustab e Super Liga Neutra na formação de espumas com a polpa de atemoia. Inicialmente, foi obtida a polpa integral de atemoia e em seguida, foram elaboradas espumas com adição de Emustab e Super Liga Neutra em diferentes concentrações e tempos de batimento de acordo com o planejamento experimental fatorial 23 com 3 repetições no ponto central; a avaliação das espumas foi feita através dos parâmetros de massa específica em função do tempo de batimento, expansão volumétrica (over run) e da cinética da estabilidade das espumas. A polpa integral e as espumas elaboradas, foram analisadas quantos aos parâmetros físicos, químicos e físico-químicos. A polpa integral de atemoia foi considerada pouco ácida, coloração clara e com predominância da intensidade de amarelo. A melhor formulação para formação de uma espuma estável, foi composta por polpa de atemoia, 1,5% de Emustab e 1,5% de Super Liga Neutra, com tempo de batimento de 20 min.
1 January 2024 in Research, Society and Development
Acerola has acquired great importance due to its high vitamin C content and its potential for industrialization. However, during its processing, a quantity of waste (seed and bagasse) is generated, mainly from pulp processing. These residues can be used as new sources of food with high added value and contribute positively to the reduction of environmental impacts. Therefore, this research aimed to add value to the acerola by-product through the development of a functional yogurt. To develop this research, a complete 2² Factorial Planning and Response Surface Methodology were used. The planning included five different levels, with three central points totaling seven tests. The independent variables were: concentration of acerola by-product (%) and brown sugar (%). The responses analyzed were: water content (g/100g), acidity (g/100g), pH, ascorbic acid (mg/100g), reducing sugars (g/100g), and ash (g/100g). The Statística 7.0 software was used to analyze the results of the adopted planning. It was observed that the acerola by-product concentration factor had the greatest influence on the vast majority of responses studied.
1 November 2024 in OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA
A palma (Opuntia e Nopalea), originária do México, é uma cultura amplamente utilizada na alimentação humana, produção de medicamentos, cosméticos, corantes, biogás, e na conservação de solos. Este estudo avaliou a influência das soluções desidratantes de açúcar cristal e mascavo na desidratação osmótica de cubos do parênquima dos cladódios de palma. Foram analisadas as cinéticas de secagem convectiva a 55 e 65 °C, ajustando modelos matemáticos aos dados experimentais. O parênquima foi submetido à desidratação osmótica em soluções de 45 e 55 °Brix a 50 °C, avaliando perda de água, massa e ganho de sólidos, ajustando-se equações exponenciais aos resultados. Os modelos de Midilli, Page e Henderson e Pabis foram aplicados aos dados da secagem convectiva. Observou-se que as cinéticas de perda de água, massa e ganho de sólidos foram influenciadas pela concentração das soluções, com maiores perdas em soluções mais concentradas. Os modelos de Midilli, Page e Henderson e Pabis se ajustaram adequadamente aos dados experimentais, destacando-se o modelo de Midilli para previsão das cinéticas de secagem. Na secagem convectiva, não houve efeito significativo do tipo de açúcar sobre o tempo de secagem, mas o aumento da concentração da solução desidratante prolongou o tempo, enquanto o aumento da temperatura reduziu-o. Esses resultados indicam que a escolha da concentração e temperatura são fatores cruciais para otimizar o processo de secagem do parênquima de palma.
Goat milk is a nutritious food, with high levels of vitamins and minerals. In this context, there is a growing need to improve preservation techniques. Thus, the present work was developed with the aim of drying goat milk using a spray dryer. Chemical, physical, and physicochemical analyses of powdered goat milk and reconstituted goat milk were performed, as well as the characterization of raw goat milk. The statistical model used was the full factorial design 2³ + 3, observing the Pareto Diagram and Analysis of Variance to study the effect of atomization frequency (Hz), inlet temperature (°C), and peristaltic pump rotation (rpm) on the responses for the powdered and reconstituted product. The planning was executed with eleven trials, including nine different trials and three central points. For the analysis of the planning at a 95% confidence level, the Statistica 8.0 software was used. The results showed that atomization frequency and inlet temperature had the greatest effect on the powdered product and the reconstituted food, respectively. Therefore, the importance of drying this food is evident as it offers several advantages for the food industry and consumers.