Silver nanowire (AgNW)-based transparent conductive films are essential for flexible electronics due to their superior optoelectronic properties and mechanical flexibility. This review examines the characteristics and fabrication methods of AgNW thin films in detail. Among various fabrication techniques, the AgNW thin film produced by silk-screen printing exhibits the highest quality factor of 568.47, achieving 95.3% visible light transmittance of 95.3% and 13.6 Ω/sq sheet resistance. Ensuring the stability of AgNW films requires the deposition of protective layers through physical or chemical approaches. This review also systematically evaluates the different methods for preparing these protective layers, including their respective advantages and limitations. Furthermore, the review proposes strategies to enhance the conductivity, transparency, and flexibility of AgNW films. Finally, it discusses potential future applications and challenges, offering valuable insights for the development of next-generation flexible transparent electrodes.
Silver nanowires (AgNWs)-based transparent conductive films are critical for flexible electronics due to their excellent optoelectronic properties and mechanical flexibility. We discussed the preparation methods of AgNWs films, including Mayer rod coating, spray coating, spin coating, screen printing, and inkjet printing, and analyzed their advantages, limitations, and applicable scenarios. Furthermore, we systematically explored anti-oxidation strategies for AgNWs, such as surface modification, composite structure design, and process optimization. Potential approaches to enhance the conductivity, transparency, and flexibility of AgNWs films were also outlined. Finally, we discussed future applications and challenges, offering insights for the development of next-generation flexible transparent electrodes.
To avoid metal layer oxidation during the deposition of transparent conductive oxide (TCO)/metal/TCO multilayer films in an oxygen-containing atmosphere, the ultra-thin (<10 nm) titanium nitride (TiN) layer has been proposed to replace metal embedding in gallium-doped zinc oxide (GZO) film for the development of indium-free transparent electrodes. The effects of TiN thickness on the structure, morphology, electrical, and optical properties of GZO/TiN/GZO multilayer thin films deposited in argon–oxygen mixtures on glass substrates by magnetron sputtering are investigated. The experimental results reveal that multilayers with the 8 nm-thick TiN layer have the optimal performance (figure of merit of 2.75 × 10−1 Ω−1): resistivity of 4.68 × 10−5 Ω cm, and optical transmittance of above 91% in the visible region, which is superior to the sandwich film with the metal embedded layer.
To develop alternative plasmonic materials for nanophotonic applications, the thickness-dependent optical properties of ultrathin plasmonic Sr0.82NbO3 (SNO) films deposited on MgO are investigated. As the thickness decreases from 10 to 2 nm, the film exhibits less metallic, epsilon-near-zero (ENZ) wavelength redshift and higher optical loss due to increased scattering. Nevertheless, the thinnest film still has a high carrier concentration of 1022 cm−3, and the real part of the dielectric functions of all films is less than zero in the near-infrared (NIR) wavelength region, indicating that the samples possess relatively high metallicity and plasmonic characteristics in the NIR. It is found that the carrier concentration dominates the electron effective mass and Drude plasma frequency. Although Au is a commonly used plasmonic material, at a wavelength of 1550 nm, the loss of SNO is 85.8% lower than that of Au, and its plasmonic performance metrics is significantly higher than TiN, Al:ZnO and Sn:In2O3, demonstrating the great potential of SNO in NIR plasmonic device applications.
(SMO) thin films are deposited on substrates by magnetron sputtering. The effects of ambient temperature on the structural, electrical, and optical properties of the films are investigated. As the temperature increases from 23°C to 800°C, the SMO film exhibits high crystallinity and low electrical resistivity, and the real part of dielectric functions becomes less negative in the visible and near-IR wavelength range, and the epsilon near zero (ENZ) wavelength increases from 460 nm to 890 nm. The optical loss of the SMO film is significantly lower than that of Au, and its plasmonic performance is comparable to or even higher than TiN in the temperature range of 23°C to 600°C. These studies are critical for the design of high-temperature SMO-based plasmonic devices.
Spinel LiNi0.5Mn1.5O4 (LNMO) has emerged as a highly competitive cobalt-free cathode material for higher-energy-density lithium-ion batteries. However, its practical application is hindered by severe capacity degradation, particularly under high-voltage operation. To solve this problem, we put forward a surface modification strategy employing a Li0.4La0.54TiO3 (LLTO) coating. The LLTO coating forms a protective cathode–electrolyte interphase that helps to inhibit interfacial side reactions, enabling enhanced electrochemical performance up to 5 V. As a result, the optimized 1 wt% LLTO-coated LNMO exhibits a remarkable capacity retention of 96.5% after 200 cycles at 0.1 C and delivers a high-rate capacity of 103.5 mAh g−1 at 2 C, significantly outperforming its pristine counterpart (86.8% and 89.6 mAh g−1, respectively). This work provides a viable and efficient surface modification approach for achieving robust high-voltage LNMO cathode material, underscoring its great potential for next-generation energy storage systems.