Tanemasa Asano

Prof. Dr. Tanemasa Asano


Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2019 in Micromachines
Verified
Journal Article
Open access
PDF file
RTRyo Takigawa
Ryo Takigawa
TTToru Tomimatsu
Toru Tomimatsu
EHEiji Higurashi
Eiji Higurashi
TATanemasa Asano
Tanemasa Asano
This paper focuses on the residual stress in a lithium niobate (LN) film layer of a LN-on-insulator (LNOI)/Si hybrid wafer. This stress originates from a large mismatch between the thermal expansion coefficients of the layers. A modified surface-activated bonding method achieved fabrication of a thin-film LNOI/Si hybrid wafer. This low-temperature bonding method at 100 °C showed a strong bond between the LN and SiO2 layers, which is sufficient to withstand the wafer thinning to a LN thickness of approximately 5 μm using conventional mechanical polishing. Using micro-Raman spectroscopy, the residual stress in the bonded LN film in this trilayered (LN/SiO2/Si) structure was investigated. The measured residual tensile stress in the LN film layer was approximately 155 MPa, which was similar to the value calculated by stress analysis. This study will be useful for the development of various hetero-integrated LN micro-devices, including silicon-based, LNOI-integrated photonic devices.

6 May 2019 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
HKHiromu Kojima
Hiromu Kojima
DKDaishi Kido
Daishi Kido
Haruichi KanayaHaruichi Kanaya
Haruichi Kanaya
HIHiroyuki Ishii
Hiroyuki Ishii
TMTatsuro Maeda
Tatsuro Maeda
TATanemasa Asano
Tanemasa Asano
Theoretical analysis of a square-law detector composed of a field effect transistor has been conducted to develop a circuit model for the terahertz (THz) wave detection. Mathematical formulae that indicate the detection characteristics of the detector are derived by applying the unified charge control model of FET channel carriers and by considering drift and diffusion current. The circuit model with an external circuit similar to the actual system is considered. The analysis of the circuit of the detectors reveals the effects of the subthreshold slope and the gate length of FETs on the sensitivity. In addition, square-law detectors have been fabricated using a high-electron-mobility transistor (HEMT) with an InGaAs/InAs/InGaAs double heterostructured channel on a glass substrate. The device has been fabricated using the layer transfer technology and showed electron mobility as high as 3200 cm2/Vs . Detection performance is characterized by directly inputting 1.0 THz waves through a THz probe to detectors. Detection results agree well with the characteristics predicted from the circuit model. Furthermore, our analysis expresses the contribution of drift and diffusion to the total detection characteristics. Experiments carried out using HEMT detectors also prove that the sensitivity, such as maximum voltage responsivity and minimum noise equivalent power of the detectors, is related to the subthreshold slope and the gate length. In other words, a small subthreshold slope and a short gate length of an FET lead to a high-sensitive detection.

30 April 2003 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
NWNaoya WATANABE
Naoya WATANABE
TATanemasa Asano
Tanemasa Asano

16 October 2023 in Measurement
Verified
Journal Article
Closed access
MZMohamed Zaki
Mohamed Zaki
Ragab Abdelaziz El-SehiemyRagab Abdelaziz El-Sehiemy
Ragab Abdelaziz El-Sehiemy
Tamer MegahedTamer Megahed
Tamer Megahed
TATanemasa Asano
Tanemasa Asano
SASobhy Abdelkader
Sobhy Abdelkader

26 February 2014 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
TSTakanori Shuto
Takanori Shuto
KIKeiichiro Iwanabe
Keiichiro Iwanabe
MOMutsuo Ogura
Mutsuo Ogura
KNKatsuhiko Nishida
Katsuhiko Nishida
TATanemasa Asano
Tanemasa Asano
A room-temperature bonding technique using cone-shaped microbumps with the aid of ultrasonic vibration is applied to the fabrication of a near-infrared (NIR) image sensor. The image sensor is fabricated using the chip-on-chip integration of an InGaAs photodiode array on an InP substrate and a Si CMOS readout IC. The pixel pitch is 25 µm to compose quarter-VGA class (320 × 256 pixels) resolution. A high-quality imaging of a heated object is demonstrated. Bonding of the VGA array with 15 µm pitch is attempted to realize a high-resolution image sensor.

1 January 2007
Verified
Conference Paper
Closed access
NWNaoya Watanabe
Naoya Watanabe
TATanemasa Asano
Tanemasa Asano
We demonstrate low-temperature high-density chip-stack interconnection using compliant bump. Low temperature chip stacking was carried out by two methods; (1) plasma cleaning of compliant bumps, (2) mechanical caulking using compliant bump and doughnut-shaped electrode. The latter method is very effective in realizing chip stacking even at room temperature.