The present work deals with the development of a new method for the removal of dyes from an aqueous solution using polyaniline (PANI)–Fe3O4 magnetic nanocomposite. It is synthesised in situ through self-polymerisation of monomer aniline. Photocatalytic degradation studies were carried out for cationic acid violet 19 (acid fuchsine) dye using PANI–Fe3O4 nanocomposite in aqueous solution. Different parameters like catalyst dose, contact time and pH have been studied to optimise reaction condition. The optimum conditions for the removal of the dye are initial concentration 20 mg/l, adsorbent dose 6 gm/l, pH 7. The EDS technique gives elemental composition of synthesised PANI–Fe3O4. The SEM and XRD studies were carried for morphological feature characteristics of PANI–Fe3O4 nanocomposite. The VSM (vibrating sample magnetometer) gives magnetic property of PANI–Fe3O4 nanocomposite; also FT-IR analysis gives characteristics frequency of synthesised PANI–Fe3O4. Besides the above studies kinetic study has also been carried out.
This work deals with the development of an efficient method for the removal of a MG (malachite green) dye from aqueous solution using polyaniline (PANI)–Nickel ferrite (NiFe2O4) magnetic nanocomposite. It is successfully synthesised in situ through self polymerisation of monomer aniline. Adsorptive removal studies are carried out for water soluble MG dye using PANI–Nickel ferrite magnetic nanocomposite in aqueous solution. Different parameters like dose of adsorbent, contact time, different initial conc., and pH have been studied to optimise reaction condition. It is concluded that adsorptive removal by PANI–Nickel ferrite magnetic nanocomposite is an efficient method for removing a MG dye from aqueous solution than work done before. The optimum conditions for the removal of the dye are initial concentration 30 mg l−1, adsorbent dose 5gm l−1 and pH 7. The adsorption capacity is found 4.09 mg g−1 at optimum condition 30 mg l−1. The adsorption followed pseudo-second-order kinetics. The experimental isotherm is found to fit with Langmuir equation. The prepared adsorbent is characterised by techniques SEM, EDS, XRD and VSM.
This work deals with the development of a new efficient method for the removal of methylene blue dye from aqueous solutions by using polyaniline (PANI)–nickel ferrite (NiFe2O4) nanocomposite. It is successfully synthesised in situ through self-polymerisation of monomer aniline. Adsorptive removal studies are carried out for water-soluble methylene blue dye using PANI–nickel ferrite nanocomposite in aqueous solutions. Different parameters such as dose of adsorbent, contact time, different initial concentrations and pH have been observed to optimise reaction condition. It is observed that the adsorptive removal by PANI–nickel ferrite nanocomposite is good comparable with other method for removing methylene blue dye from aqueous solutions. The optimum conditions for the removal of the dye are initial concentration 40 mg/L, adsorbent dose 8 g/L and pH 9. The adsorption capacity is found to be 6.65 mg/g. The adsorption followed pseudo-second-order kinetics. The experimental isotherm is analysed with Freundlich and Langmuir equations. Desorption experiment was performed for recycle and reused study of nanocomposite. The characterisation of prepared adsorbent has been done by techniques such as SEM, XRD and EDS.
The aim of this work was to use a unique technique to maximize the efficiency and cost-effectiveness of biodiesel synthesis utilizing Aloe vera oil. Moreover, in order to facilitate the magnetic separation from the resultant mixture, lipase was immobilized on a magnetic nanocomposite consisting of polyaniline (PANI) and Fe3O4. Utilizing XRD, SEM, TGA and FTIR spectroscopy, the nanocomposite was thoroughly characterized. The results indicated that the immobilized lipase exhibited enhanced thermal stability and a modified optimum pH compared to its free form. Using immobilized lipase also significantly improved the biodiesel conversion yield from 27% with free enzyme to 60%. Remarkably, after five cycles of reutilization in the production of biodiesel, the immobilized lipase retained 90% activity. The catalytic effectiveness of lipase during biodiesel synthesis was significantly enhanced and its resistance to heat and pH fluctuations was strengthened by this novel immobilization approach. Beyond its potential usage in biodiesel production, the PANI-Fe3O4 magnetic nanocomposite also demonstrated photocatalytic removal and degradation of methyl violet dye from aqueous solution.