The Role of Biopolymers in Obtaining Environmentally Friendly Materials | InTechOpen, Published on: 2016-11-30. Authors: Rodolfo Rendón‐Villalobos, Amanda Ortíz‐Sánchez, Efraín Tovar‐ Sánchez, et

The objective of this work was to investigate the effect of zein and film formulation on mechanical and structural properties of native (FNS), and oxidized with 2.5% (FOSA) and 3.5% (FOSB) banana starch. The oxidized starch showed differences from native starch due to the oxidation process, showing a decrease in lipids, proteins, and amylose. The increase of the sodium hypochlorite increased the content of carbonyl and carboxyl groups in the ranges 0.015–0.028% and 0.022–0.031%, respectively. The film obtained from FOSB displayed the highest tensile strength (5.05 MPa) and satisfactory elongation value (27.1%). The zein addition caused a decrease in these mechanical properties, as well as a significant decrease in water vapour permeability (WVP). However, films from FOSA and FOSB showed higher permeability than that of the native starch. The addition of glycerol and the level of oxidation increased the films moisture. Micrographs showed that, during the oxidation process, impurities were largely eliminated from the starch granule, noting more homogeneous structures both in granules and films.

The feasibility of obtaining resistant starch type III (RS3) from malanga flour (Xanthosoma sagittifolium), as an unconventional source of starch, was evaluated using the hydrothermal treatment of autoclaving. The physicochemical characterization of RS3 made from malanga flour was carried out through the evaluation of the chemical composition, color attributes, and thermal properties. In addition, the contents of the total starch, available starch, resistant starch, and retrograded resistant starch were determined by in vitro enzymatic tests. A commercial corn starch sample was used to produce RS3 and utilized to compare all of the analyses. The results showed that native malanga flour behaved differently in most of the evaluations performed, compared to the commercial corn starch. These results could be explained by the presence of minor components that could interfere with the physicochemical and functional properties of the flour; however, the RS3 samples obtained from malanga flour and corn starch were similar in their thermal and morphological features, which may be related to their similarities in the content and molecular weight of amylose, in both of the samples. Furthermore, the yields for obtaining the autoclaved powders from corn starch and malanga flour were similar (≈89%), which showed that the malanga flour is an attractive raw material for obtaining RS3 with adequate yields, to be considered in the subsequent research.

Cellulose fibers are used in polymeric matrices due to their thermal and mechanical capabilities. These biopolymers can be isolated from different natural sources. In this study, micro cellulose was obtained from mango fibrous endocarp (Mangifera caesia Jack ex Wall) waste. Isolation was performed using sulfuric acid and sodium hydroxide as removal agents of lignin and hemicellulose. A comparative analysis between native fiber (NF) and micro cellulose (MC) was performed, using FTIR, DSC and SEM techniques to assess their composition, thermal, structural and crystallinity capacities. The structures of the fibers were not damaged due to the chemical treatments received and their sizes ranged between 40 and 400 μm in length. The extraction of cellulose from mango waste represents an important start in obtaining biopolymers that can be used in the food, pharmaceutical, and other industries.

Vinasses represent important final disposal problems due to their physical-chemical composition. This work analyzed the composition of tequila vinasses and increased 5-hydroxymethylfurfural, furfural, and phenolic compounds using thermal hydrolysis with hydrogen peroxide as a catalyst. A statistical Taguchi design was used, and a UPLC-MS (XEVO TQS Micro) analysis determined the presence and increase of the components. The treatment at 130 °C, 40 min, and 0.5% of catalyst presented the highest increase for 5-HMF (127 mg/L), furfural (3.07 mg/L), and phenol compounds as chlorogenic (0.36 mg/L), and vanillic acid (2.75 mg/L). Additionally, the highest removal of total sugars (57.3%), sucrose (99.3%), and COD (32.9%). For the treatment T130:30m:0P the syringic (0.74 mg/L) and coumaric (0.013 mg/L) acids obtained the highest increase, and the treatment T120:30m:1P increased 3-hydroxybenzoic (1.30 mg/L) and sinapic (0.06 mg/L) acid. The revaluation of vinasses through thermal treatments provides guidelines to reduce the impact generated on the environment.