A knurled interference fit is a machine part connection made by a plastic joining, which includes the advantages of commonly-used shaft-hub-connections. The combination of the friction and form fit, which are responsible for torque transmission, results in a higher power density than conventional connections. In this paper, parameter gaps are bridged with the aim of enhance the design calculation of the knurled interference fit. Experimental investigations on the shaft chamfer angle (100Cr6) and hub-diameter-ratio (AlSi1MgMn) were performed. The analytical approaches are developed for calculating the joining force and maximal torque capacity by accounting for experimentally investigated loss of load transmission at high hub-diameter-ratios and high shaft chamfer angles. The presented calculation approach is an accurate tool for the assessment of early machine designs of the knurled interference fit and helps to save from having to perform time-extensive tests.
The striving for energy savings by lightweight construction requires the combination of different materials with advantageous properties. For joining sheet metal components, clinching offers a good alternative to thermal joining processes. In contrast to thermal joining processes, the microstructure in the joining zone remains largely unaffected. Conventional clinch joints, however, have a protrusion on the underside of the joint, which restricts their use in functional and visible surfaces. Flat-clinching minimizes this disadvantage by using a flat anvil instead of a die. Due to the flatness on the underside, it can be used in visible and functional surfaces. This paper deals with the increase of joint strength by using an auxiliary joining element (AJE) in the second forming stage. To achieve optimum improvement in the joint strength of an aluminum Al99.5 H14 sheet metal joint and to save costs, the AJE was varied numerically in terms of volume, material and basic shape. The geometric parameters (e.g., interlocking f and neck thickness tn) do not allow direct derivation of the joint strength. For this reason, the 2D clinch model was extended for the first time to include 3D load models (cross tension, shear tension). To validate the numerical results, optimized flat-clinch joints with AJE and the associated load tests were implemented experimentally. The numerical models were used to improve the process development.