Naoya WATANABE

Dr. Naoya WATANABE


Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 July 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
TMTakuji Miki
Takuji Miki
MNMakoto Nagata
Makoto Nagata
HSHiroki Sonoda
Hiroki Sonoda
NMNoriyuki Miura
Noriyuki Miura
TOTakaaki Okidono
Takaaki Okidono
KKKatsuya Kikuchi
Katsuya Kikuchi
This article presents a cryptographic key protection technique from physical security attacks through Si-backside of IC chip. Flip-chip packaging leads to a serious security hole that allows emerging backside physical security attacks. The proposed backside buried metal (BBM) structure forming a meander wire pattern on the Si-backside detects unexpected disconnection of the meander and warns the malicious attempts to expose a vulnerable Si substrate. Moreover, the BBM meander also shields key information of cryptographic circuit from both passive side-channel attacks and active laser fault injection as well. Unlike other conventional laminate-based protection, this backside monolithic approach does not require frontside wiring resources or additional packaging layers, resulting in only 0.0025% size-overhead. The BBM meander was formed on the backside of a 0.13-μm CMOS cryptographic chip by wafer-level via-last BBM processing.

22 February 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
KMKazuki Monta
Kazuki Monta
HSHiroki Sonoda
Hiroki Sonoda
TOTakaaki Okidono
Takaaki Okidono
YAYuuki Araga
Yuuki Araga
NWNaoya WATANABE
Naoya WATANABE
MNMakoto Nagata
Makoto Nagata
3-D stacks of complimentary metal-oxide-semiconductor (CMOS) integrated circuit (IC) chips for security applications monolithically embed backside buried metal (BBM) routing with low series impedance and high decoupling capability in a power delivery network (PDN), thanks to distributed capacitances over a full-chip backside area. The 3-D Si demonstrator integrating cryptographic engines was fabricated in a 0.13-μm CMOS technology with post-Si wafer-level BBM Cu processing with 10, 15, and 10 μm of thickness, linewidth, and space, respectively, along with through Si vias (TSVs) with 10 and 40 μm of diameter and depth, respectively. The capacitance of 0.18 nF/mm 2 in the effective backside area of 71 mm 2 suppressed dynamic IR drops in 10% and 59% for the single chip and four chip stack samples, respectively, during the operation of a 3.9 M-gate crypto core at 30 MHz. On-chip power noise monitoring (OCM) was applied in these measurements. The 3-D BBM PDN also effectively reduces power side channel information leakage, which is evaluated by 14× increase in the number of externally observed electromagnetic (EM) noise waveforms to attain the t-test value of larger than 4.5.

1 April 2016 in Microelectronics Reliability
Verified
Journal Article
Closed access
WFWei Feng
Wei Feng
NWNaoya WATANABE
Naoya WATANABE
HSHaruo Shimamoto
Haruo Shimamoto
MAMasahiro Aoyagi
Masahiro Aoyagi
KKKatsuya Kikuchi
Katsuya Kikuchi

1 May 2014
Verified
Conference Paper
Closed access
TBTung Bui
Tung Bui
XCXiaojin Cheng
Xiaojin Cheng
NWNaoya WATANABE
Naoya WATANABE
FKFumiki Kato
Fumiki Kato
KKKatsuya Kikuchi
Katsuya Kikuchi
MAMasahiro Aoyagi
Masahiro Aoyagi
Polymer low-k materials have been considered in literature to meet the requirements of lowering the dielectric constant of the dielectric layer to decrease the problem of signal delay, lower power consumption, and reduce cross-talk between the neighboring paths, as well as, lower the fabrication temperature budget. In this paper, the feasibility of using Parylene-HT as a low-temperature deposition intelever dielectric in 3D interconnection is investigated and the results are presented. In particular, the diffusivities of Cu in room temperature deposited high-uniformity coverage Parylene-HT at 250 o C and 350 o C are evaluated to be 5.7E-18 cm 2 /s and 1.3E-16 cm 2 /s respectively, by dynamic secondary ion mass spectrometry (D-SIMS) technique. In addition, the capability of embedding Parylene-HT in through-Si-via (TSV) fabrication process through the demonstration of 36-μm-diameter 100-μm-depth copper-filled TSVs using Parylene-HT as a liner, are reported.

30 April 2003 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
NWNaoya WATANABE
Naoya WATANABE
TATanemasa Asano
Tanemasa Asano

1 August 2016 in Microelectronics Reliability
Verified
Journal Article
Closed access
WFWei Feng
Wei Feng
TBTung Bui
Tung Bui
NWNaoya WATANABE
Naoya WATANABE
HSHaruo Shimamoto
Haruo Shimamoto
MAMasahiro Aoyagi
Masahiro Aoyagi
KKKatsuya Kikuchi
Katsuya Kikuchi