This paper introduces a 0.5-V, two-stage, pseudo-differential bulk-driven operational transconductance amplifier with high gain and linearity for low-power continuous-time applications. The input stage’s common-mode feedback utilizes a linear resistor detector with a conductance reduction cross-coupled pair to mitigate the loading effect of the common-mode detector resistor at ultra-low power operations. Temperature dependence of the conductance reduction circuit is compensated. The impact of the conductance reduction circuit on linearity performance is explored. The output stage employs a class-AB topology and utilizes a phase lead compensator to stabilize the OTA. Implemented in 180 nm CMOS technology, this OTA achieves a DC gain and slew rate of 68 dB and 26.1 V/ $\mu$ s, respectively, under a capacitive load of 10 pF. The total power consumption is 34.2 $\mu$ W. With unit gain feedback configuration, the measured total harmonic distortion is only 0.02% at an output amplitude of 500 mVpp. Test results validate the proposed circuit, positioning it competitively compared to state-of-the-art designs.
With the development of high-speed analog-to-digital converter (ADC)-based wireline receivers, the Mueller–Muller clock and data recovery (MM-CDR) circuit has garnered increasing attention. But in the design stage, evaluating the loop performance of MM-CDR circuits in ADC-based wireline receivers is challenging due to the absence of a linearized model for a Mueller–Muller phase detector (MMPD). In this paper, a linearized model of the MMPD is proposed by analyzing the output probability of the MMPD in different transition patterns with random jitter injection, and the model is combined with an entire MM-CDR system to analyze the performance of the MM-CDR loop. Analysis of the linearized model and corresponding simulations indicate that when the reference voltage level in the MMPD is set equal to the amplitude of the average crossing voltage at the intersection of 011 and 110 patterns, the MMPD can obtain the maximum gain, which is determined by jitter, and the jitter transfer function and jitter tolerance can achieve optimum performance.