The Luzhou area in the southern Sichuan Basin has experienced multiple tectonic movements, forming a complex fault system; the activity has an important impact on the enrichment of shale gas in this area. In order to reveal the influence of the fracture system on the differential enrichment of shale gas, this paper takes the southern Sichuan Basin as the research object. The structural evolution process and fracture development characteristics of the different tectonic units in Luzhou area of southern Sichuan were characterized by conducting a seismic profile analysis, structural recovery using a back-stripping method, and core hand specimen description. We clarified the control effect of the structural deformation and fracture on the differential enrichment of shale gas, and we established a differential enrichment model of shale gas in the Luzhou area. The results show that: (1) The Luzhou area has undergone the transformation of a multi-stage tectonic movement. There are many sets of detachment structures in the longitudinal direction, and the plane structural form is a thin-skin fold-thrust belt composed of wide and narrow anticlines in the north–south direction. (2) The faults in the study area are affected by the Himalayan tectonic movement. The high-angle reverse faults are developed, and the number of large faults is small. The second and third faults are mainly developed. The second faults are only developed at the high position of the structure, which has a significantly destructive effect on shale gas reservoirs, while the third and fourth faults have no significant destructive effect on shale gas reservoirs. (3) In the study area, the types of cracks are categorized into transformational shear cracks, bed-parallel shear cracks, intraformational open cracks, lamellation cracks, shrinkage cracks, and abnormal high-pressure cracks. The thickness of the shale rock mechanical layer, brittle mineral content, and organic matter content jointly control the crack development degree in the shale of the Wufeng–Longmaxi Formation. (4) The uplift erosion, structural deformation, and fracture development caused by the structural evolution have affected the preservation of shale gas, resulting in the differential enrichment of shale gas reservoirs in the region. Based on the enrichment factors of shale gas, we established a differential enrichment model of shale gas in typical structural units and optimized the favorable enrichment areas, which are important contributions for guiding shale gas exploration and development in the Sichuan Basin.

In order to find out the enrichment mechanism and forming type of deep shale gas, taking the Longmaxi Formation shale in the Desheng–Yunjin Syncline area of Sichuan Basin as an example, we determined the mineralogy, organic geochemistry, physical property analysis, gas and water content, and the influence of three factors, namely sedimentation, structural conditions, and hydrogeological conditions, on the enrichment of shale gas. The results show that Longmaxi Formation shale in Desheng–Yunjin Syncline area is a good hydrocarbon source rock that is in the over-mature stage and has the characteristics of high porosity, low permeability, and high-water saturation. The contents of clay and quartz are high, and the brittleness index is quite different. According to the mineral composition, nine types of lithofacies can be found. The development characteristics of Longmaxi Formation shale and the sealing property of the roof have no obvious influence on the enrichment of shale gas, but the tectonic activities and hydrodynamic conditions have obvious influence on the enrichment of shale gas. The main control factors for shale gas enrichment in different regions are different. According to the main control factors, the gas accumulation in the study area can be divided into three types: fault-controlled gas, anticline-controlled gas, and hydrodynamic-controlled gas. The fault-controlled gas type is distributed in the north of the Desheng syncline and the north of the Yunjin syncline, the anticline-controlled gas type is distributed in the south of the Desheng syncline and the south of the Yunjin syncline, and the hydrodynamic-controlled gas type is distributed in the middle of the Baozang syncline. This result is of great significance for deep shale gas exploration.

Currently, Luzhou in the Sichuan Basin is a focal point for shale-gas exploration and development in China. However, a lack of detailed research on the mineral composition of the Wufeng Formation-Longmaxi Formation (WF-LF) shale is hindering the extraction of deep-buried shale gas in the Luzhou shale play. Herein, a field emission scanning electron microscope (FESEM) equipped with the Advanced Mineral Identification and Characterization System (AMICS) software was employed to analyze the mineral composition of the WF-LF shale from six wells in Luzhou. Quartz was the dominant mineral type, (16.9–87.21%, average 51.33%), followed by illite, calcite, dolomite, and pyrite. Our study revealed that (1) quartz content showed a moderate positive correlation with the total organic carbon (TOC) content, indicating that the quartz found in the shale is mostly of biological origin; and (2) the sum content of siliceous minerals and carbonaceous minerals was moderately positively correlated with the brittleness index (BRIT) in well SS1H2-7 and in the well group of RS8 and RS5, indicating that the siliceous minerals and carbonaceous minerals had an active effect on reservoir compressibility. Finally, according to the mineralogical features of each sublayer, we identified four types of reservoirs to determine their scope for exploration.

When the thermal maturity of the Longmaxi Formation in the southern Sichuan Basin is too high, the pore structure of shale becomes poor. Therefore, to investigate the effect of organic matter thermal maturity on shale pore structure, a study was conducted. Using the Longmaxi Formation shale in the southern Sichuan Basin as an example, the intrinsic relationship between shale porosity, pore structure parameters, organic matter laser Raman maturity, and organic matter graphitization degree was examined using X-ray photoelectron spectroscopy, particle helium porosity measurement, organic matter micro-laser Raman spectroscopy, and gas adsorption experiments. The results indicate that thermal maturity is the macroscopic manifestation of the graphitization degree of organic matter, and the correlation coefficient between the two is 0.85. A thermal maturity of 3.5% (with a corresponding organic matter graphitization degree of 17%) aligns with the highest values of shale porosity, pore volume, and pore-specific surface area across all pore size conditions. The evolution model of shale pore structure can be divided into two stages. The first stage is characterized by a thermal maturity between 2.0% and 3.5% (with a corresponding degree of graphitization of organic matter between 0% and 17%). During this stage, the number and connectivity of micro-macropores increase with increasing thermal maturity. The second stage is marked by a thermal maturity between 3.5% and 4.3% (with a corresponding degree of graphitization of organic matter between 17% and 47.32%). Basement faults are present, leading to abnormally high thermal maturity, poor preservation conditions, continuous generation of micropores, better connectivity, and a reduced number of pores. Medium macropores with good connectivity suffer from gas loss in the fracture network, leading to the collapse and disappearance of pores. The results mentioned in the statement have an important guiding role in the efficient exploration of shale gas in the Longmaxi Formation in the southern Sichuan Basin.

In this study, shale cores from 20 wells in the S1l¹_1-1 sublayer of Longmaxi Formation buried in shallow shale (3500 m) in the southern Sichuan Basin, China were collected to compare their pore structures and gas-bearing properties using multiple experiments. Results showed that the deep layer has relatively lower brittle mineral content, which is disadvantageous in terms of the higher requirements it imposes on hydraulic fracturing. Results also showed that the most important factor controlling the differential enrichment of S1l¹_1-1 shale gas in southern Sichuan Basin is porosity. Moreover, the porosity composition of shallow shale and deep shale has significant differences: the porosity of shallow shale is dominated by organic pores, while for deep shale, both organic and inorganic pores are important. The inorganic pores provide significant storage space for free gas in deep shale; their contribution warrants more attention. We also found that the difference in organic porosity of the shallow and deep shale samples resulted from large differences in pore development ability, while the highest inorganic porosity was concentrated near the optimal mineral composition when the content of quartz plus feldspar plus pyrite was about 70%. This study revealed the primary factor controlling the difference in gas content between shallow and deep shale and detailed the characteristics of microscopic pore structure, providing a basis for the exploration and development of deep shale gas in the Wufeng-Longmaxi Formation in the southern Sichuan Basin.

Tectonic deformation of different intensities significantly controls shale pore structure, seepage channels, and gas content. The Longmaxi Formation shales in the southern Sichuan Basin have experienced multi-stage tectonic movements, resulting in a diverse fracture system and tectonic deformation. This study focuses on three representative tectonic morphologies: deeply buried strongly deformed (DBSD), deeply buried weakly deformed (DBWD) and shallowly buried weakly deformed (LBWD). We investigated the pore structure characteristics and heterogeneity of these shales under various tectonic conditions using total organic carbon (TOC) content, X-ray diffraction (XRD), scanning electron microscopy (SEM), a low-pressure N₂/CO₂ adsorption experiment (LP-N₂/CO₂ GA), and multi-scale fractal theory. The results reveal that strong tectonic compression and deformation conditions lead to the compression and flattening of organic pores by brittle minerals, resulting in long, oriented OM pores. Fracturing of brittle pore creates multiple internal fracture systems linked to dissolution pores, forming a complex micro-fracture–pore network. With intense tectonic deformation, mesopores tend to be compressed, increasing micropore pore volume (PV) and surface area (SA). The DBSD shale exhibits the highest micropore heterogeneity, while the LBWD shale shows the lowest heterogeneity. Fractal analysis indicates a significant decrease in micropore fractal dimension (D_f) with increasing burial depth. In contrast, the surface and matrix fractal dimensions (D_s and D_m) of low-buried shale micropores and meso-macropores align vertically. Shale reservoirs in tectonically stable regions exhibit more favourable gas-bearing characteristics than strongly tectonically deformed areas. The LBWD has stable tectonic conditions that are favourable for shale gas preservation. Conversely, slip faults under deep burial conditions lead to extrusion and deformation of shale pore space, ultimately compromising the original reservoir capacity and hindering shale gas enrichment. These findings contribute significantly to our understanding of pore structure and heterogeneity in tectonically deformed shale reservoirs, providing invaluable guidance for the exploration, development, and prediction of shale gas resources.